Jump to content

Archived

This topic is now archived and is closed to further replies.

mr340

OOM for every payware airport.

Recommended Posts

Hi i had a long time with out having an OOM issue . I am currently having OOM for every payware airport. I try disabling the once that i am not flying into an it seems not to work. I am having OOM for even small airport such as TJSJ from latin VFR . I never had an OOM for that airport. I don't know what could be wrong , i am currently running STEVE DX10 FIX latest one. Can anyone please help me.? This my NI setting . The only changes i made was  Force Vsync On an Unlimited FPS in FSX.

 

CaptureINPNG_zps34f88e72.png


CaptureNI2_zpsa76ca56f.png


Mr Leny

CPU I7 8700K @ 5.0GHz , MOBO -Asus Maximus X Hero (WiFi AC),GPU - GTX1080 TI , RAM - CORSAIR Vengeance RGB 16GB DDR4 3600MHz
SSD -Crucial MX500 1TB (P3D Install Only)
OS- Samsung 960 EVO 500GB (Window 10 Pro 64)

 

 

Share this post


Link to post
Share on other sites

Do not see a problem with your graphics driver settings. OOM's are caused when you run out of Virtual Address Space (VAS). The higher your fsx settings, and the higher your overclock, the faster you will run out of VAS. See the AVSIM CTD Guide for suggestions on fixing this problem. It usually happens when flying into a payware airport with a lot of eye-candy, especially if the flight was longer than 2 hours.

 

Best regards,


Jim Young | AVSIM Online! - Simming's Premier Resource!

Member, AVSIM Board of Directors - Serving AVSIM since 2001

Submit News to AVSIM
Important other links: Basic FSX Configuration Guide | AVSIM CTD Guide | AVSIM Prepar3D Guide | Help with AVSIM Site | Signature Rules | Screen Shot Rule | AVSIM Terms of Service (ToS)

I7 8086K  5.0GHz | GTX 1080 TI OC Edition | Dell 34" and 24" Monitors | ASUS Maximus X Hero MB Z370 | Samsung M.2 NVMe 500GB and 1TB | Samsung SSD 500GB x2 | Toshiba HDD 1TB | WDC HDD 1TB | Corsair H115i Pro | 16GB DDR4 3600C17 | Windows 10 

 

Share this post


Link to post
Share on other sites

Thanks JIm, Merry Christmas! I am going to try to disable FTX Vector . WHen i install Vector i had all kinds of problems. I never got an OOM without FTX Vector


Mr Leny

CPU I7 8700K @ 5.0GHz , MOBO -Asus Maximus X Hero (WiFi AC),GPU - GTX1080 TI , RAM - CORSAIR Vengeance RGB 16GB DDR4 3600MHz
SSD -Crucial MX500 1TB (P3D Install Only)
OS- Samsung 960 EVO 500GB (Window 10 Pro 64)

 

 

Share this post


Link to post
Share on other sites

Hi Jim i finally got a report in the event viewer . I just had an OOM an this is what came up. Please help? I don't have that much of payware airport enable an still getting OOM.

 

Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0xe06d7363
Fault offset: 0x0000c42d
Faulting process id: 0x1adc
Faulting application start time: 0x01d021dccd81c433
Faulting application path: D:\Microsoft Flight Simulator X\fsx.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: da6b676d-8df0-11e4-a6c3-60a44c617c54


Mr Leny

CPU I7 8700K @ 5.0GHz , MOBO -Asus Maximus X Hero (WiFi AC),GPU - GTX1080 TI , RAM - CORSAIR Vengeance RGB 16GB DDR4 3600MHz
SSD -Crucial MX500 1TB (P3D Install Only)
OS- Samsung 960 EVO 500GB (Window 10 Pro 64)

 

 

Share this post


Link to post
Share on other sites

I just notice i had the incorrect version of UIAutomationCore. The version that was in my fsx folder was version 6.0.6001.18000. I fallowed as AVSIM Guide suggested an downloaded version 6.0.5840.16386 , and i place it into fsx main root folder. I don't know if that might be the cause of the OOM. I notice it is also related to Kernelbase.dll


