May 30, 201610 yr I have just ran the latest makerwys.exe from Peter Dowsons website. I put the file in the main FSX directory but the r4.csv file in RC4.3 did not update but the r5.csv in the FSX folder did update. Can someone tell me how to fix this problem so that I have the correct runway listing in RC4.3? Thanks Don Don Lillard
May 30, 201610 yr Unless you are on a networked client to an FS host you should not be running make runways directly in your FSX folder answering no to the are you on a network prompt.. Run the RC scenery rebuild from its application (be sure RC is set to run as admin either by modifying a shortcut to it or right clicking on rcv4.exe. (If you run FS9 as this will have to be repeated starting the rebuild from within the second rc folder you set up for FS9.)). Be sure you give the correct path to your FSX or FS9 (or P3D) folder when asked by the scenery rebuild prompts. RC executes makerunways.exe and when that finishes and you OK it will copy r5.csv (which you say did update) to its rcv4 or rcv4x data folder as r4.csv. (Your r4.csv then becomes a duplicate of r5.csv.) It will then update a4.csv (the airport calculated center coordinates) from r4.csv. If you still have trouble you can run run makerwys directly in your FSX/FS9 folder, Then start the RC scenery rebuild answering yes to the network question and giving the correct path to your FS version. It will then start by copying r5.csv to rcv4/data folder as r4.csv then build a4.csv from that. Be sure you OK all of the prompts and wait a few seconds before exiting rc to allow the HD writing to catch up. To check on whether everything updated right click in your FS folder r5.csv and note the time and date and size listed in its properties. Now do the same for r4.csv in rc's data folder. It should match within a couple of seconds. a4.csv should show a modification date a few seconds later allowing it to get built by RC. The r4.csv file in your FS folder is not longer used,
May 30, 201610 yr Author Thanks for your help. I achieved partial success. As an example KSEA and KTPA have all of the correct runways which previously they did not. However KCLT does not have the 18/36C runways. PAFA did not update at all but shows 2L in the gate box when you open the controller info dialog box. This is the correct runway but the info is in the wrong location. Any ideas? Thanks Don Don Lillard
May 30, 201610 yr It sounds like a possibly corrupted field sequence for PAFA. Try this: In your FS folder there is a huge file called runways.txt. This is a log of all of the makerwys operations. Right click on it and open it in Word, not Excel or other spreadsheet. Notepad can not handle it. Search for Airport KCLT until you get to the last section. Look at the runway list. Do the same for PAFA. Except for default scenery, each add-on will have a deletion section followed by the scenery elements section. They may not be adjacent. The last section has priority. The start of each section has the path to it and make sure it is correct. Here are some examples from my FS9 scenery: Here is part of the default KCLT: Airport KCLT :N35:12:50.4200 W080:56:35.2502 748ft Country Name="United States" City Name="Charlotte" Airport Name="Charlotte-Douglas Intl" in file: Scenery\NAME\scenery\AP926190.BGL Runway 18R/36L centre: N35:12:49.2862 W080:57:07.1794 748ft Start 18R: N35:13:36.9058 W080:57:11.2717 748ft Hdg: 176.0T, Length 10015ft Computed start 18R: Lat 35.227394 Long -80.953174 Start 36L: N35:12:01.6665 W080:57:03.0868 748ft Hdg: 356.0T, Length 10015ft Computed start 36L: Lat 35.199989 Long -80.950817 Hdg: 175.980 true (MagVar -6.100), Concrete, 10015 x 