Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

MD-11 Brake Problem - FSX

Featured Replies

There seems to be some sort of brake bug going on. Sometimes my brakes do not respond at all, meaning, I press the period key and nothing happens. I know FS is receiving the key press because I can release the parking brakes by pressing the period key. I have found that I need to mess with the auto brake system to get my brakes back. I'll bring the aircraft to a complete stop using the parkin brakes. Then I'll cycle the auto brake system between ROT and OFF. This seems to restore my normal brakes.I searched the forum briefly and found that others are having various other issues with brakes too, such as the brakes not releasing. My issue is just that the brakes sometimes do not activate.EDIT: By the way, I am using the following addons and VISTA 64xUTX, GEX, Registered FSUIPC, REX, and only the PMDG MD-11 is installed. This is also a fresh install of VISTA and FSX, I wiped out my HDD yesterday and reinstalled all of this.Mike Brown

Mike Brown

Whats your brake setting at? Is it maxed out?

  • Commercial Member

Last night I had the auto braking system fail to disconnect on pressing the brakes. It brought the aircraft to a complete stop, and I had to cycle the switch from MED to TO then OFF to release them.Spoilers on that landing were NOT armed, and thus not deployed after touchdown.Best regards,Robin.

  • Author

After start up I typically lower the flaps and start my taxi...that is when I discover I have no brakes. So, I need to stop the plane via the parking brakes then I cycle the auto brake system from OFF to LOW then back to off. This restores my brakes.

Mike Brown

  • Author

Never mind....this isn't a PMDG problem. I installed and loaded up another one of my Payware aircraft and I am having the same issue. I reinstalled FSUIPC and going to try again. I'll report back here if that seems to have fixed the problem.

Mike Brown

  • Author

I don't know what is going on now ... deleted the FSUIPC.INI file so FSUIPC would have to rebuild it yet I continue to experience this brake problem.

Mike Brown

  • Commercial Member

I'm not running FSUIPC as far as I'm aware.I don't usually have a problem. I put it down to landing without arming the spoilers (intentional).Manually braking should have dis-engaged the auto-brakes (which it does usually, but not this time).Best regards,Robin.

I'm not running FSUIPC as far as I'm aware.I don't usually have a problem. I put it down to landing without arming the spoilers (intentional).Manually braking should have dis-engaged the auto-brakes (which it does usually, but not this time).Best regards,Robin.
Robin,The first question should be:Why are the Autobrakes engaged, if the spoilers are not armed/deployed on touchdown.Problems to disengage the auto-brakes are secondary to that.I've never landed without the spoilers being armed (green box), even during touch and go's, so have to do that some time to see what's happening then in this simulation.Regards,Harry
Robin,The first question should be:Why are the Autobrakes engaged, if the spoilers are not armed/deployed on touchdown.Problems to disengage the auto-brakes are secondary to that.I've never landed without the spoilers being armed (green box), even during touch and go's, so have to do that some time to see what's happening then in this simulation.Regards,Harry
Just made the test:Autobrakes MED selected, Spoilers NOT armed for landing.As expected the Autobrakes did NOT engage upon landing, as is per aircraft.Regards,Harry

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.