Hi all,Here is a message from John Dekker concerning RC3.01 and ActiveSky wxRE's latest integration features..-DamianRC3.01 Beta availabledownload it from here www.jdtllc.com/v3/rcv301.zipthis is a beta release (but no bad reports as of yet).there are a number of things it improves on1) air carriers are not called at little airports during synthetic chatter2) altimeter is not called every 30 seconds, because an external weather program is smoothing the transition3) support for active sky arrival weather4) THERE IS NO GROUND AWARENESS IN THIS BUILD5) fs98 wind direction, speed and visibility are now correct6) remembers the last transition altitudes/FL's between sessions, even when sucking in a new .pln file7) proper handling of atis frequencies for flitestar8) better processing of wav playing.before i officially release it, i'll wait til peter dowson releases the new advdisp that he is working ontwo things to do with this build!you must set your transitions altitudes on the first flight you run, after installing this build. they will be set to 0if you are using a batch file to adjust the priorities, you can forget all that. now a simple shortcut will do. to increase the priority to high, the command line for the shortcut will be"c:whateverpathrcv3rcv3.exe" /highfor realtime, it will be"c:whateverpathrcv3rcv3.exe" /realtimefor low, it will be"c:whateverpathrcv3rcv3.exe" /lowplease let me know how the /realtime, /high, /low command line flags work.also let me know if you find any problems. report them here [in the Radar Contact forum here at AVSIM][table border=0" cellspacing="30" cellpadding="0][tr][td align = "left"]Damian ClarkHiFi Simulation SoftwareDeveloper of ActiveSkyThe next-generation weather environment simulation for FS2002!http://hifi.avsim.net/activesky[/td][td]http://hifi.avsim.net/activesky/images/wxrebeta.jpg][/td][/tr][/table://http://hifi.avsim.net/activesky/ima...][/tr][/table

will you contact me via email. i'd like to send you the latest and greatest.i've added a feature to 3.01 that allows you to set priority from the commandline, instead of having to fool with all those silly batch files.but i need your help, in verifying that it works as good as the batch files.if you would put "request 3.01 update" in your subject line, i'd appreciate it.thanksjd