Lenovouser

Hi, I purchased Honeycomb Bravo on December 15, 2021. Unfortunately I have a problem with thrust number 3. When I go into reserve it scratches. My question ? Do I still have a warranty? I bought it here in Germany via Alternate, or do I have to contact Honeycomb? Thanks

Hi, I noticed a problem yesterday. I did KORD-KJFK. In KORD I had about 30-45 FPS and GPU power of about 300-320 watts. As soon as I'm in the air, the GPU power goes down to 160 watts and it stays that way... Even if there are a lot of clouds it stays at 160 watts. Of course I also have a low FPS, often 25 FPS in the air. Then when I landed in KJFK I still had 160 watts... and had up to 10 FPS and very jerky... After landing, I finished P3D and loaded KJFK again and lo and behold again 300 to 320 watts and have 30-40 FPS... My question is, why does the GPU power stay low? why doesn't KJFK go up before landing? As I said, if I load KJFK again, I have 300 watts and around 30-40 FPS I set maximum performance in Nvidia Settings (RTX 3080 12GB). Do you have any tips?

Hi, P3D is actually very stable for me and once even ran for 1500 hours without any crashes. But every now and then I find the autosave option useful. I currently use Volanta's autosave function. But it costs me a monthly fee and I only have the subscription because of Autosave. I saw the FSUIPC purchase version that has an autosave function. Can somebody say something about this ? Does it work well? does it cause problems? I read earlier that you shouldn't use autosave. But in Volanta it works very well. But I don't feel like spending money every month. thx

I currently have CTD more often without an error message, and there is nothing in the event viewer either. can CTD also have something to do with the affinitymask setting?

Hi, I recently bought a used MCP from OpenCockpits V3 Unfortunately I discovered a problem with MCP. At some point during operation, which can happen after 20 minutes or even after 3 hours, the MCP no longer reacts. I have to unplug the power cable from MCP and plug it back in, but also need to restart the software until it responds. I can almost rule out software problems because I also had the problem with SPADNEXT. I also bought the complete software from flightsim4fun. The problem is really very strange and occurs very sporadically, it can cause no problems for several hours or it happens every 10 to 20 minutes. Somehow I have the feeling that MCP has a quirk. Does anyone else have an OpenCockpits MCP here? knows such problems?

Hi, I'm a bit further. Today comes a power supply from Amazon and I'm curious if it works with it. I've had problems with Spadnext for the last few days, although the program has never caused any problems, it has had problems with MCP Panel. So I bought the complete software for MSFS and P3D from flightsim4fun. It cost over 100 euros, but I would say it's worth every penny. I also had problems with the installation, but flightsim4fun's support was very helpful here, even though it was very late. Now everything works perfectly

Yes, there is Spadnext. I've had a license for 2 years and didn't know that Spadnext OpenCockpits supports hardware. Started Spadnext yesterday, selected a profile and it works. it is even completely discontinued. I have another question about the power supply: The power supply, which I noticed, unfortunately has a wobbler and has to order a new one. I also bought EFIS from OpenCockpits, but it didn't come with a power supply. That's why I don't have a backlight. I wanted to order the power supply from OpenCockpits, but they want a tax number from me, which I find complicated. Can I also buy the power supply from Amazon? which ones will i need exactly? and one last question. When I shut down my PC, the light stays on at MCP. Is there a way to turn it off?`or do I have to unplug the cable every time? Thanks

Hi, thank you for the link. I got the hardware and have a question. Do I have to buy the software on the homepage? Once the software costs 29 euros or 49 euros? which do i need ? And do I have to buy the software? are there no OpenCockpits programs?

Hi, Thank you for your answer. I spoke to the seller and it is the V3 version. MCP 737NG V3H He made me an offer for 300 euros, which I think is fine. Is the quality of OpenCockpits MCP okay? can you recommend it? Thanks

Hi, I currently have an offer for an MCP from OpenCockpits. This is about the V2 (I think the current V3 is) I got an offer for 300 euros and am considering whether I should buy it. The V3 is available from OpenCockpits for 491 euros. I wonder if I should still buy V2? I looked in google but didn't find any posts to compare V2 and V3. That's why I wanted to ask you what you think of it? and if anyone has MCP from OpenCockpits ? I would like to take it for 737 , 777 and 747 in P3D and for 737 in MSFS. Will the V2 software still work for the simulators?

Hi, a friend of mine with an Intel 13700k CPU has temps of up to 100 degrees again and again. Is there an AffinityMask setting? I sent him mine from 5800x3d, but not much has happened Thx.