150 ft Primary ILS ID = IPEP Primary ILS: IPEP 111.30 Hdg: 176.0 , Flags: GS BC "ILS 18R" Secondary ILS ID = IDQG Secondary ILS: IDQG 111.70 Hdg: 356.0 , Flags: GS BC "CAT III ILS 36L" *** Runway *** KCLT0182 Lat 35.227394 Long -80.953171 Alt 748 Hdg 182 Len 10015 Wid 150 ILS 111.30, Flags: GS BC *** Runway *** KCLT0361 Lat 35.199989 Long -80.950821 Alt 748 Hdg 2 Len 10015 Wid 150 ILS 111.70, Flags: GS BC Runway 18L/36R centre: N35:12:46.2087 W080:56:06.5093 748ft Start 18L: N35:13:27.3171 W080:56:10.0403 748ft Hdg: 176.0T, Length 8686ft Computed start 18L: Lat 35.224720 Long -80.936165 Start 36R: N35:12:05.1327 W080:56:02.9785 748ft Hdg: 356.0T, Length 8686ft Computed start 36R: Lat 35.200954 Long -80.934120 Hdg: 175.980 true (MagVar -6.100), Asphalt, 8686 x 150 ft Primary ILS ID = IVKQ Primary ILS: IVKQ 110.35 Hdg: 176.0 , Flags: GS BC "ILS 18L" Secondary ILS ID = IBQC Secondary ILS: IBQC 108.90 Hdg: 356.0 , Flags: GS DME BC "CAT III ILS/DME 36R" *** Runway *** KCLT0181 Lat 35.224720 Long -80.936165 Alt 748 Hdg 182 Len 8686 Wid 150 ILS 110.35, Flags: GS BC *** Runway *** KCLT0362 Lat 35.200954 Long -80.934120 Alt 748 Hdg 2 Len 8686 Wid 150 ILS 108.90, Flags: GS DME BC Runway 5 /23 centre: N35:12:56.8016 W080:56:25.9805 748ft Start 5 : N35:12:33.3481 W080:56:58.3361 748ft Hdg: 48.4T, Length 7501ft Computed start 5 : Lat 35.208950 Long -80.949968 Start 23 : N35:13:20.2875 W080:55:53.6234 748ft Hdg: 228.4T, Length 7501ft Computed start 23 : Lat 35.222607 Long -80.931135 Hdg: 48.400 true (MagVar -6.100), Asphalt, 7501 x 150 ft Primary ILS ID = ICLT Primary ILS: ICLT 110.95 Hdg: 48.4 , Flags: GS BC "ILS 05" Secondary ILS ID = IAPU Secondary ILS: IAPU 109.50 Hdg: 228.4 , Flags: GS DME BC "ILS/DME 23" *** Runway *** KCLT0050 Lat 35.208950 Long -80.949966 Alt 748 Hdg 55 Len 7501 Wid 150 ILS 110.95, Flags: GS BC *** Runway *** KCLT0230 Lat 35.222607 Long -80.931137 Alt 748 Hdg 235 Len 7501 Wid 150 ILS 109.50, Flags: GS DME BC COM: Type=8 (APPROACH), Freq=120.05, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=120.50, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=124.00, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=128.32, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=134.75, Name="CHARLOTTE" COM: Type=1 (ATIS), Freq=121.15, Name="KCLT" COM: Type=1 (ATIS), Freq=132.10, Name="KCLT" COM: Type=7 (CLEARANCE), Freq=127.15, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=120.05, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=120.50, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=124.00, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=128.32, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=134.75, Name="CHARLOTTE" COM: Type=11 (FSS), Freq=122.40, Name="RALEIGH" COM: Type=5 (GROUND), Freq=121.80, Name="CHARLOTTE" COM: Type=5 (GROUND), Freq=121.90, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=125.35, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=126.15, Name="CHARLOTTE" COM: Type=6 (TOWER), Freq=118.10, Name="CHARLOTTE" COM: Type=6 (TOWER), Freq=126.40, Name="CHARLOTTE" COM: Type=3 (UNICOM), Freq=122.95, Name="CHARLOTTE/DOUGLAS INTL"--------- Here is a deletion section for an add-on AFCAD for KCLT: Addon Scenery\scenery\F1UT_KCLT.bgl=============================================================================Deletions check for Airport KCLT: Delete all taxiways! Delete all runways and starts! *** DelBth *** KCLT0050 Lat 35.208950 Long -80.949966 Alt 748 Hdg 55 Len 7501 Wid 150 ILS 110.95, Flags: GS BC *** DelBth *** KCLT0181 Lat 35.224720 Long -80.936165 Alt 748 Hdg 182 Len 8686 Wid 150 ILS 110.35, Flags: GS BC *** DelBth *** KCLT0182 Lat 35.227394 Long -80.953171 Alt 748 Hdg 182 Len 10015 Wid 150 ILS 111.30, Flags: GS BC *** DelBth *** KCLT0230 Lat 35.222607 Long -80.931137 Alt 748 Hdg 235 Len 7501 Wid 150 ILS 109.50, Flags: GS DME BC *** DelBth *** KCLT0361 Lat 35.199989 Long -80.950821 Alt 748 Hdg 2 Len 10015 Wid 150 ILS 111.70, Flags: GS BC *** DelBth *** KCLT0362 Lat 35.200954 Long -80.934120 Alt 748 Hdg 2 Len 8686 Wid 150 ILS 108.90, Flags: GS DME BC Delete all taxiways! COM: Delete all frequencies! ---------------------------------- and here is the add-on scenery elements: Addon Scenery\scenery\F1UT_KCLT.bgl=============================================================================Airport KCLT :N35:12:50.4200 W080:56:35.2502 748ft Country Name="United States" State Name="North Carolina" City Name="Charlotte" Airport Name="Charlotte-Douglas Intl" in file: Addon Scenery\scenery\F1UT_KCLT.bgl Runway 18R/36L centre: N35:12:49.2862 W080:57:07.1794 748ft Start 18R: N35:13:36.9058 W080:57:11.2717 748ft Hdg: 176.0T, Length 10015ft Computed start 18R: Lat 35.227394 Long -80.953174 Start 36L: N35:12:01.6665 W080:57:03.0868 748ft Hdg: 356.0T, Length 10015ft Computed start 36L: Lat 35.199989 Long -80.950817 Hdg: 175.980 true (MagVar -6.100), Concrete, 10015 x 150 ft Primary ILS ID = IPEP *** No matching ILS record - assume provided by another layer Secondary ILS ID = IDQG *** No matching ILS record - assume provided by another layer *** Runway *** KCLT0182 Lat 35.227394 Long -80.953171 Alt 748 Hdg 182 Len 10015 Wid 150 *** Runway *** KCLT0361 Lat 35.199989 Long -80.950821 Alt 748 Hdg 2 Len 10015 Wid 150 Runway 18L/36R centre: N35:12:46.2087 W080:56:06.5093 748ft Start 18L: N35:13:27.3171 W080:56:10.0403 748ft Hdg: 176.0T, Length 8686ft Computed start 18L: Lat 35.224720 Long -80.936165 Start 36R: N35:12:05.1327 W080:56:02.9785 748ft Hdg: 356.0T, Length 8686ft Computed start 36R: Lat 35.200954 Long -80.934120 Hdg: 175.980 true (MagVar -6.100), Asphalt, 8686 x 150 ft Primary ILS ID = IVKQ *** No matching ILS record - assume provided by another layer Secondary ILS ID = IBQC *** No matching ILS record - assume provided by another layer *** Runway *** KCLT0181 Lat 35.224720 Long -80.936165 Alt 748 Hdg 182 Len 8686 Wid 150 *** Runway *** KCLT0362 Lat 35.200954 Long -80.934120 Alt 748 Hdg 2 Len 8686 Wid 150 Runway 5 /23 centre: N35:12:56.8016 W080:56:25.9805 748ft Start 5 : N35:12:33.3481 W080:56:58.3361 748ft Hdg: 48.4T, Length 7501ft Computed start 5 : Lat 35.208950 Long -80.949968 Start 23 : N35:13:20.2875 W080:55:53.6234 748ft Hdg: 228.4T, Length 7501ft Computed start 23 : Lat 35.222607 Long -80.931135 Hdg: 48.400 true (MagVar -6.100), Asphalt, 7501 x 150 ft Primary ILS ID = ICLT *** No matching ILS record - assume provided by another layer Secondary ILS ID = IAPU *** No matching ILS record - assume provided by another layer *** Runway *** KCLT0050 Lat 35.208950 Long -80.949966 Alt 748 Hdg 55 Len 7501 Wid 150 *** Runway *** KCLT0230 Lat 35.222607 Long -80.931137 Alt 748 Hdg 235 Len 7501 Wid 150 COM: Type=8 (APPROACH), Freq=120.05, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=120.50, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=124.00, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=128.32, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=134.75, Name="CHARLOTTE" COM: Type=1 (ATIS), Freq=121.15, Name="KCLT" COM: Type=1 (ATIS), Freq=132.10, Name="KCLT" COM: Type=7 (CLEARANCE), Freq=127.15, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=120.05, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=120.50, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=124.00, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=128.32, Name="CHARLOTTE" COM: Type=9 (DEPARTURE), Freq=134.75, Name="CHARLOTTE" COM: Type=11 (FSS), Freq=122.40, Name="RALEIGH" COM: Type=5 (GROUND), Freq=121.80, Name="CHARLOTTE" COM: Type=5 (GROUND), Freq=121.90, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=125.35, Name="CHARLOTTE" COM: Type=8 (APPROACH), Freq=126.15, Name="CHARLOTTE" COM: Type=6 (TOWER), Freq=118.10, Name="CHARLOTTE" COM: Type=6 (TOWER), Freq=126.40, Name="CHARLOTTE" COM: Type=3 (UNICOM), Freq=122.95, Name="CHARLOTTE/DOUGLAS INTL"------------------------------------ These sections were not adjacent but in order. Here is the default PAFA in part: Airport PAFA :N64:48:49.2394 W147:51:34.8102 434ft Country Name="United States" State Name="Alaska" City Name="Fairbanks" Airport Name="Fairbanks Intl" in file: Scenery\NAMW\scenery\AP908080.BGL Runway 1L/19R centre: N64:48:55.1999 W147:51:45.2097 434ft Start 1L: N64:48:10.7873 W147:53:06.9057 434ft Hdg: 38.1T, Length 11768ft Computed start 1L: Lat 64.802628 Long -147.885951 Offset Threshold primary: 750 feet Start 19R: N64:49:39.5802 W147:50:23.5125 434ft Hdg: 218.1T, Length 11768ft Computed start 19R: Lat 64.828033 Long -147.839177 Offset Threshold secondary: 750 feet Hdg: 38.070 true (MagVar 26.000), Asphalt, 11768 x 150 ft Primary ILS ID = ICNA Primary ILS: ICNA 109.10 Hdg: 38.1 , Flags: GS DME BC "CAT III ILS/DME 01L" Secondary ILS ID = IFAI Secondary ILS: IFAI 110.30 Hdg: 218.1 , Flags: GS BC "ILS 19R" *** Runway *** PAFA0011 Lat 64.802628 Long -147.885956 Alt 434 Hdg 12 Len 11768 Wid 150 ILS 109.10, Flags: GS DME BC *** Runway *** PAFA0192 Lat 64.828033 Long -147.839172 Alt 434 Hdg 192 Len 11768 Wid 150 ILS 110.30, Flags: GS BC Runway 1R/19L centre: N64:49:04.9182 W147:50:33.0864 434ft Start 1R: N64:48:55.9774 W147:50:49.5271 434ft Hdg: 38.1T, Length 2631ft Computed start 1R: Lat 64.815193 Long -147.847759 Start 19L: N64:49:13.8267 W147:50:16.6471 434ft Hdg: 218.1T, Length 2631ft Computed start 19L: Lat 64.820869 Long -147.837300 Hdg: 38.070 true (MagVar 26.000), Asphalt, 2631 x 60 ft *** Runway *** PAFA0012 Lat 64.815193 Long -147.847763 Alt 434 Hdg 12 Len 2631 Wid 60 *** Runway *** PAFA0191 Lat 64.820869 Long -147.837296 Alt 434 Hdg 192 Len 2631 Wid 60 Runway 1W/19W centre: N64:49:17.6492 W147:50:40.9430 434ft Hdg: 36.000 true (MagVar 26.000), Water, 5400 x 200 ft COM: Type=8 (APPROACH), Freq=118.60, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=125.35, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=126.50, Name="FAIRBANKS" COM: Type=1 (ATIS), Freq=124.40, Name="PAFA" COM: Type=7 (CLEARANCE), Freq=127.60, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=125.30, Name="EIELSON RANGE" COM: Type=9 (DEPARTURE), Freq=125.35, Name="FAIRBANKS" COM: Type=9 (DEPARTURE), Freq=126.50, Name="FAIRBANKS" COM: Type=11 (FSS), Freq=122.20, Name="FAIRBANKS" COM: Type=11 (FSS), Freq=122.45, Name="FAIRBANKS" COM: Type=11 (FSS), Freq=122.60, Name="FAIRBANKS" COM: Type=5 (GROUND), Freq=121.90, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=118.10, Name="FAIRBANKS APPROACH" ------------------------- The deletion section for an add-on PAFA: ..\..\..\AFCAD2S\scenery\PAFA_ADE9_REG.BGL=============================================================================Deletions check for Airport PAFA: Delete all taxiways! Delete all runways and starts! *** DelBth *** PAFA0011 Lat 64.802628 Long -147.885956 Alt 434 Hdg 12 Len 11768 Wid 150 ILS 109.10, Flags: GS DME BC *** DelBth *** PAFA0012 Lat 64.815193 Long -147.847763 Alt 434 Hdg 12 Len 2631 Wid 60 *** DelBth *** PAFA0191 Lat 64.820869 Long -147.837296 Alt 434 Hdg 192 Len 2631 Wid 60 *** DelBth *** PAFA0192 Lat 64.828033 Long -147.839172 Alt 434 Hdg 192 Len 11768 Wid 150 ILS 110.30, Flags: GS BC Delete all taxiways! COM: Delete all frequencies!