December 21, 20178 yr Dave: Found a problem with ver 2.4.0.2 x64. Loads fine. Problem with connect: When connect is pushed pilot2atc connects to x-plane ... sort of! a) shows call sign b) Shows 3 line text message ...simulator connected, recognition engine... Grammers connected. c)The connect button DOES NOT light. d) Aircraft does not display on map e) Can import a saved flightplan but... will not respond to APPR key. Goes into a busy mode... never exits program freezes. Pushing connect again has no effect. Had to revert to 2.4.0.1x64 which works fine
December 21, 20178 yr Commercial Member Sounds like it might be taking a long time to get weather and appears to freeze. What are your weather settings and what airport are you at when this happens? Dave
December 21, 20178 yr Author Airport KISP Config:SIM weather' Metar weather From x-plane Metar.rwx file 2017/12/21 13:56 KISP 211356Z 01011KT 10SM FEW160 SCT250 01/M08 A3018 RMK AO2 SLP219 T00111078 Hope this helps\\ Glenn
December 21, 20178 yr Author Dave: I switched to NOAA weather(Config) instead using SIM weather..works FINE! Switched back to SIM wearher ....dead!
December 21, 20178 yr Commercial Member If using SIM weather, you must be sure the SIM has produced the weather information or you can have these problems. Also, if using FSX, SIM weather may or may not be available. P3D has it available but in either case, you must be connected to the SIM for it to be accessible.
Archived
This topic is now archived and is closed to further replies.