November 16, 20214 yr Hi I've recently resurrected my FU3 simulator and it seems to work ok on my win10 PC. I didn't play it all that much when I bought it so I didn't gather up all the "extras" back then to make it better. Now that I'm playing it again I would love to find any available airport diagrams that anyone might be able to point me in the direction of. I was trying to take off from a new airport today and the (rather irritated) ground controller suggested that I shoud check my airport diagram to find the runway. It's difficult to find your way around on the ground without some kind of reference diagrams. I read this thread.... ...but when I searched the Avsim Library I couldn't find anything, so maybe it's been taken down since then (it was a while ago in fairness). Can anyone help please? It sounds like the document did exist at one time. FU3 is a still a great game so I'm hoping some folks are still playing it now. Thanks
November 16, 20214 yr I found a PDF document for Seattle airports. https://www.flightsim.com/vbfs/fslib.php?searchid=89425165&page=4 Anyway it's not so important. If the airport is small you'll find your way. Look at the numbers of runways. This give you with the help of compass how the runway is placed (the heading). If the airport is controlled, just listen to the radio, identify yourself, and one controller will give you the taxi path to runway. Also after landing.
November 16, 20214 yr Author Hey, thanks a lot. That's a pretty useful document to have to hand for a newbie. I hadn't put "two and two" together about the runway numbers relating to their compass heading, but that makes sense now. I'm still going through the early lessons and only just about to do the lesson on patterns, approaches and such so lots to learn. The hardest part I find is not being able to get a birds-eye view of where the runway is relative to the parking and vica vera. Start the engine, release the brake. Now...there are 360 degrees out there...pick one 🙂 Anyway this will help a lot. Thanks for the link to it. Cheers
November 16, 20214 yr I forgot to say that at controlled airports once the controller has given you the right taxi path, you can visualize it by striking the following key: alt_f12 Show_Taxi_Path And this key can be modified via joykeys.cfg file. I give you below the list for all "standard" keys available: x_up Zoom_Out_Done z_up Zoom_In_Done bs Toggle_Auto_Trim tab Activate_Radio enter Repeat_Message esc Exit_Screen space Communicate " Toggle_Navigation_Lights ' Toggle_Beacon , Left_Rudder . Right_Rudder / Center_Rudder ; Toggle_Anti_Collision_Lights < Rudder_Trim_Left > Rudder_Trim_Right ? Rudder_Trim_Center B Prop_Brake C Source_Next_Comm E Select_Engine F Flaps_Up I Source_Self L Toggle_Pulse_Lights O Source_Next_Ground_Object P Source_Next_Plane X Increase_Field_Of_View Z Decrease_Field_Of_View [ Elevator_Trim_Up \ Elevator_Trim_Center ] Elevator_Trim ` Toggle_AntiIce a Autopilot_OnOff b Toggle_Parking_Brakes c Target_Next_Comm d Increment_Time_Of_Day e Start_Engine f Flaps_Down g Toggle_Landing_Gear h Toggle_Carb_Heat i Target_Self j Panel_Main_Backlighting k Toggle_Taxi_Lights l Toggle_Landing_Lights m Inflight_Map o Target_Next_Ground_Object p Target_Next_Plane q PCL r Toggle_Comm_Radio s Increment_Time_Of_Year u Toggle_Right_Landing_Light w Wax_Moon x Zoom_Out y Toggle_Left_Landing_Light ctrl_D Dump_Crashbox ctrl_M Toggle_Models ctrl_R Toggle_Blackbox_Record ctrl_d Decrement_Time_Of_Day ctrl_e Shutdown_Engine ctrl_f Toggle_Frame_Rate ctrl_l Toggle_Labels ctrl_p Toggle_Blackbox_Pause ctrl_p Pause ctrl_s Blackbox_Save_Edit ctrl_s Decrement_Time_Of_Year ctrl_v Debug_Voice_Log ctrl_w Wane_Moon ctrl_z Toggle_Zoar_Mode alt_enter Full_Screen alt_M Add_Auto_Marker alt_a Autopilot_HoldAltitude alt_d Toggle_PropDome alt_f Auto_Tune_Radio alt_g Mayday alt_h Autopilot_HoldHeading alt_m Autopilot_ToggleApr alt_n Autopilot_ToggleNav alt_o Options alt_r Change_Resolution alt_s Autopilot_HoldAirspeed alt_t Reload_Voice_Timings alt_v Autopilot_HoldVerticalSpeed alt_w Autopilot_LevelWings alt_x Quit_Game alt_y Toggle_YawDamper ctrl_alt_A Add_Hoop ctrl_alt_G Toggle_Grid_Textures ctrl_alt_H