September 26, 201411 yr Bonjour, I am learning.... :smile: So I certainly did something wrong. As I noticed that after a certain altitude, (lower atmosphere I suppose) I do not have any wind information (PMDG 737NGX), I suspected something wrong with the grib decoder. I found in C:\FSIDECODER.log.... I am not sure if it is the good log as it is not mentioned in the doc. OpusFSI GRIB Data Decoder, Version 4.01 Log generated 26 september 2014, 15:26 Hrs 1 Errors Detected Invalid Operation FYI: The dot is configured as decimal separator in window. Any idea ? Best regards Claude Claude Troncy
September 26, 201411 yr Commercial Member The 'Invalid Operatiin' error means your FSIDECODER.exe program is not compatible with the version of your FSISERVER.exe program, so please check your installation in your c:\OpusFSI folder. You could check and post the contents of your c:\OpusFSI\FSISERVER.log file which will show any obvious discrepancies. Stephen :-)
September 26, 201411 yr Author Strange... as I installed the package with the official installer "OpusFSI_Flight1_Purchase.exe" Anyway I do not see anything wrong in the server log... -------------------------------------------------------------------------------------------------- OpusFSI Flight Simulator Interface Log Generated 26 September 2014, 15:26 Hrs Installed Folder: C:\OPUSFSI No Errors Detected. Installed Files: OPUSFSI.DLL Version: 4.0.1.0 , 26 September 2014, 15:26 Hrs FSISYSTEM.DLL Version: 4.0.1.0 , 03 September 2014, 11:30 Hrs FSISERVER.EXE Version: 4.0.1.0 , 03 September 2014, 11:30 Hrs FSDECODER.EXE Version: 4.0.1.0 , 03 September 2014, 11:30 Hrs ----------------------------------------------------------------------------------------------------------- Claude Claude Troncy
September 26, 201411 yr Commercial Member Everything looks perfectly fine in that log. Can you double check you are running the FSISERVER program from within its c:\OpusFSI folder and try checking over all your Weather dialogs, enter a Max Cruise Altitude > 6000 feet and generate the weather again. Check with the Spy window open and once again check your c:\OpusFSI\FSIDECODER.log again. Let me know what happens. Stephen :-)
September 26, 201411 yr Author Same .... Max Cruise altitude is 25000 The spy... MET GRIB Forecast Data Still Valid, vendredi 26 septembre 2014, Cycle 12:00 Zulu MET Decoding GRIB Forecast Data ... MET Reading GRIB Forecast ... MET Unable to Extract and Decode GRIB Data After that the metar are downloaded. Claude Claude Troncy
September 26, 201411 yr Commercial Member OK. You should now try deleting the contents of your GRIB folder with exception to the Degrib.exe program, then try again. I will double check all is OK at this end, but there re no reported problems. I assume you got the same Invalid Operation error in the FSIDECODER.log file. Stephen
September 26, 201411 yr Author Yes same invalid Operation I deleted all the csv... The spy ------------------------------------------------------------------------------------- MET Attempting To Download GRIB Forecast for vendredi 26 septembre 2014, Cycle 12:00 Zulu ... MET Turbulence: Strength 1 Frequency 1 MET GRIB Data File Downloaded for vendredi 26 septembre 2014, Cycle 12:00 Zulu MET Extracting GRIB Forecast: Tropopause ... MET Extracting GRIB Forecast: Level 1 ... MET Extracting GRIB Forecast: Level 2 ... MET Extracting GRIB Forecast: Level 3 ... MET Extracting GRIB Forecast: Level 4 ... MET Extracting GRIB Forecast: Level 5 ... MET Extracting GRIB Forecast: Level 6 ... MET Extracting GRIB Forecast: Level 7 ... MET Extracting GRIB Forecast: Level 8 ... MET Decoding GRIB Forecast Data ... MET Reading GRIB Forecast ... MET Unable to Extract and Decode GRIB Data ----------------------------------------------------------------------------------------------------- Sorry another problem which happens sometimes when I end FSX I do not think it is related to the GRIB problem but who knows ! Claude Exception when ending FSISERVER ------------------------------------------------------------------------------------------------------------------- See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.InvalidOperationException: No process is associated with this object. at System.Diagnostics.Process.EnsureState(State state) at System.Diagnostics.Process.EnsureState(State state) at System.Diagnostics.Process.GetProcessHandle(Int32 access, Boolean throwIfExited) at System.Diagnostics.Process.Kill() at ar.a() at d.a(Object A_0, FormClosingEventArgs A_1) at System.Windows.Forms.Form.OnFormClosing(FormClosingEventArgs e) at System.Windows.Forms.Form.WmClose(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727-5400) ---------------------------------------- FSISERVER Assembly Version: 4.0.1.0 Win32 Version: 4.0.1.0 ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727-5400) ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400) ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727-5400) ---------------------------------------- FSISYSTEM Assembly Version: 4.0.1.0 Win32 Version: 4.0.1.0 ---------------------------------------- Microsoft.FlightSimulator.SimConnect Assembly Version: 10.0.61259.0 Win32 Version: 10.0.61637.0 (FSX-Xpack.20070926-1421) ---------------------------------------- msvcm80 Assembly Version: 8.0.50727.6195 Win32 Version: 8.00.50727.6195 ---------------------------------------- SlimDX Assembly Version: 2.0.13.43 Win32 Version: ---------------------------------------- msvcm90 Assembly Version: 9.0.30729.6161 Win32 Version: 9.00.30729.6161 ---------------------------------------- GMap.NET.Core Assembly Version: 1.7.0.0 Win32 Version: 1.7 ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727-5400) ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727-5400) ---------------------------------------- OPUSFSI Assembly Version: 4.0.1.0 Win32 Version: 4.0.1.0 ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. Claude Troncy
September 26, 201411 yr Commercial Member Can you confirm what Licence type you have? Full OpusFSI or OpusFSI Upgrade etc. Stephen
September 26, 201411 yr Commercial Member We may have found your problem so we will produce a new beta and let you know when we have posted it. Cheryl
September 26, 201411 yr Author Merci Cheryl.. In french we says "Je ne veux pas mourir idiot" which I translate by "I do not want to die idiot" So I am interested to know what was the reason, and why just me ! :smile: Regards Claude Claude Troncy
September 26, 201411 yr Commercial Member Hi Claude, Could you please download and install the current OpusFSI Beta software, make sure you uninstall your current OpusFSI using the Windows Uninstall Programs after downloading the new msi file. Please confirm that the problem has been corrected so I can update the release version this weekend. Regards Stephen :-) http://www.opussoftware.co.uk/opusfsi/downloads.htm
September 26, 201411 yr Commercial Member You should not need to install on the client with this version.
September 26, 201411 yr Author The GRIB data are now here, and decoded.... :smile: and present on the client side. Just a small thing: The return to main menu is not displayed in the lower and upper atmosphere report. Thank you for your reactivity.... Impressive ! Best regards Claude Claude Troncy
Create an account or sign in to comment