Hello thereI'm having problems getting the correct post type IV de-icing rotation calls to play. I go through all the procedures as outlined in the manual but when I come to press the second button for the Pull command I get the call to STOP.There seems to be no way for me to get the Pull command and subsequent 5-degree pitch check.Could the procedures and button presses be checked, as I'm sure I'm following the steps outlined in the manual.Cheers, Tom (EGCV)

Hello Tom,You must call "Rotate" before hitting the secondary button to call "Pull!!!"Calling "Rotate" is a necessary pre-condition.Another necessary condition is that the ATR be configured for Level II anti-ice. If icing conditions exit or are anticipated to exist below the acceleration altitude, the FO should configure the a/c for Level II anti-ice when you start Engine 1 as per his flow.As you've discovered, if you click the secondary button "prior" to calling "Rotate", you will call "Stop".Hope that helps,Bryan