November 7, 20205 yr I installed pilot2atc today and got it to connect to FS2020 but when I use the "say it" feature to say something to ATC I don't get any response. I have a flight plan which I also imported to FS2020 and pilot2atc is showing the green indicator at the bottom left to indicate that the simulated aeroplane in FS2020 is running etc. I have not tried to use my voice, only the say it feature. I tried several phrases including the "ready to copy" one which I've seen several people started with but I have not had any response on any of the phrases that I tried.
November 7, 20205 yr I’d suggest posting this in the Pilot2ATC forum here. The dev is quite quick to respond there. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
November 7, 20205 yr I am a big user of this program with no issues. One thing, make sure you are on the correct freq otherwise the sayit will be blank also, make sure your flight plan is verified and transmitted (upper right corner of the P2A screen - should be greeen vs grey) Edited November 7, 20205 yr by Mike S KPDX CPU: Core i5-6600K 4 core (3.5GHz) - overclock to 4.3 | RAM: (1066 MHz) 16GB MOBO: ASUS Z170 Pro | GeForce GTX 1070 8GB | MONITOR: 2560 X 1440 2K
November 8, 20205 yr Author Thank you for the advice Mike S KPDX. I checked that I did all the things that you mentioned but still do not get any response. I think I will ask my question again in the Pilot2ATC forum as regis9 suggested.
Archived
This topic is now archived and is closed to further replies.