I can move around in the cockpit ok and moving around outside is fine and going inside to out is good but when I go from out to back into the cockpit, I see an outside partially constructed fuselage. The way I fix the problem is right clicking the mouse and checking the VC , which was in VC but somehow it boes to cockpit when I make the switch from in to out. I do the configuration tool when needed. I know this isn't right, any thoughts ?

Hi jetsmell,

 

sounds like some of the default hotkey assignments of FSX are still active. As a consequence the systems tries to activate two different views at the same time. You should check FSX button and keyboard assignments and make sure that none of the assignments you use in EZCA is active there.

 

Peter

I checked the hot keys in FSX, nothing there. I even checked FSUIPC 4, nothing.I updated the drivers in my Saitek 52 , that didn't help either.

Open your camera config and check under [CameraDefinition.002] and make sure the last line reads: HotKeySelect=1

 

The camera.cfg is in your users/appdata/roaming...etc.

 

 

I checked the hot keys in FSX, nothing there. I even checked FSUIPC 4, nothing.I updated the drivers in my Saitek 52 , that didn't help either.

AS you can see I have two definitions 002, separated by a definition 001.

There is no HotKeySelect =1 at the last line of the first Definition 002. Should I add HotKeySelect=1 there also ?

 

[CameraDefinition.002]
Title = Virtual Cockpit
Guid = {C95EAB58-9E4A-4E2A-A34C-D8D9D948F078}
Description = This is the description of the virtual cockpit view.
Origin = Virtual Cockpit
MomentumEffect =No
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = None
ShowAxis = YES
AllowZoom = TRUE
InitialZoom = 0.7
SmoothZoomTime = 2.0
ZoomPanScalar = 1.0
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0
[CameraDefinition.001]
Title = Cockpit
Guid = {B1386D92-4782-4682-A137-738E25D1BAB5}
Description = This is the description of the cockpit view
Origin = Cockpit
ShowPanel = Yes
SnapPbhAdjust = Ordinal
SnapPbhReturn = True
PanPbhAdjust = Ordinal
PanPbhReturn = True
Track = None
ShowAxis = FrontOnly
AllowZoom = TRUE
InitialZoom = 1.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
HotKeySelect=2

[CameraDefinition.002]
Title = Virtual Cockpit
Guid = {C95EAB58-9E4A-4E2A-A34C-D8D9D948F078}
Description = This is the description of the virtual cockpit view.
Origin = Virtual Cockpit
MomentumEffect =Yes
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = None
ShowAxis = YES
AllowZoom = TRUE
InitialZoom = 0.7
SmoothZoomTime = 2.0
ZoomPanScalar = 1.0
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0
HotKeySelect=1

[CameraDefinition.003]
Title = Spot
Guid = {BCA3FDD1-FB83-4BBA-8407-4922A7F0D00C}
Description = This is the description of the spot view.
Origin = Center
SnapPbhAdjust = Ordinal
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = FlatChase
ShowAxis = No
AllowZoom = Yes
InitialZoom = 1.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = Yes
ShowLensFlare=TRUE
Category = Outside
ClipMode = Spot
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0

[CameraDefinition.004]
Title = Locked Spot
Guid = {BCA3FDD1-FB83-4BBA-8407-4922A7F0D00D}
Description = This is the description of the spot view.
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = FlatChaseLocked
ShowAxis = No
AllowZoom = Yes
InitialZoom = 1.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = Yes
ShowLensFlare=TRUE
Category = Outside
ClipMode = Spot
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0
HotKeySelect=3

[CameraDefinition.005]
Title = FlyBy
Guid = {6B79DD49-9B4A-439D-BF40-ACBF157B0BA0}
Description = This is the description of the fly by view.
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = FlyBy
ShowAxis = No
AllowZoom = Yes
InitialZoom = 10.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = No
ChaseDistance = 500
ChaseHeading = 15
ChaseAltitude = 10
ChaseTime = 20
ShowLensFlare=FALSE
Category = Outside
ClipMode = Tower

[CameraDefinition.006]
Title = Top-Down
Guid = {A2849229-938A-448f-8AC6-01EF2291C171}
Description = This is the description of the map or top down view.
Origin = Center
SnapPbhAdjust = Orthogonal
PanPbhAdjust = Orthogonal
Track = None
ShowAxis = Yes
AllowZoom = Yes
InitialZoom = 256
SmoothZoomTime = 2.0
ShowWeather = No
XyzAdjust = FALSE
Transition = No
ShowLensFlare=FALSE
Category = Outside
HotKeySelect=4

[CameraDefinition.007]
Title = Nearest Tower
Guid = {60BC0819-BD04-4AF6-8954-8FC8AA3545FF}
Description = This is the description of the tower view.
Origin = Tower
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = Track
ShowAxis = No
AllowZoom = Yes
InitialZoom = 8.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = No
ShowLensFlare=FALSE
Category = Tower
ClipMode = Tower
NoSortTitle = True

[CameraDefinition.008]
Title = Facilities Tower
Guid = {AA8C80C0-9EE2-4284-A1C2-B20CD3F5F3D9}
Description = This is the description of the tower view.
Origin = Fixed
InstancedBased = Yes
SnapPbhAdjust = None
PanPbhAdjust = None
Track = Track
ShowAxis = No
AllowZoom = Yes
InitialZoom = 8.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = No
ShowLensFlare=FALSE
Category = Tower
CycleHideRadius = 7
ClipMode = Tower

[CameraDefinition.009]
Title = Facilities Runway
Guid = {607C4520-CA6F-4135-AE10-8BF28838068F}
Description = This is the description of the runway view.
Origin = Virtual Cockpit
InstancedBased = Yes
SnapPbhAdjust = None
PanPbhAdjust = None
TargetCategory = Fixed
Track = TrackBank
ShowAxis = Yes
AllowZoom = Yes
InitialZoom = 1.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = No
ShowLensFlare=FALSE
Category = Runway
CycleHideRadius = 7
ClipMode = Tower
CycleHidden=Yes

[CameraDefinition.010]
Title = AI Planes
Guid = {75A8357E-AB58-4294-9416-90C73FAFDD90}
Description = This is the description of the AI aircraft view.
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = FlatChaseLocked
InstancedBased = Yes
ShowAxis = No
AllowZoom = Yes
InitialZoom = 1.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = No
ShowLensFlare=TRUE
Category = AirTraffic
TargetCategory = Container
ClipMode = Spot
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0
CycleHidden=Yes

[CameraDefinition.011]
Title = Multiplayer Planes
Guid = {2559BCED-9F13-4bc0-88C8-3996B9311681}
Description = This is the description of the Multiplayer other aircraft view.
Origin = Virtual Cockpit
InstancedBased = Yes
SnapPbhAdjust = None
PanPbhAdjust = None
TargetCategory = Container
Track = TrackBank
ShowAxis = Yes
AllowZoom = Yes
InitialZoom = 1.0
SmoothZoomTime = 2.0
ShowWeather = Yes
XyzAdjust = FALSE
Transition = No
ShowLensFlare=FALSE
Category = MultiPlayer
CycleHideRadius = 7
ClipMode = Tower
CycleHidden=Yes

 

 

 

Should I add HotKeySelect=1 there also ?

 

Try this...back that file up first and then delete the first [CameraDefinition.002] down to [CameraDefinition.001].

 It Worked !!! Thank you so much rjack1282

 

 

Thank you so much rjack1282

 

Glad I could help.