=============================================================================..\..\..\AFCAD2S\scenery\UDYZ_ADE9_RG.BGL=============================================================================Deletions check for Airport UDYZ: Delete all taxiways! Delete all runways and starts! Delete all taxiways! COM: Delete all frequencies!=============================================================================..\..\..\AFCAD2S\scenery\zAF2_DAAG.bgl=============================================================================Deletions check for Airport DAAG: Delete all taxiways! Delete all runways and starts! *** DelBth *** DAAG0050 Lat 36.694275 Long 3.220589 Alt 82 Hdg 54 Len 11495 Wid 197 *** DelBth *** DAAG0090 Lat 36.691628 Long 3.170750 Alt 82 Hdg 92 Len 11469 Wid 148 ILS 108.50, Flags: GS BC *** DelBth *** DAAG0230 Lat 36.713257 Long 3.251994 Alt 82 Hdg 234 Len 11495 Wid 197 ILS 110.30, Flags: GS BC *** DelBth *** DAAG0270 Lat 36.691086 Long 3.209977 Alt 82 Hdg 272 Len 11469 Wid 148 Delete all taxiways! COM: Delete all frequencies!============================================================================= And in part the scenery elements for a PAFA add-on I modified in ADE: ..\..\..\AFCAD2S\scenery\PAFA_ADE9_REG.BGL=============================================================================Airport PAFA :N64:48:49.2394 W147:51:34.8102 434ft Country Name="United States" State Name="Alaska" City Name="Fairbanks" Airport Name="Fairbanks Intl" in file: ..\..\..\AFCAD2S\scenery\PAFA_ADE9_REG.BGL Runway 1L/19R centre: N64:48:55.1999 W147:51:45.2097 434ft Start 1L: N64:48:10.7873 W147:53:06.9057 434ft Hdg: 38.1T, Length 11768ft Computed start 1L: Lat 64.802628 Long -147.885951 Offset Threshold primary: 750 feet Start 19R: N64:49:39.5802 W147:50:23.5125 434ft Hdg: 218.1T, Length 11768ft Computed start 19R: Lat 64.828033 Long -147.839177 Offset Threshold secondary: 750 feet Hdg: 38.070 true (MagVar 26.000), Asphalt, 11768 x 150 ft Primary ILS ID = ICNA Primary ILS: ICNA 109.10 Hdg: 38.1 , Flags: GS DME BC "ILS/DME 01L" Secondary ILS ID = IFAI Secondary ILS: IFAI 110.30 Hdg: 218.1 , Flags: GS BC "ILS 19R" *** Runway *** PAFA0011 Lat 64.802628 Long -147.885956 Alt 434 Hdg 12 Len 11768 Wid 150 ILS 109.10, Flags: GS DME BC *** Runway *** PAFA0192 Lat 64.828033 Long -147.839172 Alt 434 Hdg 192 Len 11768 Wid 150 ILS 110.30, Flags: GS BC Runway 1 /19 centre: N64:49:06.1492 W147:50:33.5643 434ft Start 1 : N64:48:53.2239 W147:50:57.2727 434ft Hdg: 38.1T, Length 3500ft Computed start 1 : Lat 64.814598 Long -147.849608 Start 19 : N64:49:14.9281 W147:50:17.2135 434ft Hdg: 218.1T, Length 3500ft Computed start 19 : Lat 64.822151 Long -147.835695 Hdg: 38.070 true (MagVar 26.000), Gravel, 3500 x 75 ft *** Runway *** PAFA0010 Lat 64.814598 Long -147.849609 Alt 434 Hdg 12 Len 3500 Wid 75 *** Runway *** PAFA0190 Lat 64.822151 Long -147.835693 Alt 434 Hdg 192 Len 3500 Wid 75 Runway 1W/19W centre: N64:49:17.2929 W147:50:40.9430 434ft Hdg: 38.070 true (MagVar 26.000), Water, 5400 x 200 ft Runway 1R/19L centre: N64:48:27.3408 W147:51:45.0039 434ft Start 1R: N64:48:02.8183 W147:52:29.9152 434ft Hdg: 38.7T, Length 6500ft Computed start 1R: Lat 64.800575 Long -147.875417 Start 19L: N64:48:46.7450 W147:51:09.2944 434ft Hdg: 216.3T, Length 6500ft Computed start 19L: Lat 64.814613 Long -147.849589 Offset Threshold secondary: 200 feet Hdg: 38.070 true (MagVar 26.000), Asphalt, 6500 x 100 ft *** Runway *** PAFA0012 Lat 64.800575 Long -147.875412 Alt 434 Hdg 12 Len 6500 Wid 100 *** Runway *** PAFA0191 Lat 64.814613 Long -147.849594 Alt 434 Hdg 