Dear friends,

I created some checklists for the Baron 58 and stored them in the aircraft folder and they where ok. Now I wanted to change them and put the new file in the folder, but the GTN 750 keeps the old one.

I reinstalled already the device, but it is the same thing.

What can I do to solve that problem?

HI,

You might need to exit the sim so that the add-on closes and Windows releases the old file handle?

 

Look at the folder contents and make sure the newer file was not saved with a .txt file extension.

21 hours ago, RXP said:

HI,

You might need to exit the sim so that the add-on closes and Windows releases the old file handle?

 

I did it several times. I also reinstalled the device but id woeks not properly.

Can you list the files found in the aircraft folder which you're trying to add/change the checklist?

19 hours ago, RXP said:

Can you list the files found in the aircraft folder which you're trying to add/change the checklist?

aircraft.cfg
beech_baron_58_check.htm
beech_baron_58_ref.htm
checklist.ace
realityXP.GTN.ini

 

can you try renaming the file to:

checklist.gtn (instead of .ace)

On 2/1/2020 at 9:41 PM, RXP said:

can you try renaming the file to:

checklist.gtn (instead of .ace)

I tried it, but it is the same thing.

I'm sorry but we can't repro the issue on our end:

1) copy a checklist.gtn to the aircraft folder.

2) start the simulator

3) validate the checklist shows correct.

4) exit the simulator

5) rename the checklist.gtn to checklist(other).gtn

6) copy another checklist file to the aircraft folder as checklist.ace

NB: using .ace in our tests just to validate there is no bug with the filename extension detection in our code.

7) start the simulator

8 ) validate the checklist shows correctly and is the new one.

 

At this stage I'd make sure:

1) you're spelling the file name properly (no missing 'c' before the 'k')

2) you're copying the checklist.gtn (or checklist.ace) file into the correct aircraft folder (most likely the issue you're having)

On 2/4/2020 at 1:51 AM, RXP said:

I'm sorry but we can't repro the issue on our end:

1) copy a checklist.gtn to the aircraft folder.

2) start the simulator

3) validate the checklist shows correct.

4) exit the simulator

5) rename the checklist.gtn to checklist(other).gtn

6) copy another checklist file to the aircraft folder as checklist.ace

NB: using .ace in our tests just to validate there is no bug with the filename extension detection in our code.

7) start the simulator

8 ) validate the checklist shows correctly and is the new one.

 

At this stage I'd make sure:

1) you're spelling the file name properly (no missing 'c' before the 'k')

2) you're copying the checklist.gtn (or checklist.ace) file into the correct aircraft folder (most likely the issue you're having)

I tried it, but it doesn't work. Somewhere the device is holding the old one.

Ok, what you can do then is:

1) open the RealityXP.GTN.ini file in the aircraft folder with notepad

2) under [GTN_750_1] add the following line:

LogTrainer = 4

NB: this assume you're trying this with the GTN 750 Unit 1 device.

3) start the simulator, skip the POST pages and exit.

4) review and report the content of the "My Documents\rxpGtnSim.dll.log" file

13 hours ago, RXP said:

Ok, what you can do then is:

1) open the RealityXP.GTN.ini file in the aircraft folder with notepad

2) under [GTN_750_1] add the following line:

LogTrainer = 4

NB: this assume you're trying this with the GTN 750 Unit 1 device.

3) start the simulator, skip the POST pages and exit.

4) review and report the content of the "My Documents\rxpGtnSim.dll.log" file

OK, that is the result:

20/02/06 11:00:18.677 09892 -    ] # rxpGtnSim64.dll version 2.5.22.1
20/02/06 11:00:18.676 09892 INFO ] 
20/02/06 11:00:34.187 09892 INFO ] using: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\beech_baron_58\checklist.ace
20/02/06 11:00:34.303 09892 INFO ] using: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\beech_baron_58\checklist.ace
20/02/06 11:00:34.322 14976 INFO ] GTN 750.1 - TRAINER 6620
20/02/06 11:00:34.331 14976 WARN ] GTN 750.1 process is running as-admin
20/02/06 11:00:34.650 14976 INFO ] GTN 650.2 - TRAINER 6620
20/02/06 11:00:34.658 14976 WARN ] GTN 650.2 process is running as-admin

1 hour ago, josef050153 said:

using: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\beech_baron_58\checklist.ace

Are you flying the Baron 58?

Is the folder above is the one you're copying the 2nd checklist over?

If you exit the sim, delete the checklist.ace file from the beech_baron_58 folder, then restart the sim, is the GTN still displaying a checklist?

I did all that before, but it doesn't work.

The log file shows the full path to the Baron 58 checklist file the GTN is loading:

C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\beech_baron_58\checklist.ace

 

1. Are you flying the Baron 58?
2. If so and you exit the sim, delete the checklist.ace file from the beech_baron_58 folder (see full path above), then restart the sim, is the GTN still displaying a checklist?