November 30, 20187 yr Also a problem with the new version on my 3 screen Surround system. When I start P3d and chaseplane, the virtual cockpit screen is fine. Burt if I try to switch to external view, it shows me the airplane cabin instead of my normal external view (this is with A320 but same behavior with other plane). If I make the following sequence with 2 consecutive Chaseplane shudown and restart, I can solve the problem. First restart: ========= - Put enabled advance settings to OFF - close and restart Chaseplane. This solve the external view but now the VC cockpit view is overzoomed. second restart ============ - put back enabled advance settings to ON. - Then shutdown and restart chaseplane Now everything work fine. No zoom problem in the VC and the switch to external view works fine also. Anyway to correct this ? Thanks... Edited November 30, 20187 yr by kama2004 PierreP3D when its freezing in Quebec....well, that's most of the time...C-GDXL based at CYQB for real flying when its warming up...
December 1, 20187 yr I experience the same behavior where my outside views of the aircraft won't work until i disable advanced settings but it doesn't resolve on my end with the method Quote First restart: ========= - Put enabled advance settings to OFF - close and restart Chaseplane. This solve the external view but now the VC cockpit view is overzoomed. second restart ============ - put back enabled advance settings to ON. - Then shutdown and restart chaseplane Here is my report file.
December 1, 20187 yr Commercial Member 12 hours ago, drmengueche said: I experience the same behavior where my outside views of the aircraft won't work until i disable advanced settings but it doesn't resolve on my end with the method Here is my report file. Can you get in touch with us through our Support page: https://oldprop.com/sim/support/products/ChasePlane/ Keven Menard Technical Director, //42.
December 1, 20187 yr Commercial Member Ok we found the source of the issue. We published 1.0.20 on the Experimental channel. Please test that version and report back here to let me know if the issue is fixed. Keven Menard Technical Director, //42.
December 1, 20187 yr 1 hour ago, Keven Menard said: Ok we found the source of the issue. We published 1.0.20 on the Experimental channel. Please test that version and report back here to let me know if the issue is fixed. I have the same issue and 1.0.20 does not fix the issue. Cannot use external views. Internal work just fine. 9800x3d | 64GB DDR5 6000 Ram |MSI Gaming Trio OC 5090 @ 3.0GHZ | X870e Mag Tomahawk | 2x 2TB M.2 | Lian LI Dynamic XL ROG Case | Hotas Warthog Joystick and Throttle, Crosswind Rudder Pedals | Corsair Nightblade | K95 RGB| | LG 28" 4k, Dell 34" AW3420DW Ultrawide| Windows 10 Pro | MSFS2024 | Custom Water Loop |
December 1, 20187 yr Commercial Member 1 minute ago, akabam said: I have the same issue and 1.0.20 does not fix the issue. Cannot use external views. Internal work just fine. Please contact us through our support page https://oldprop.com/sim/support/products/ChasePlane/ Keven Menard Technical Director, //42.
December 1, 20187 yr 2 minutes ago, Keven Menard said: Please contact us through our support page https://oldprop.com/sim/support/products/ChasePlane/ Sent a message with log on google doc. Thanks 9800x3d | 64GB DDR5 6000 Ram |MSI Gaming Trio OC 5090 @ 3.0GHZ | X870e Mag Tomahawk | 2x 2TB M.2 | Lian LI Dynamic XL ROG Case | Hotas Warthog Joystick and Throttle, Crosswind Rudder Pedals | Corsair Nightblade | K95 RGB| | LG 28" 4k, Dell 34" AW3420DW Ultrawide| Windows 10 Pro | MSFS2024 | Custom Water Loop |
December 1, 20187 yr Author 2 hours ago, Keven Menard said: Ok we found the source of the issue. We published 1.0.20 on the Experimental channel. Please test that version and report back here to let me know if the issue is fixed. Hi Keven, all is fine on my system with version .20...... thank a lot... PierreP3D when its freezing in Quebec....well, that's most of the time...C-GDXL based at CYQB for real flying when its warming up...
December 1, 20187 yr Quote Ok we found the source of the issue. We published 1.0.20 on the Experimental channel. Please test that version and report back here to let me know if the issue is fixed. It worked aswell on my system, also i updated the sim from 4.3 to 4.4.
Archived
This topic is now archived and is closed to further replies.