December 30, 201213 yr Well, it appears that EZDok has completely stopped working. I was having issues with one aircraft (the Airbus X Extended, which has its own view system that messes with EZDok), so I reinstalled, and ever since, it hasn't worked at all. The program still opens with FSX, but I can't change views by any means except the view menu in FSX. Basically, I'm stuck in the default VC view for each aircraft, and when I switch to the external EZDok view by going to the FSX view menu and selecting "EZDok Universal Camera", the camera is positioned, immobile, in the middle of the aircraft. Neither the hat switch nor any other shortcut buttons on my joystick work. Just about the only thing left functional is the dinging noise when you edit the camera by pressing Num2. I've uninstalled and reinstalled in just about every possible combination to no avail. EZDok just doesn't work. Any ideas? -Bram Osterhout
December 30, 201213 yr If you installed it using the unpacked installer rather than by re-installing from the Flight1 wrapper, then it's possible the F1 key file isn't there. I had a friend experience a similar problem, and it was because he was using a backup of his unpacked installer rather than running the F1 wrapper and selecting the re-install option. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
December 30, 201213 yr Author Without guessing anything else, did you run the EZCA Config.exe before running FSX?! Yeah, I did. Sorry--should have mentioned that. If you installed it using the unpacked installer rather than by re-installing from the Flight1 wrapper, then it's possible the F1 key file isn't there. I had a friend experience a similar problem, and it was because he was using a backup of his unpacked installer rather than running the F1 wrapper and selecting the re-install option. Regards I have been using the unpacked one. I'll try the original installer now... Edit: Okay, that worked perfectly... wow. I should have thought of that much earlier... However, since I removed the old EZDok installation, I seem to have an older version now (for example, it doesn't have the yellow "Cycle" buttons). Do you happen to know where I might find the update/patch? -Bram Osterhout
December 30, 201213 yr Okay, that worked perfectly... wow. I should have thought of that much earlier... However, since I removed the old EZDok installation, I seem to have an older version now (for example, it doesn't have the yellow "Cycle" buttons). Do you happen to know where I might find the update/patch? The current version at Flight1 is 1.15, and there's a 1.16 update on the EZ-DOK site: http://www.ezdok-software.com/4.html Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
December 30, 201213 yr it's currently at 1.17. I've removed mine for OpusFSX instead. Windows 10 (x64) - X-Plane 11 - M/B: Asus ROG Maximus IX Hero - CPU: i7 7700k (@5.0GHz) - RAM: 32Gb Corsair Vengeance LPX DDR4 @ 3200MHz - Video: GTX1080ti - Cooling: Custom water loop (EK 140 Revo D5 pump/res combo, EK EVO CPU block, EK XE360 Rad)
December 30, 201213 yr it's currently at 1.17. I've removed mine for OpusFSX instead. Yes it is. Here's the link...kinda sloppy on their part not having a 2+ year old update linked on their own web site. http://www.ezdok-software.com/resources/files/EZCA-Update-1.17.zip Cheers Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
Create an account or sign in to comment