ryanbatcund

GTN750 not taking mouse input P3D v4.1 [solved]

Recommended Posts

I'm replacing F1 setup in the Carenado C550 v2.  I did add the nobezel to true and that worked.  Except even with the popup it won't take my mouse inputs.  Meaning, neither the VC gauge or the 2d popup will take mouse input.  Is this where I need to add the xml file to intercept default click commands?

Current RealityXP.GTN.ini and c550 panel cfg:

[Vcockpit05]
Background_color=0,0,0 
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$Panel_5

gauge00=rxpGTN!GTN_750_1, 0, 0,667,794
gauge01=C2CAR!Toggle10400,     64,0, 512, 32

 

[GTN_750_1]
; is the master device if true.
MasterDevice = true 
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to HSI if true.
LinkHsi = true 
; connects GPS to HSI course if true.
LinkCrs = false
; connects HSI OBS to GPS if true.
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Autopilot if true.
LinkOto = true 
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true 
; enables automatic GPS/VLOC selection.
AutoSelect = true 
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; connects GPS to Shadin Air Data computer if true.
UseAirData = true 
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true 
; connects GPS to Audio Panel if true.
UseAudioPanel = true 
; connects GPS to Transponder if true.
UseTransponder = true 
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = false
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = AVGAS
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), -1 (auto detect Vref: 116)
TawsApprSpeed = -1
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 235)
TawsFlapSpeed = -1
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 290)
TawsGearSpeed = -1
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; selects the default database: 0: 'Garmin (North America)', 1: 'Jeppesen (Worldwide)'
NavDbType = 1
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1

[GTN_750_1.DEFAULT]
; show screen only gauge if true.
nobezel = true 
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true 
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; enable touch beyond screen bounds if true, clip if false (GTN native).
extendtouch = true 
; auto-resize dimension (width,height)
refsize = 
; left mouse button popup ident  (ex: GPS_PANEL or 225) (disables touchscreen when set).
popleft = 
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright = 
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

24127477748_3bea646a7b_o.jpgnoclickrxp by ryan b, on Flickr

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Hi Ryan,

You might want to try the v2.4.9 RC posted at the top of the forum yesterday evening. It will solve this issue and add some more features too!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now