Hi guys

My airplane doesn't show in PRO-ATC  when I reload the flight plan in to P3d .

I got B60 duke loaded in p3d  and also i added the same plane in Pro-atc ,looks this pro-atc works only for airliners .

https://imgur.com/a/UerU0tC

thanks meyer

1 hour ago, frmeyer said:

My airplane doesn't show in PRO-ATC

Do you mean it is not showing in the aircraft list when you select "fly now" or it's not showing on some other screen. If you want to use the B60 for your flight, after you select "fly now" and the Proatx flightplan opens, don't select any aircraft, just click  okay or continue, you then use the ProatX default keys that you have set for each function - ie talk to ATC, request clearance etc. ProatcX will still provide ATC for to Duke for clearance, taxi, climb, cruise, descent,landing and taxi.

Edited March 7, 20197 yr by JustanotherPilot

Based on what I can see in the attached image, no, the RA Turbine Duke will not appear on that flight plan screen. (In other words, Pro-ATC/X will not automatically load the Flight Plan into whatever GPS you may be using for the aircraft.)

The aircraft (Duke B60) will still work with Pro-ATC/X!

Pro-ATC/X will work with all aircraft (at least for me, so far)...it will also work with GA aircraft flying IFR. 

If you haven't done so already, you may want to look at creating a "TAIL" aircraft ID for your GA aircraft. (http://www.pointsoftware.de/proatcxforum/forum/index.php?topic=1648.0)

Do you mean it is not showing in the aircraft list when you select "fly now"

not showing in aircraft list

https://imgur.com/a/UerU0tC

 

thanks

hi guys

https://imgur.com/a/mqxRCHc

is running in the back ground ,looks good ,please check

if I running in any problems I let you know

thanks regards