Toggle_Hoop_Stats ctrl_alt_T Cycle_Forced_Grid_Textures ctrl_alt_g Start_Grid_Test ctrl_alt_p Print_Screen ctrl_alt_q QA_Print_Screen kp_8_up Look_Up_Done kp_4_up Look_Left_Done kp_6_up Look_Right_Done kp_2_up Look_Done kp_0_up Left_Brake_Off kp_del_up Right_Brake_Off f1 Camera_Forward f2 Camera_VFR_Cockpit f3 Camera_IFR_Cockpit f4 Camera_Virtual_Cockpit f5 Camera_External f6 Camera_Chase f7 Camera_Spinning f8 Camera_Taxi f9 Camera_MTV f10 Camera_RC kp_7 Look_Left_45 kp_8 Look_Up kp_9 Look_Right_45 kp_4 Look_Left kp_5 Look_Ahead kp_6 Look_Right kp_1 Look_Left_135 kp_2 Look_Down kp_3 Look_Right_135 kp_0 Blackbox_Toggle_User_Controls_Camera kp_0 Left_Brake_On kp_, Right_Brake_On f11 Camera_Still f12 Toggle_Tape_Strip ctrl_kp_5 Center_Controls ctrl_f12 Cycle_Active_Tapestrip alt_f5 Camera_Inverse_External alt_f7 Camera_Above alt_f12 Show_Taxi_Path kp_enter Target_Next_Internal kp_* Reverse_Thrust kp_+ Throttle_Increase kp_- Throttle_Decrease kp_/ SpeedBrakes ctrl_kp_+ Mixture_Increase ctrl_kp_- Mixture_Decrease alt_kp_+ Prop_Deploy alt_kp_- Prop_Retract up_up Pitch_Off left_up Left_Roll_Off right_up Right_Roll_Off down_up Pitch_Up_Off home Target_Next_Internal2 up Blackbox_Play_Forward up Pitch_On pageup Miracle_Up left Blackbox_Frame_Backward left Left_Roll_On right Blackbox_Frame_Forward right Right_Roll_On down Blackbox_Play_Backward down Pitch_Up_On pagedown Miracle shift_kp_+ Prop_Increase shift_kp_- Prop_Decrease shift_up Blackbox_Play_Faster shift_down Blackbox_Play_Slower
November 17, 20214 yr Author Wow! That's brilliant. Thanks very much. I've got that printed out now by my PC. thanks for your help. Now, if I can just get the hang of not smashing the aircraft up every time I try to land I'll have it nailed - lol! All the best.
November 17, 20214 yr The important thing for a good landing is speed. And a plane can't maintain a speed value stable, depending on if you go up or down, and wind. So for planes that aren't light weight it is very handy to use automatic pilot for maintain speed constant. And watch also the altitude. Put trimming neutral (center trim) on final. On big airports you can use ILS approach.
November 18, 20214 yr Author Great tips. Thanks. One of the hardest things at the moment is that I so easily lose track of where the runway is until I'm right up close. It's possible that because I'm running this on a 4k monitor it's a bit more "blocky" than it would originally have been so the scenery isn't quite as defined. Eyesight isn't what it used to be either now that I'm getting older. I'm sure I'll get there though. It's quite remarkable what the human brain (even mine) can achieve with enough practice, practice, practice. Just on a slightly different note before we finish here..... have you tried any of the other flight sims that are available today...the current ones? If you have, is there anything out there now that offers the same sort of features as FU3 but with (perhaps) iimproved graphics etc? Having great fun with this but if there is an equivalent of an "FU4" by some other name that would be interesting to look at too. Lots of flight sims out there but FU3 seems to offer "role playing" missons and such which place it a little above just flying the plane.
November 18, 20214 yr And welcome to FU3 skies, springer5 😀 It is amazing that after 20+ years this sim keeps giving joy. Don't forget to experiment with the true gem of the sim, the weather! There is a recent post on the forum wherein I mentioned a link to a document by Peter James (one of the sim designers), detailing the weather workings.
April 10, 20224 yr What I think you are looking for are the FU2 Airports document by Mike Magatagan and FU3 Airports by Sergey Ostrozhinsky. There you will get all the information on every airport in FU2/3 including radio frequencies to be used, ILS frequencies, runway information, taxi ways and where parking is located. There is even a satellte overlook picture for each airport so you can get oriented properly. I have not found these documents for download anywhere but send me a PM and I shall see what I can do 🙂
Archived
This topic is now archived and is closed to further replies.