December 7, 20205 yr Hi, I just got the flight monitor for P3D v5 and I have flown 2 approaches in my cessna 182 and I get the sound after I have landed but nothing shows up on my ipad I have the cdu's for the PMDG 737 and Maddog and they work fine. I can find the approach report in the aviaworx folder that happens to be in my download folder. I hope someone has an idea of what I am doing wrong. I am sure it is probably a simple thing. Thanks for any Help David Boudreau
December 7, 20205 yr Commercial Member I don't think it provides real time data acquisition of the approach, but rather generates the report upon rollout. If it is able to show real time data, I have not been able to have that work either. KROSWYND a.k.a KILO_WHISKEYMajestic Software Development/Support Sys 1: AMD 7950X3D, NOCTUA D15S, Gigabyte Elite B650, MSI 4090, 64Gb Ram, Corsair 850 Power Supply, 2x2TB M.2 Samsung 980s, 1x4TB WDD M.2, 6xNoctua 120mm case fans, LG C2 55" OLED running at 120Hz for the monitor, Win11. Sys 2: i7 8700k, MSI GAMING MBoard, 32Gigs RAM, MSI 4070Ti & EVGA 1080Ti. Hardware: Brunner CLS-E-NG Yoke, Fulcrum One yoke, TM TPR Rudder Pedals, Yoko TQ6+ NEO, StreamDeck, Tobii Eye Tracker, Virpil VPC MongoosT-50CM3 Base with a TM gripSIMULATORS: MSFS2020/XP12/P3D v5.4 & v6: YouTube Videos
December 8, 20205 yr Author Thanks Crosswind, I am not getting any data on the ipad post landing, I have tried not running it until after landing and running while running the simulation. and approach. the only thing I see on my ipad is aviaworx approach report box and summary box both show No Data Available.
December 8, 20205 yr Commercial Member 8 hours ago, ddavbou said: Thanks Crosswind, I am not getting any data on the ipad post landing, I have tried not running it until after landing and running while running the simulation. and approach. the only thing I see on my ipad is aviaworx approach report box and summary box both show No Data Available. Hi, can you please send me your logfile and your 'lastapproach.dat' files? Then I can have a look as to why that is happening. Mark Foti Author of aviaworx - https://www.aviaworx.com
December 8, 20205 yr Author Hi marcom, I have looked around and can not figure out how to send you these two files. Thanks for any help David Boudreau Edited December 8, 20205 yr by ddavbou
December 8, 20205 yr Commercial Member 4 hours ago, ddavbou said: Hi marcom, I have looked around and can not figure out how to send you these two files. Thanks for any help David Boudreau David, Both files are located in the same directory where aviaServer is run from. The logfile is called logfile.cdulog Regards Mark Mark Foti Author of aviaworx - https://www.aviaworx.com
December 8, 20205 yr Author Mark, Hi, yes I know where the files are located but i am unable to figure out how to post them to a response. I tried to attach them to an email and 1 of them was too big. Thanks, David Boudreau
December 8, 20205 yr Commercial Member 4 minutes ago, ddavbou said: Mark, Hi, yes I know where the files are located but i am unable to figure out how to post them to a response. I tried to attach them to an email and 1 of them was too big. Thanks, David Boudreau Do you have a google account? You could upload the files to your google drive and share the link. Or dropbox / OneDrive / any other cloud storage system... Mark Foti Author of aviaworx - https://www.aviaworx.com
December 8, 20205 yr Author Mark, Lets see if this works, this is my first time trying anything like this I think the second link will work. Let me know if there are any issues and I will sort it out. https://drive.google.com/file/d/1qdyupQDoIXD67_eyg96GcR4YhGJOpV6e/view?usp=sharing https://drive.google.com/file/d/1qdyupQDoIXD67_eyg96GcR4YhGJOpV6e/view?usp=sharing David Boudreau
December 9, 20205 yr Commercial Member You'll need to activate sharing for that link in Drive. Mark Foti Author of aviaworx - https://www.aviaworx.com
December 9, 20205 yr Author Mark, Try now https://drive.google.com/file/d/1EJLOY81zZAK2ReNHKk6Ul7PoCKb_0NMu/view?usp=sharing https://drive.google.com/file/d/1qdyupQDoIXD67_eyg96GcR4YhGJOpV6e/view?usp=sharing Thanks, David Boudreau
December 10, 20205 yr Commercial Member On 12/9/2020 at 2:29 PM, ddavbou said: Mark, Try now https://drive.google.com/file/d/1EJLOY81zZAK2ReNHKk6Ul7PoCKb_0NMu/view?usp=sharing https://drive.google.com/file/d/1qdyupQDoIXD67_eyg96GcR4YhGJOpV6e/view?usp=sharing Thanks, David Boudreau Yes, that worked - thanks. I've also identified the issue and will be solved with the next release. Mark Foti Author of aviaworx - https://www.aviaworx.com
Archived
This topic is now archived and is closed to further replies.