Hi, I can get a VRInsight CDU III panel very cheaply. I wanted to ask you if it's still worth it? Because as I have read, it has been on the market for a long time and is no longer supported? I wanted it for PMDG 777 (all models) and 747 and maybe 737. But the description says PMDG 777-200LR or PMDG 737NG Does it mean that I can't use it for 777F or 747? It still costs over 600 euros from Aerosoft and I can get it for 200 euros, but the price made me a little suspicious because I think it's cheap.. Because maybe it's not supported anymore.

I think it's more about distributing CPU load. Don't expect more FPS. With SteveW's AffinityMask setting, my computer is unrecognizable. Before that I always had a load of 100% and temps up to 90 degrees. After the setting, I never saw 100% load again, the CPU is significantly cooler. With the AffinityMask setting, cpu load is optimally distributed. I am still very grateful to SteveW. P3D was briefly dead for me because of my problems. But now everything is going great again

It is difficult to compare an Intel CPU 9900 directly with an AMD 5800X3D. It is known that 5800X3D can get quite warm CPU. I landed earlier and was often around 74 degrees in the air, which is perfectly ok for the CPU. I reach a maximum of 74 degrees in Cinebech, otherwise in other games the cpu does not go above 70 to 75 degrees.. I rarely play because the pc was mainly configured for P3D. I have another windows installation with MSFS, the cpu rarely goes above 60-65 degrees .. but here, too, it is difficult to compare msfs with p3d. I want to say again that my cpu temps were fine. my computer only blocked with the old setting in p3d and the temps were permanently high. currently it is great again..

I have AVIA Sever , and here P3D has to run with admin mode

@SteveW, THANK YOU It was that attitude. I'm doing EPKK-ENVA right now. On the ground I was always around 60 degrees. In the air I once had short peaks of 85 degrees. But now that I'm at cruise level, the CPU moves between 75 degrees and 80 degrees. But 90% of the time I see 75-77 degrees. That's really great. Before that I always had 85 and again and again 90 degrees. The whole computer was lame and all other programs jerked. Now everything runs smoothly again as it was under 5.3. Thank you again. For me P3D is back again 🙂

Yes the CPU voltage is on AUTO (Mainboard : Asus Crosshair Hero X570) If I set the voltage, the CPU will always run at 1.35 without clocking down Maybe I can set something about offset settings

Yes, I have that too with default scenery and F35

[Global] [JobScheduler] AffinityMask=65535 P3DCoreAffinityMask=65535 MainThreadScheduler=0 RenderThreadScheduler=2 FrameWorkerThreadScheduler=4

Yes

Job scheduler I can post tonight. The CPU has 8 cores and SMT is active in the bios

sorry fixed

First I want to say that I have no problems with temps. My temps are the same as always, in MSFS the CPU doesn't get above 65 degrees, rather below 60 degrees.. Even in games, the CPU never reaches over 70 degrees. I also get Cinebench a maximum of 74 degrees. I have never seen 90 degrees, except in Prime 95. I don't understand how P3D can chase the CPU up to 90 degrees. It's not always 90 degrees, more like 82 to 85 degrees, which I find high. I actually always do very long flights with P3D and have little desire to load the CPU like that. To this day I don't understand why I have 60 degrees on the ground with the fat Addon Airport, and as soon as I take off it's 80 to 91 degrees. There's a 20 to 30 degree difference. even when flying over Greenland I have 85 degrees although there is nothing there. Here is my setup: AMD 5800x3D 32GB RAM NVIDIA RTX 3080 12GB 43.4 inch monitor with 3840x1200 resolution. I monitor the temps via HWinfo and Streamdeck, so I always see the temps

Hi, I give a status: I completely deleted P3D 2 days ago and reinstalled V5.4. I also deleted all add-ons, airports, ORBX packages, Active Sky, GSX to do a completely clean installation. I installed V5.4 and additionally: Active Sky PMDG 777-747 ORBX packages with Global and LC FSUIPC GSX In addition, 2 x airports PANC and KSFO Then tried the first test from PANC to KSFO.... And here the same thing again, after the start the temps go up to 90 degrees. The whole computer feels slow. Navigraph, or Volanta Maps stutters, even surfing on Chrome stutters as soon as I take off with a plane. It's extremely frustrating, it took me 6-7 hours to install, and everything installed cleanly. I just don't understand the problem.. Something like this has been happening for more than 2 years after more than 2000 flight hours. I'm so frustrated that I'm getting tired of P3D. I've really tried very hard the last few days, practically sat in front of the computer for several days, but it just doesn't want to work the way it used to. Although I did not update but completely reinstalled. I do not get it

Sorry, Wrong Thread