Mr Leny

CPU I7 8700K @ 5.0GHz , MOBO -Asus Maximus X Hero (WiFi AC),GPU - GTX1080 TI , RAM - CORSAIR Vengeance RGB 16GB DDR4 3600MHz
SSD -Crucial MX500 1TB (P3D Install Only)
OS- Samsung 960 EVO 500GB (Window 10 Pro 64)

 

 

Share this post


Link to post
Share on other sites

 

 


I just notice i had the incorrect version of UIAutomationCore. The version that was in my fsx folder was version 6.0.6001.18000.

 

Both versions will work.  I would remove it unless you are having menu crashes.  The fix for menu crashes is placing the uiautomationcore.dll in the main fsx folder.  It is the only reason you should have the uiautomationcore.dll in your main fsx folder.  Otherwise, remove it to a temporary folder and see if this fixes the problem.

 

The AVSIM CTD Guide provides the only probable solutions to this error that I am aware of.  See page 13. 

 

Best regards,


Jim Young | AVSIM Online! - Simming's Premier Resource!

Member, AVSIM Board of Directors - Serving AVSIM since 2001

Submit News to AVSIM
Important other links: Basic FSX Configuration Guide | AVSIM CTD Guide | AVSIM Prepar3D Guide | Help with AVSIM Site | Signature Rules | Screen Shot Rule | AVSIM Terms of Service (ToS)

I7 8086K  5.0GHz | GTX 1080 TI OC Edition | Dell 34" and 24" Monitors | ASUS Maximus X Hero MB Z370 | Samsung M.2 NVMe 500GB and 1TB | Samsung SSD 500GB x2 | Toshiba HDD 1TB | WDC HDD 1TB | Corsair H115i Pro | 16GB DDR4 3600C17 | Windows 10 

 

Share this post


Link to post
Share on other sites

Hi Jim, i had updates that i haven't install . Do you think not having Microsoft.net  Framework updates installed could be the cause to OOM?


Mr Leny

CPU I7 8700K @ 5.0GHz , MOBO -Asus Maximus X Hero (WiFi AC),GPU - GTX1080 TI , RAM - CORSAIR Vengeance RGB 16GB DDR4 3600MHz
SSD -Crucial MX500 1TB (P3D Install Only)
OS- Samsung 960 EVO 500GB (Window 10 Pro 64)

 

 

Share this post


Link to post
Share on other sites

Those are security updates Mr Lemy and fix vulnerabilities in Microsoft.net.  They should be installed.  However, if you see FSX suddenly not working anymore after a security update or other anomalies, then you can uninstall it by right clicking the Computer icon on your desktop and selecting Properties then Windows Update then Installed Updates (or click on the Start button, type Installed in the search box and then look up in the Menu and click on Installed Updates or get to it through the Control Panel).  They are usually ordered by date of installation.  The last time I had any update for my dotnet was on 11/19/2014 and I have not seen any problems.  You can also do a system restore to a date prior to when fsx started to crash and see if that fixes the problem too.

 

Best regards,


Jim Young | AVSIM Online! - Simming's Premier Resource!

Member, AVSIM Board of Directors - Serving AVSIM since 2001

Submit News to AVSIM
Important other links: Basic FSX Configuration Guide | AVSIM CTD Guide | AVSIM Prepar3D Guide | Help with AVSIM Site | Signature Rules | Screen Shot Rule | AVSIM Terms of Service (ToS)

I7 8086K  5.0GHz | GTX 1080 TI OC Edition | Dell 34" and 24" Monitors | ASUS Maximus X Hero MB Z370 | Samsung M.2 NVMe 500GB and 1TB | Samsung SSD 500GB x2 | Toshiba HDD 1TB | WDC HDD 1TB | Corsair H115i Pro | 16GB DDR4 3600C17 | Windows 10 

 

Share this post


Link to post
Share on other sites

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    33%
    $8,485.00 of $25,000.00 Donate Now
×
×
  • Create New...