August 18, 20214 yr For time to time (2.6.2.4_x64_beta2a), when I change freq in the sim, the freq is also changing in the P2ATC (numerals below COM1), but P2ATC seems to be not aware of the change - it still displays "Assigned Freq" instead of recoginzing it. I must click on the freq in the P2ATC, only then it recognizes the freq, displays the proper frequency name and allows itnteraction with the controller.
August 18, 20214 yr Commercial Member Assigned Freq is the frequency that ATC tells you to change to. It has nothing to do with what frequency is set on the radio.
August 18, 20214 yr Author However, when I change the frequency in the sim (for example from clearance delivery to tower), the frequency in the sim changes, the frequency displayed in P2ATC changes, but I'm still talking and getting the responses from clearance delivery. Only clicking on the freq in the P2ATC somehow triggers P2ATC to "digest" the frequency change - the freq remians the same in P2ATC but the proper name of the frequency appears and the right controller (tower in this case) starts responding. This happens randomly, not clear pattern when.
August 18, 20214 yr Commercial Member It could be a timing thing. If you change frequencies in the SIM while a controller is talking in P2A, it should stop. But if the copilot is reading back, for example, it might not stop. Dave
August 19, 20214 yr Author When I started the flight today the P2ATC was displaying just "COM" insted of "COM1" or "COM2". Only when I clicked on the COM (or close to it) in P2ATC, it realized that it should use COM1 and started displaying "COM1". The frequencies I set for COM1, were displayedin P2ATC under "COM", but P2ATC was not "realizing" them (no frequency identification shown by P2ATC), so I was not able to interact with the controller. Only after the click in the P2ATC (which traggered recognition of COM as COM1) resulted in the ability to talk with the controller and P2ATC diplaying the frequency name (e.g. EPWR Twr). I'm using hardware panel, setting frequencies on GNS530 via HVARs (HTML variables) via LorbyAxisAndOhs. The frequecy setting I change are perfectly recongized in the sim (MFS2020). Edited August 19, 20214 yr by Steku
August 20, 20214 yr Commercial Member P2A gets the active channel and frequency from FSUIPC7, which in turn gets it from MSFS. I've seen this "glitch" happen before. Seems to be a timing issue or transient glitch. It is not a bug in P2A. Dave
August 20, 20214 yr Author Thank you. Now, when I know the root cause I can easilly fix it by clicking on "COM".
Archived
This topic is now archived and is closed to further replies.