Hello everyone.

I have a problem with Axis and Ohs and my Behringer X-touch mini controller.
The knobs are poorly recognized by the software, it turns left and right on the software when I turn that one way.
I tested it with the free software and it works perfectly. I can not find a solution to solve this problem.
If anyone has any info ...
Sorry for my English .... Google ... and thanks for your help.

try their forum:

https://www.avsim.com/forums/topic/593109-axis-and-ohs-support-sub-forum/

and here some detailed examples + instructions for the A320:

https://github.com/blindye/aao_guides/blob/main/fbw_a32nx/fbw_a32nx_guide.md

x-touch mini, initial setup:

https://www.youtube.com/watch?v=2Of0t26hf40

but I agree, they should provide a better manual and complete templates for some of the most popular default aircraft and controllers.

Edited September 18, 20214 yr by turbomax

3 hours ago, D1git4l said:

The knobs are poorly recognized by the software, it turns left and right on the software when I turn that one way.

Use the X-Touch Editor (available at https://www.behringer.com/product.html?modelCode=P0B3M ) to make sure your encoders are correctly set-up. 

For encoders, I use:

Type: CC

NO. CC1 to CC8 (channel A), CC11 to CC18 (channel B)

Min / Max values  : 0 / 127

 

 

Thank you for your answers. A simple problem of parameters but now everything is working fine.
What do you use as a template @Haddock69?

the youtube (initial x-touch setup) I linked above discusses the issue. I followed those instructions and don't have that issue. I set the x-touch up for the Baron G58 and it works fine with WorkingTitle's G1000 ngx using H-vars for the Garmin G1000. 

 

I have made and tested different template with different script for the A32NX, but half of the functions don't work.
I created this template with a youtube video, same, nothing reacts in the sim. I don't know what I'm doing wrong, I reset the X-touch, it's working fine now.

 

 

and here some detailed examples + instructions for the A320:

https://github.com/blindye/aao_guides/blob/main/fbw_a32nx/fbw_a32nx_guide.md

MSFS2020 - A32NX AAO Template v0.4 for X-Touch
https://www.youtube.com/watch?v=0aO8NAsRURk

Lorby AxisAndOhs: Advanced setup (MSFS Airbus)
https://www.youtube.com/watch?v=nQhCPSLQsjs

X-Touch Mini Initial Set up
https://www.youtube.com/watch?v=2Of0t26hf40
https://www.youtube.com/watch?v=YlpNUP18CcA
https://www.youtube.com/watch?v=OCajb89QoII

 

 

Edited September 18, 20214 yr by turbomax

Hi ! Yes I had seen all these videos and templates. 
I tested them, and I followed the tutorials, but something chose that it does not work for me,
and I still cannot find what.

I began with a simple aircraft like Baron G58, imported the H-vars into Axis and Ohs while disconnected from the sim, then chose map zoom in/out from the H-vars for AS1000 for a knob on the x-touch and it works to. L-vars did not work.

9 minutes ago, turbomax said:

I began with a simple aircraft like Baron G58, imported the H-vars into Axis and Ohs while disconnected from the sim, then chose map zoom in/out from the H-vars for AS1000 for a knob on the x-touch and it works to. L-vars did not work.

you need to be connected to the sim to program the buttons. I have G1000nxi setup and I didnt use any L or HVARS

from the Axis and OHS manual page 36:

"Getting a list of all H: vars from the simulator
Use the menu option „Scripting → Read HVARs from sim“ 
to import a list of all H: vars that can be found in the various
definitions files of the simulator. 
This only works when AAO is not connected to the sim!"

which variable did you use to zoom the MFD map in/out?

Edited September 19, 20214 yr by turbomax

9 minutes ago, turbomax said:

from the Axis and OHS manual page 36:

"Getting a list of all H: vars from the simulator
Use the menu option „Scripting → Read HVARs from sim“ 
to import a list of all H: vars that can be found in the various
definitions files of the simulator. 
This only works when AAO is not connected to the sim!"

If you are trying to map the g1000 you don't need any h or lvars. Just start the sim go to an airport, start up aao and program. Everything you need is in as1000

I can selected L-VARS but not H-VARS.

5 hours ago, devgrp said:

If you are trying to map the g1000 you don't need any h or lvars. Just start the sim go to an airport, start up aao and program. Everything you need is in as1000

I wish it was that easy. it didn't work. would like to hear how you did it using the WorkingTitle G1000 NXi. My configuration: Asobo Baron G58, WorkingTitle G1000 NXi, x-touch mini, Axis and Ohs 2.12 b27

using the knobs of the x-touch mini, MSFS would only change the map zoom factor in the MFD if I used the HTML variables. the green status lights would blink ok in AAO, but no reaction in MSFS unless HTML variables were used.  as depicted here:

Edited September 20, 20214 yr by turbomax

3 hours ago, D1git4l said:

I can selected L-VARS but not H-VARS.

I suppose you didn't import the HTML variables then:

 correctly. I had described the procedure above:

Edited September 19, 20214 yr by turbomax