PMDG 747 problems

[Guest Bugmenot123]

Hi guys! My aircraft 747 got these problems!- The autopilot control the flight quite well until the t/d. It keep descending good, but didn't reduce the throttle. I did switch a/t but it seems not to be activated coz the speed didn't stop at the mark.- The FMC always show 'Route discontinuity' although I put all the waypoint into that. - I've read through the tutorial on smithplanet.com to start up the 747 but I couldn't turn the ELEC ENG COTROL switches to norm after turning on the battery and stanby power (I've downloaded the cold and dark panel state provided as well). So I always use the way on YouTube. Is that problem on my aircraft?

[out 769]

Hello, Bugmenot123!http://forum.avsim.net/forum/352-pmdg-747-400/ - this is a perfect place to get answers to these questions.

[cbrown 1]

You need to close the discontinuity. Move the waypoint below the discontinuity up into the gap so that the warning goes.Then, when autolanding, make sure you have at least 2 autopilots in command, preferably, all 3.Colin B

[Guest Bugmenot123]

You need to close the discontinuity. Move the waypoint below the discontinuity up into the gap so that the warning goes.Then, when autolanding, make sure you have at least 2 autopilots in command, preferably, all 3.Colin B

Thanks for that, i'll try those ways and reply asap.