Hi All,I just downloaded the awesome Grumman Goose by Bill Lyon. It's a great plane, but I have pretty interesting issue.I can begin a landing on water, however as I slow down and become stationary, the Goose will shoot straight up (about 100 feet) and then nose over and just keep boucing up and down. Starting the aircraft on a water airport will do the same.I had crash detection off, turned it on. Same thing, except it crashes right away on the water. I had the flight realism settings all the way right, I moved the Crash Tolerance back to the left 'Easy'. No difference.I tried the default Cessna Caravan amphibian, and that behaviour does not appear at all, whether take-off, stationary on the water, or landing.Anyone have some input? Contact points maybe? How would I edit those?Thanks

Can you post the [contact points] section of the aircraft.cfg?I don't have it on this computer, so...regards,Joe

Can you post the [contact points] section of the aircraft.cfg?

Sure can....

[contact_points]point.0 =1, -16.80,  0.00, -1.80, 3200, 0, 0.70,70.0, 0.30, 2.5, 0.90, 4.5, 4.5, 0, 0, 190point.1 =1,   1.40, -3.91, -3.90, 2200, 1, 1.40,  0.0, 0.50, 2.5, 0.85, 0.0, 0.0, 2, 0, 0point.2 =1,   1.40,  3.91, -3.90, 2200, 2, 1.40,  0.0, 0.50, 2.5, 0.85, 5.5, 5.5, 3, 0, 190point.3 = 4,  4.00, -1.50, -1.410, 36000, 0, 0.00, 47.0, 0.85, 40.5, 1.25, 0.0, 0.0, 0, 0.0, 0.0point.4 = 4, 4.00,  1.50, -1.410, 36000, 0, 0.00,  47.0, 0.85, 40.5, 1.25, 0.0, 0.0, 0, 0.0, 0.0point.5 = 4, -4.35, -1.250, -1.310, 36000, 0, 0.00,  0.0, 0.85, 40.5, 3.25, 0.0, 0.0, 0, 0.0, 0.0point.6 = 4, -4.35,  1.250, -1.310, 36000, 0, 0.00,  0.0, 0.85, 40.5, 3.25, 0.0, 0.0, 0, 0.0, 0.0point.7 = 2, -3.35, -16.250, 0.200, 136000, 0, 0.00,  0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0, 0.0, 0.0point.8 = 2, -3.35,  16.250, 0.200, 136000, 0, 0.00,  0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0, 0.0, 0.0point.9 =  5, 0.90, 0.0, 7.300, 1600, 0, 0.00, 50.0, 2.0,  2.0, 2.00, 2.0, 2.0, 2.0,2.0, 2.0point.10 = 4, -14.35, 0.0, 0.20, 136000,1, 1.40,  0.0, 0.50, 5.5, 0.85, 0.0, 0.0, 0, 0, 0static_cg_height = 3.20 //(feet) altitude of CG when at rest (altitude when loaded on ground)static_pitch	 = 6.50 //degrees (pitch when loaded on ground)gear_system_type=0

Change this one line as highlighted...point.9 = 5, 0.90, 0.0, 7.300, 13600, 0, 0.00, 50.0, 2.0, 2.0, 2.00, 2.0, 2.0, 2.0,2.0, 2.0Let us know if that helps.regards,Joe

Thank Joe,I'll give that try this evening. I just obtained a Goose on FSEconomy and want to make sure it behaves well.