Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Crash Detection when loading cold and dark

Featured Replies

Spent a while last night brushing up on my cold and dark starts last night, I went to practice some more tonight and every time i tried to load cold and dark from left CDU it triggered crash detection, 

It only worked twice so far tonight, once was when i tried it on the runway at the default P3D Runway and a heavy gate at Barcelona LEBL . It crashed at KMCO. KJFK, and EIDW My 777 1.10.8363 is up to date and running V4 P3D.

Anyone got any ideas, is it a known problem? i searched here for a while before posting but could only find FMC/CTD problems this is not a CDT problem

BTW KMCO is where i was using last night without incident. 

Stephen

Asus Z170 Deluxe, 32 GB DDR4 Dominator Platinum, i7 6700k mild overclock, GTX Titan ( Pascal ) Win10

3 hours ago, stephenbgs said:

Anyone got any ideas, is it a known problem? i searched here for a while before posting but could only find FMC/CTD problems this is not a CDT problem

Hi Stephen,

Yes, I have an idea: turn off crash detection!  It's pretty useless and unrealistic.  You will know if you have done a hard landing and you will get obvious warnings if you over speed or have a tail strike.

Mike

 

 

                    bUmq4nJ.jpg?2

 

11 hours ago, stephenbgs said:

Spent a while last night brushing up on my cold and dark starts last night, I went to practice some more tonight and every time i tried to load cold and dark from left CDU it triggered crash detection, 

It only worked twice so far tonight, once was when i tried it on the runway at the default P3D Runway and a heavy gate at Barcelona LEBL . It crashed at KMCO. KJFK, and EIDW My 777 1.10.8363 is up to date and running V4 P3D.

Anyone got any ideas, is it a known problem? i searched here for a while before posting but could only find FMC/CTD problems this is not a CDT problem

BTW KMCO is where i was using last night without incident. 

Chances are it's being triggered by 3rd party scenery objects which are invisible but are there for the scenery design. Fairly sure the PMDG manuals say to turn this off.

Cheers,
Chris Brand
Boeing777_Banner_Pilot.jpg

  • Author

Yeah I had it off during my FSX and V3 years. I'll turn if off again. Thought this time I'd leave it on for realism I was always clipping wings when parking 😊 

Stephen

Asus Z170 Deluxe, 32 GB DDR4 Dominator Platinum, i7 6700k mild overclock, GTX Titan ( Pascal ) Win10

I don't find it to be very realistic.  If there is a crash on landing it resets to maybe 10 seconds before touchdown, which provides insufficient time to take control and eliminate the problem that  led to the crash.  Even worse with an aircraft like the PMDG 777 which has about a 20 second countdown.

Years ago in FS9, after a 14 hour flight to Hong Kong's Kaitak, I did a decent landing, but as I was taxiing off the runway I hit some invisible scenery obstacle and the sim reset to a typically useless point in the final approach.  No more crash  detection  after that!

Mike

 

                    bUmq4nJ.jpg?2

 

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.