192 Len 6500 Wid 100 COM: Type=8 (APPROACH), Freq=118.60, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=125.35, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=126.50, Name="FAIRBANKS" COM: Type=1 (ATIS), Freq=124.40, Name="PAFA" COM: Type=7 (CLEARANCE), Freq=127.60, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=125.30, Name="EIELSON RANGE" COM: Type=9 (DEPARTURE), Freq=125.35, Name="FAIRBANKS" COM: Type=9 (DEPARTURE), Freq=126.50, Name="FAIRBANKS" COM: Type=11 (FSS), Freq=122.20, Name="FAIRBANKS" COM: Type=11 (FSS), Freq=122.45, Name="FAIRBANKS" COM: Type=11 (FSS), Freq=122.60, Name="FAIRBANKS" COM: Type=5 (GROUND), Freq=121.90, Name="FAIRBANKS" COM: Type=8 (APPROACH), Freq=118.10, Name="FAIRBANKS APPROACH" COM: Type=6 (TOWER), Freq=118.30, Name="FAIRBANKS" COM: Type=3 (UNICOM), Freq=122.95, Name="FAIRBANKS INTL" Taxipoint #0, type 2 (Hold Short): N64:49:41.2323 W147:50:25.5369 -- Forward Taxipoint #1, type 1 (normal): N64:49:23.7393 W147:50:13.0726 -- Forward ----------------------- Check out yours to see if these sections are proper for your version of FS. The latest makerwys.exe is at: http://forum.simflight.com/topic/66136-useful-additional-programs/ Let me know if this helps. Remember RC copies r5.csv, not r4.csv to its data folder renaming r5.csv to r4.csv.
May 31, 201610 yr Author I have the latest MakeRwys.EXE Version 4.697, by Pete Dowson. If the file is corrupted then how do I fix the problem? The information you gave me did not totally make sense in terms of what I need to do next if I have the latest MakeRwys.exe file. Should not this file have all of the runways for each airport? I appreciate your help and am trying to work through this. I found the file you were referring to and here is the beginning of PAFA: Airport PAFA :N64:48:54.3901 W147:51:22.5601 434ft Country Name="United States" State Name="Alaska" City Name="Fairbanks" Airport Name="Fairbanks Intl" in file: Scenery\0101\scenery\APX08080.bgl Runway 1 /19 centre: N64:49:06.6999 W147:50:31.2547 434ft Start 1 : N64:48:53.5478 W147:50:55.3883 434ft Hdg: 38.1T, Length 3492ft Computed start 1 : Lat 64.814758 Long -147.848954 Start 19 : N64:49:19.8196 W147:50:07.1197 434ft Hdg: 218.1T, Length 3492ft Computed start 19 : Lat 64.822296 Long -147.835067 Hdg: 38.090 true (MagVar 26.000), Gravel, 3492 x 75 ft *** Runway *** PAFA0010 Lat 64.814758 Long -147.848953 Alt 434 Hdg 12 Len 3492 Wid 75 *** Runway *** PAFA0190 Lat 64.822296 Long -147.835068 Alt 434 Hdg 192 Len 3492 Wid 75 Runway 1L/19R centre: N64:48:55.1999 W147:51:45.2145 434ft Start 1L: N64:48:10.9493 W147:53:06.5080 434ft Hdg: 38.1T, Length 11769ft Computed start 1L: Lat 64.802620 Long -147.885953 Offset Threshold primary: 750 feet Start 19R: N64:49:39.4182 W147:50:23.9229 434ft Hdg: 218.1T, Here is my KCLT beginning portion: Airport KCLT :N35:12:50.4200 W080:56:35.2502 748ft Country Name="United States" State Name="North Carolina" City Name="Charlotte" Airport Name="Charlotte-Douglas Intl" in file: Scenery\0302\scenery\APX26190.bgl Runway 18R/36L centre: N35:12:49.2862 W080:57:07.1794 748ft Start 18R: N35:13:37.0030 W080:57:11.2766 748ft Hdg: 176.0T, Length 10016ft Computed start 18R: Lat 35.227394 Long -80.953175 Start 36L: N35:12:01.6017 W080:57:03.0820 748ft Hdg: 356.0T, Length 10016ft Computed start 36L: Lat 35.199989 Long -80.950817 Hdg: 175.980 true (MagVar -7.000), Concrete, 10016 x 150 ft Primary ILS ID = IPEP Primary ILS: IPEP 111.30 Hdg: 176.0 , Flags: GS BC "ILS 18R" Secondary ILS ID = IDQG Secondary ILS: IDQG 111.70 Hdg: 356.0 , Flags: GS BC "CAT III ILS 36L" *** Runway *** KCLT0182 Lat 35.227394 Long -80.953171 Alt 748 Hdg 183 Len 10016 Wid 150 ILS 111.30, Flags: GS BC *** Runway *** KCLT0361 Lat 35.199989 Long -80.950821 Alt 748 Hdg 3 Len 10016 Wid 150 ILS 111.70, Flags: GS BC Runway 18L/36R centre: N35:12:46.2087 W080:56:06.5093 748ft Start 18L: N35:13:27.6086 W080:56:10.0626 748ft Hdg: 176.0T, Thanks Don Don Lillard
