Sign in to follow this  
cavaricooper

AT(former Sibwings) AND Aerosoft An-2 Module

Recommended Posts

Posted (edited)

Guenter-

You know I am a fan, and now that the updated version is out for v4.5 could we please revisit this?  I have BOTH this version and the Aerosoft An-2 (also just updated). Is it possible for the one module to work with both?  If not, the AT version should be mostly ok, as it is the updated Sibwings version, nicht?

Grosse Danke!


C

Edited by cavaricooper

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Posted (edited)

Hello Carl,

 

indeed I have started with a Aerosoft AN2 module, and no, it is not possible to use this for both.

 

During the programming of the module, which lets me dive deep into the systems of such an addon. I have encountered some "typical Aerosoft" issues, which have slowed my enthusiasm a bit 😉

 

So, I asked myself, if the AT version is better than the AS version?

Does the AT Version have a deep enough system and engine simulation?

Is the engine interior sound better than the AS one, which is very silenced and kills immersion in my opinion?

Does it have animated raindrops on the windscreen?

 

If you could answer some of these questions positive it could be highly possible that I will get the AT AN2 also 😀

Edited by guenseli

Share this post


Link to post
Share on other sites

Ok, I was too curious and couldn't resist ... and bought the sibWings/AT AN2 also.

 

And it was very clear for me, that the Aerosft AN2 is much better. Systems are much deeper!

And I was able to "transform" the engine sound from the AT AN2 to the AS AN2 and it is now a joy to fly. That was really sth. that was killing the immersion.

 

So, get yoursefl also the Aerosoft AN2 and you could enjoy a LINDA module very soon 😉

Share this post


Link to post
Share on other sites

Guenter-

I have both versions already.  See email.

Thanks- C

Share this post


Link to post
Share on other sites

Ok, here is a description, how you could do it easily:

 

 

1) Copy all AT Antonov sounds from the ATS An2 into the AS sound folder:

AT sounds are in

Prepar3D v4\SimObjects\Airplanes\ATS_Antonov_2\sound

 

AS sounds are normally in

Prepar3D v4\Ecosystem\Aerosoft\OctopusGroup An-2\SimObjects\Airplanes\OctopusG_An-2\sound

(I write "normally" as they could have been also installed in a different location, but then you should know where it is)

 

 

Attention: DO NOT copy the file sound.cfg from AT to AS sound folder! Just copy all *.wav files (hope you have the file endings enabled?) We don't need all *.wav files, but doesn't matter, just copy them all.

 

 

2) Edit the sound.cfg file of the AS An2

First back up the original one! Copy it onto a save place or whatever.

 

Then copy this modified code into the AS AN2 sound.cfg and replace it completely!

[FLTSIM]
product_code=FSIM

[SOUND_ENGINE]
number_of_engines=1
ENG1_COMBUSTION=COMBUSTION.1.00
ENG1_STARTER=starterA
ENG1_COMBUSTION_START=combstartA
ENG1_SHUTDOWN=shutdownA
ENG1_PROP=PROP.1.00
ENG1_NON_COMBUSTION=NON_COMBUSTION.1.00


[starterA]
filename=AN-2_starter
flags=0
viewpoint=1
link=starterA.1

[starterA.1]
filename=xAN-2_starter
flags=0
viewpoint=2

[combstartA]
filename=AN-2_startup
flags=0
viewpoint=1
link=combstartA.1

[combstartA.1]
filename=xAN-2_startup
flags=0
viewpoint=2

[shutdownA]
filename=AN-2_shutdown
flags=0
viewpoint=1
link=shutdownA.1

[shutdownA.1]
filename=xAN-2_shutdown
flags=0
viewpoint=2

[NON_COMBUSTION.1.00]
filename=AN-2_noncombust
flags=0
viewpoint=1
rparams=0.000000,0.977000,1.000000,1.682000
vparams=0.000000,0.000000,0.218000,0.000000,0.324000,17.600000,0.512000,17.600000,0.694000,14.400000,0.806000,15.200000,0.900000,15.200000,1.000000,13.600000
link=NON_COMBUSTION.1.01

[NON_COMBUSTION.1.01]
filename=xAN-2_noncombust
flags=0
viewpoint=2
rparams=0.000000,0.794000,1.000000,1.245000
vparams=0.000000,0.000000,0.264000,0.000000,0.370000,4.000000,0.572000,7.200000,0.725000,8.000000,0.863000,9.600000,0.919000,8.800000,0.972000,10.400000



[COMBUSTION.1.00]
filename=AN-2_rpm1
flags=0
viewpoint=1
rparams=0.000763,0.893617,0.231298,1.234043
vparams=0.000000,75.477707,0.049618,64.012741,0.083969,55.732483,0.112214,25.796179,0.119847,15.286624,0.177863,0.000000,0.206870,0.000000,0.314504,0.000000
link=COMBUSTION.1.01

[COMBUSTION.1.01]
filename=AN-2_rpm2
flags=0
viewpoint=1
rparams=0.003053,0.914894,0.508397,1.425532
vparams=0.000000,0.955414,0.051908,9.235669,0.169466,74.522293,0.361069,76.114647,0.509160,11.146497,0.624427,0.000000,0.822901,0.000000,0.912977,0.000000
link=COMBUSTION.1.02

[COMBUSTION.1.02]
filename=AN-2_rpm3
flags=0
viewpoint=1
rparams=0.139695,0.787234,1.000000,1.319149
vparams=0.129008,0.000000,0.310687,25.796179,0.461832,83.121017,0.579389,90.764328,0.659542,84.394905,0.736641,91.401276,0.873282,69.108284,1.000000,71.974525
link=COMBUSTION.1.03

