January 7, 20179 yr I do not know if this is a bug or how it should work. I have a two GTN installation and set up GTN750 as GTN1 and GTN650 as GTN2 with GTN750 as master device, all works well. I close down X-Plane 10 and do a restart and 750 and 650 have switched places and the 650 is master but even as 750 is in the GTN2 pull down menu is still opens and closes with toggle _window_1. If I put gauges = GTN_650_2, GTN_750_1 to gauges = GTN_750_1, GTN_650_2 it just changes back. INT file:- [GTN] ; comma separated list of gauges gauges = GTN_650_2, GTN_750_1 [GTN_650_2] ; comma separated list of render targets. drawto = WINDOW, PANEL3D ; is the master device if true. MasterDevice = false ; connects GPS to copilot side if true. CopilotSide = false ; selects COM/NAV Radios '1' or '2'. RadiosPair = 2 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; reduce screen update rate by half. ReduceRate = false ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course if true. LinkCrs = true ; connects HSI OBS to GPS if true. LinkObs = true ; connects GPS to VOR if true. LinkVor = true ; connects GPS to Autopilot if true. LinkOto = false ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; enables automatic GPS/VLOC selection. AutoSelect = true ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to Audio Panel if true. UseAudioPanel = true ; connects GPS to Transponder if true. UseTransponder = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = true ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; sets transponder VFR code (octal default: #1200). VFRcode = #1200 ; sets fuel type: AVGAS,JETA,JETB,DIESEL FuelType = JETA ; sets ownship icon type: ; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW OwnshipIcon = AUTO ; sets TAWS type: TERR,TAWS_B,TAWS_A TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; TAWS approach air speed (knots), -1 (auto detect Vref: 15) TawsApprSpeed = -1 ; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 999) TawsFlapSpeed = -1 ; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 0) TawsGearSpeed = -1 ; sets voice type: MALE,FEMALE VoicePref = FEMALE ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; selects the default database: 0: 'Garmin (North America)', 1: 'Jeppesen (Worldwide)' NavDbType = 1 ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 [GTN_650_2.WINDOW] ; display window if true. visible = false ; show screen only gauge if true. nobezel = false ; display type: WINDOW,PANEL2D,PANEL3D frame.type = WINDOW ; display position and dimension (left,top,width,height) frame.rect = 1209,301,703,292 ; freeze display position if true. frame.lock = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 [GTN_650_2.PANEL3D] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 831,338,600,255 ; freeze display position if true. frame.lock = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 [GTN_750_1] ; comma separated list of render targets. drawto = WINDOW, PANEL3D ; is the master device if true. MasterDevice = false ; connects GPS to copilot side if true. CopilotSide = false ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; reduce screen update rate by half. ReduceRate = false ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course if true. LinkCrs = true ; connects HSI OBS to GPS if true. LinkObs = true ; connects GPS to VOR if true. LinkVor = true ; connects GPS to Autopilot if true. LinkOto = true ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; enables automatic GPS/VLOC selection. AutoSelect = true ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to Audio Panel if true. UseAudioPanel = true ; connects GPS to Transponder if true. UseTransponder = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = true ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; sets transponder VFR code (octal default: #1200). VFRcode = #1200 ; sets fuel type: AVGAS,JETA,JETB,DIESEL FuelType = JETA ; sets ownship icon type: ; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW OwnshipIcon = AUTO ; sets TAWS type: TERR,TAWS_B,TAWS_A TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; TAWS approach air speed (knots), -1 (auto detect Vref: 15) TawsApprSpeed = -1 ; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 999) TawsFlapSpeed = -1 ; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 0) TawsGearSpeed = -1 ; sets voice type: MALE,FEMALE VoicePref = FEMALE ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; selects the default database: 0: 'Garmin (North America)', 1: 'Jeppesen (Worldwide)' NavDbType = 1 ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 [GTN_750_1.WINDOW] ; display window if true. visible = false ; show screen only gauge if true. nobezel = false ; display type: WINDOW,PANEL2D,PANEL3D frame.type = WINDOW ; display position and dimension (left,top,width,height) frame.rect = 1208,1070,701,685 ; freeze display position if true. frame.lock = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 [GTN_750_1.PANEL3D] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 1418,1162,602,700 ; freeze display position if true. frame.lock = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 TOM.
January 7, 20179 yr This is a bug found when developing the GNS and we are now working in the GTN update which will include plugin stability enhancements as well as support for the latest trainer. This shouldn't be long.
Archived
This topic is now archived and is closed to further replies.