May 31, 201610 yr Everything appears detected. Now reply with the several lines from r5.csv in your fs folder and the same lines from r4.csv in your rcv4/data folder. Again, use just wordpad, not Excel, to open those files. Search first for KCLT then PAFA. For FSX here are my lines (extracts) which are all default from the Steam Edition: From r5.csv in the fsx folder KCLT,0050,35.208950,-80.949966,748,55.400,7501,110.95BG,150,-7.000,35.215778,-80.940552,0,,KCLT,0181,35.224720,-80.936165,748,182.980,8686,110.35BG,150,-7.000,35.212837,-80.935143,0,,KCLT,0182,35.227394,-80.953171,748,182.980,10016,111.30BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0230,35.222607,-80.931137,748,235.400,7501,109.50BDG,150,-7.000,35.215778,-80.940552,0,,KCLT,0361,35.199989,-80.950821,748,2.980,10016,111.70BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0362,35.200954,-80.934120,748,2.980,8686,108.90BDG,150,-7.000,35.212837,-80.935143,0,, PAFA,0010,64.814758,-147.848953,434,12.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0011,64.802620,-147.885956,434,12.070,11769,109.10BDG,150,26.000,64.815331,-147.862564,750,,PAFA,0012,64.800224,-147.875687,434,12.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0190,64.822296,-147.835068,434,192.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0191,64.814217,-147.849930,434,192.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0192,64.828041,-147.839172,434,192.070,11769,110.30BG,150,26.000,64.815331,-147.862564,750,, and from r4.csv in the rcv4/data folder: KCLT,0050,35.208950,-80.949966,748,55.400,7501,110.95BG,150,-7.000,35.215778,-80.940552,0,,KCLT,0181,35.224720,-80.936165,748,182.980,8686,110.35BG,150,-7.000,35.212837,-80.935143,0,,KCLT,0182,35.227394,-80.953171,748,182.980,10016,111.30BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0230,35.222607,-80.931137,748,235.400,7501,109.50BDG,150,-7.000,35.215778,-80.940552,0,,KCLT,0361,35.199989,-80.950821,748,2.980,10016,111.70BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0362,35.200954,-80.934120,748,2.980,8686,108.90BDG,150,-7.000,35.212837,-80.935143,0,, PAFA,0010,64.814758,-147.848953,434,12.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0011,64.802620,-147.885956,434,12.070,11769,109.10BDG,150,26.000,64.815331,-147.862564,750,,PAFA,0012,64.800224,-147.875687,434,12.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0190,64.822296,-147.835068,434,192.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0191,64.814217,-147.849930,434,192.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0192,64.828041,-147.839172,434,192.070,11769,110.30BG,150,26.000,64.815331,-147.862564,750,, Notice the two sources match. Here's how to decode the runway numbers in the second field. There are four numbers: Rwy is nnn for runway number, then 0, 1=L, 2=R, 3=C, 4=W (water) Note that runways designated N, NE, etc are denoted by runway numbers over 36, as follows: 37 = N-S 38 = E-W 39 = NW-SE 40 = SW-NE 41 = S-N 42 = W-E 43 = SE-NW 44 = NE-SW 45 = N 46 = W 47 = NW 48 = SW 49 = S 50 = E 51 = SE 52 = NE so PAFA,0192, 0 is nothing here, 19 is the runway number, and 2 is the right symbol so this is runway 19R. For RC runways 1500 feet or shorter are excluded from data to avoid a conflict with "psuedo runways" used in a technique to make non-parallel runways available to be simultaneously active so the PAFA water runway is not shown.