[COMBUSTION.1.03]
filename=AN-2_rpm4
flags=0
viewpoint=1
rparams=0.533588,1.021277,0.971756,1.297872
vparams=0.512977,0.000000,0.590840,15.605096,0.700000,37.579617,0.777099,69.108284,0.836641,92.675156,0.893130,97.452232,0.951435,87.234039,0.995585,89.361702
link=COMBUSTION.1.04

[COMBUSTION.1.04]
filename=xAN-2_rpm1
flags=0
viewpoint=2
rparams=0.000763,0.893617,0.231298,1.234043
vparams=0.000763,57.643311,0.039695,51.592358,0.061832,41.719746,0.103817,15.923567,0.123664,6.687898,0.151145,0.000000,0.206870,0.000000,0.314504,0.000000
link=COMBUSTION.1.05

[COMBUSTION.1.05]
filename=xAN-2_rpm2
flags=0
viewpoint=2
rparams=0.003053,0.914894,0.508397,1.425532
vparams=0.000000,0.955414,0.051908,9.235669,0.120611,57.006371,0.403817,66.242035,0.509160,11.146497,0.624427,0.318471,0.822901,0.000000,0.861069,0.000000
link=COMBUSTION.1.06

[COMBUSTION.1.06]
filename=xAN-2_rpm3
flags=0
viewpoint=2
rparams=0.139695,0.787234,0.995420,1.340425
vparams=0.129008,0.000000,0.325954,23.566879,0.461832,71.019112,0.556489,85.987259,0.659542,84.394905,0.736641,91.401276,0.867176,46.496815,0.997710,35.987263
link=COMBUSTION.1.07

[COMBUSTION.1.07]
filename=xAN-2_rpm4
flags=0
viewpoint=2
rparams=0.533588,1.021277,0.959542,1.319149
vparams=0.512977,0.000000,0.590840,15.605096,0.661832,37.579617,0.752672,67.834396,0.836641,92.675156,0.893130,97.452232,0.951435,87.234039,0.997710,85.350319
link=COMBUSTION.1.08

[COMBUSTION.1.08]
filename=xAN-2_rpm5
flags=0
viewpoint=2
rparams=0.587023,0.276596,0.999237,0.574468
vparams=0.351908,0.000000,0.416031,0.000000,0.502290,0.000000,0.570992,0.000000,0.729771,20.382166,0.891603,61.146496,0.957252,100.000000,0.996183,100.000000


[PROP.1.00]
filename=ai14_prop
flags=4
viewpoint=1
rparams=0.000000,0.803000,1.000000,1.231000
vparams=0.178000,0.000000,0.326000,3.200000,0.444000,5.000000,0.588000,7.000000,0.708000,8.400000,0.792000,9.600000,0.875000,10.400000,1.000000,11.200000
link=PROP.1.01

[PROP.1.01]
filename=ean2_prop
flags=4
viewpoint=2
rparams=0.000000,0.831000,1.000000,1.176000
vparams=0.225000,0.000000,0.387000,5.400000,0.444000,6.400000,0.620000,7.200000,0.738000,8.000000,0.808000,8.400000,0.889000,9.000000,1.000000,10.200000




[WIND_SOUND]
filename=wind_general
minimum_volume=6000
maximum_volume=9200
minimum_rate=0.60
maximum_rate=0.90
minimum_speed=40.0
maximum_speed=220.0



[CENTER_TOUCHDOWN]
filename=cmtouch7, cmtouch8

[LEFT_TOUCHDOWN]
filename=cmtouch1, cmtouch2, cmtouch3

[RIGHT_TOUCHDOWN]
filename=cmtouch4, cmtouch5, cmtouch6

[FUSELAGE_SCRAPE]
filename=smblylnd
flags=0
viewpoint=1
minimum_rate=0.50
maximum_rate=2.00

[LEFT_WING_SCRAPE]
filename=smwngscr
flags=0
viewpoint=1

[RIGHT_WING_SCRAPE]
filename=smwngscr
flags=0
viewpoint=1

[GROUND_ROLL]
filename=cnroll2
flags=125218
viewpoint=1
minimum_speed=2.00
maximum_speed=80.00
minimum_volume=6000
maximum_volume=10000
minimum_rate=0.80
maximum_rate=1.60
link=GROUND_ROLL2

[GROUND_ROLL2]
filename=cnroll
flags=6612
viewpoint=1
link=GROUND_ROLL3

[GROUND_ROLL3]
filename=cnroll3
flags=121300
viewpoint=1
link=GROUND_ROLL4

[GROUND_ROLL4]
filename=cnroll4
flags=512
viewpoint=1
link=GROUND_ROLL5

[GROUND_ROLL5]
filename=cnroll5
flags=1024
viewpoint=1
link=GROUND_ROLL6

[GROUND_ROLL6]
filename=cnroll6
flags=131072
viewpoint=1


[FLAPS]
filename=
flags=0
viewpoint=1
initial_volume=8000

[EXIT_OPEN]
filename=canopy_slide

[EXIT_CLOSE]
filename=canopy_latch

[CRASH_SOUND]
filename=encrash1,encrash2
flags=0
viewpoint=1

[SPLASH_SOUND]
filename=ensplas1,ensplas2
flags=0
viewpoint=1

 

 

 

Thats all, enjoy the sounds!

And hopefully a LINDA module soon ;)

  • Upvote 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this