Hello

I bought the Mindstar G1000 Advanced licence. I want to use the PFD and MFD in separate monitors (VGA 800x600). I'm using the Carenado KingAir 200 and following the retrofit instructions I create 2 new popup windows for PFD and MFD.

My PC has a really good performance on Prepar3d V3.4, I get 90 fps on Carenado King Air 200 however when I open the G1000 (PFD and MFD) windows the value of FPS drops dramatically from 90fps to 18fps.

I try to change the SHOW_ALL_INSTANCES to OFF and to ON as well, but continue the FPS isuue.

When I flying only the prepar3d without G1000 popup windows the CPU performance is good, all cores in the task manager work at the same porcentage. However when I open the G1000 popup windows 1 Core (generally the firts) increase the usage to 90%. I tried to use an affinity mask setup in the prepar3d.cfg to set all cores, or to set the last 7 cores but ever 1 core is used to 90% with the G1000 windows.

I have the Windows antivirus deactivated and the error reporting service disabled.

Can you help with this issue?

 

Best Regards.

 

 

My PC Setup:

Intel Core i7 9700k overclocked to 5.0Ghz (watercooling)

RAM 16GB DDR4 3200Mhz

SSD Crucial 500GB

Nvidia Geforce GTX 1660 TI  (not 1060)

Windows 10

Prepar3D V3.4

 

 

Panel config:

[Window Titles]
Window00=EX500
Window01=GP400
Window02=EADI EHSI
Window03=AUTOPILOT
Window04=Toggle_Control
Window05=G1000 PFD
Window06=G1000 MFD

[Window05]
Background_color=0,0,0
size_mm=813,550
window_size_ratio=1.000
position=6
visible=0
// The Mindstar G1000 requires the popup PFD to have an ident code of 11000
ident=11000
gauge00=MPI_G1000!PFD, 0, 0, 813, 550, PFD1|King.Air

[Window06]
Background_color=0,0,0
size_mm=813,550
window_size_ratio=1.000
position=8
visible=0
// The Mindstar G1000 requires the popup MFD to have an ident code of 11001
ident=11001
gauge00=MPI_G1000!MFD, 0, 0, 813, 550, MFD1|King.Air
 

I setup the G1000 ini file following the manual and set all parameters for King.Air:

[King.Air]
Style=24
AirspeedRangeLowCaution=75
AirspeedRangeFlaps=100
AirspeedRangeNormal=157
AirspeedRangeHighCaution=240
AirspeedRangeOverspeed=260
AirspeedBugVrVisible=NO
AirspeedBugVxVisible=NO
AirspeedBugVyVisible=NO
AirspeedBugVgVisible=NO
EnableRFD=NO
AFCS=YES
WAASENABLED=YES
ShowBezel=NO
dig_crs_hdg_tmout=NO
AnimateStartup=YES
GradientHorizon=NO
ShowCirrusFuel=NO
MfdStartupImage=
AltimeterBug=8000
HobbsCounter=33798
TachCounter=33798
WAAS_RECEIVER_ENABLED=YES
MSAS_RECEIVER_ENABLED=YES
EGNOS_RECEIVER_ENABLED=YES

 

 

This one has to go to the support system from our website.