May 31, 201610 yr Author From r5.csv in the fsx folder: KCLT,0050,35.208950,-80.949966,748,55.400,7501,110.95BG,150,-7.000,35.215778,-80.940552,0,,KCLT,0181,35.224720,-80.936165,748,182.980,8686,110.35BG,150,-7.000,35.212837,-80.935143,0,,KCLT,0182,35.227394,-80.953171,748,182.980,10016,111.30BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0230,35.222607,-80.931137,748,235.400,7501,109.50BDG,150,-7.000,35.215778,-80.940552,0,,KCLT,0361,35.199989,-80.950821,748,2.980,10016,111.70BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0362,35.200954,-80.934120,748,2.980,8686,108.90BDG,150,-7.000,35.212837,-80.935143,0,, PAFA,0010,64.814758,-147.848953,434,12.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0011,64.802620,-147.885956,434,12.070,11769,109.10BDG,150,26.000,64.815331,-147.862564,0,,PAFA,0012,64.800224,-147.875687,434,12.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0190,64.822296,-147.835068,434,192.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0191,64.814217,-147.849930,434,192.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0192,64.828041,-147.839172,434,192.070,11769,110.30BG,150,26.000,64.815331,-147.862564,750,, and from r4.csv in the rcv4/data folder: KCLT,0050,35.208950,-80.949966,748,55.400,7501,110.95BG,150,-7.000,35.215778,-80.940552,0,,KCLT,0181,35.224720,-80.936165,748,182.980,8686,110.35BG,150,-7.000,35.212837,-80.935143,0,,KCLT,0182,35.227394,-80.953171,748,182.980,10016,111.30BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0230,35.222607,-80.931137,748,235.400,7501,109.50BDG,150,-7.000,35.215778,-80.940552,0,,KCLT,0361,35.199989,-80.950821,748,2.980,10016,111.70BG,150,-7.000,35.213692,-80.951996,0,,KCLT,0362,35.200954,-80.934120,748,2.980,8686,108.90BDG,150,-7.000,35.212837,-80.935143,0,, PAFA,0010,64.814758,-147.848953,434,12.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0011,64.802620,-147.885956,434,12.070,11769,109.10BDG,150,26.000,64.815331,-147.862564,0,,PAFA,0012,64.800224,-147.875687,434,12.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0190,64.822296,-147.835068,434,192.090,3492,0,75,26.000,64.818527,-147.842010,0,,PAFA,0191,64.814217,-147.849930,434,192.070,6480,0,100,26.000,64.807220,-147.862808,0,,PAFA,0192,64.828041,-147.839172,434,192.070,11769,110.30BG,150,26.000,64.815331,-147.862564,750,, The actual runways at PAFA are 2/20 so isn`t those runway numbers incorrect? Should it not read PAFA 0202 for the last entry for runway 20 ? The actual runways at KCLT include a center runway. Would that not mean there should be a KCLT, 0363 entry added as opposed to just two entries? KCLT,0362,35.200954,-80.934120,748,2.980,8686,108.90BDG,150,-7.000,35.212837,-80.935143,0,, Thanks Don Don Lillard
May 31, 201610 yr opening the default kclt in Airport Design Editor here is the runway list: ID,Heading,Length Feet,Width Feet,Surface,Cross Wind,Comments18R/36L,176.0,10016.0,150.0,CONCRETE,No,18L/36R,176.0,8686.0,150.0,ASPHALT,No,05/23,048.4,7501.0,150.0,ASPHALT,No, Your runway designator changes at PAFA are caused by the real airport magnetic deviation changing and the magnetic heading changes requiring new designators. Make runways pulls the data from your installed scenery to insure data matches what you see (and taxi over, etc) in FS, not real world. Your solution would be to search for free or payware add-on scenery of recent design and install followed by running the scenery rebuild again. Designators and magnetic deviation can be changed using ADE which will then build a new airport scenery. I'll check later today to see what might be in the libraries already designed.
May 31, 201610 yr Here is a freeware kclt airport updated this last January on flightsim.com. It has all four runways and should have updated designators: Name: charlotte-douglas_kclt_fsx.zipSize: 1,613,447 Date: 01-12-2016 Downloads: 2,300 I assume you are using FSX. If not, i look up FS9 versions. Edit: On flightsim.com, here is an updated PAFA: Name: akfs_pafa2011.zipSize: 409,210 Date: 03-20-2011 Downloads: 1,980 The description states the runways and navaids are updated. You install the scenery, restart FSX so it reindexes its scenery library, then close FSX, Start RC, and run the scenery rebuild. More later.
June 1, 201610 yr Author My only fear in doing this is that I have only ORBX scenery installed and I know some of the airport addons cause problems with ORBX. Thanks Don Don Lillard
June 1, 201610 yr You can always in the scenery library settings disable the entries. The only scenery caution not affected by this are some specific projects that modify ABxxxxxxand APxxxxxx scenery files which are shared (each one covers a geographic "tile" area) that can mess up other scenery depending on those. One such project is the Hellenic Greek Airports one. The are some things that can not be edited with exclusions and overlays so the developers modify the defaults.
Create an account or sign in to comment