February 6, 20224 yr I set up my tiller to be the joystick twist axis on my stick. For whatever reason, I can turn the tiller to the left fully, but only about less than half way right. What could be the cause of this? Thanks! Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
February 6, 20224 yr Did you map it to the #4 Mixture axis? Maybe your default mixture control/axis is over-riding it <?>. I have mine set up in FSUIPC - but I think I also had to reverse the axis (either in MSFS of FSUIPC calibration).
February 6, 20224 yr Author 1 minute ago, Adamski_NZ said: Did you map it to the #4 Mixture axis? Maybe your default mixture control/axis is over-riding it <?>. I have mine set up in FSUIPC - but I think I also had to reverse the axis (either in MSFS of FSUIPC calibration). Yes. This is what I did. I’m not using FSUIPC though. I used to in P3d but not in MSFS Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
February 6, 20224 yr Do you have a generic mixture axis set anywhere - on your HOTAS and/or in MSFS? BTW - Is this in the DEV or Experimental FBW (I only use the DEV)? Edited February 6, 20224 yr by Adamski_NZ
February 6, 20224 yr Author 13 minutes ago, Adamski_NZ said: Do you have a generic mixture axis set anywhere - on your HOTAS and/or in MSFS? BTW - Is this in the DEV or Experimental FBW (I only use the DEV)? I don’t think so. Would I just need to go into control settings and check all of the different devices that might have that set? Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
February 6, 20224 yr 32 minutes ago, Zimmerbz said: I don’t think so. Would I just need to go into control settings and check all of the different devices that might have that set? Do a search for anything related to mixture - for keyboard and axes. What kind of stick/yoke/HOTAS are you using?
February 6, 20224 yr Author 1 hour ago, Adamski_NZ said: Do a search for anything related to mixture - for keyboard and axes. What kind of stick/yoke/HOTAS are you using? T1600 stick and Hotas warthog thrust lever Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
February 7, 20224 yr 1 hour ago, Zimmerbz said: T1600 stick and Hotas warthog thrust lever Keep in mind that the T16000 has an unreliable twist axis after a couple months of use - I've had it happen to me personally with both the base T16000 and TCA sidestick, ended up getting a Gladiator NXT instead. Please do not contact me via DM for support or help with the A32NX mod. We recommend using our help channel on our Discord.
February 7, 20224 yr I'd strongly suggest installing the free FSUIPC. You could then check to see what the inputs/outputs are for that axis. It's also possible that it makes a better job of mapping axes. If you're mapping it via FSUIPC, though, don't forget to remove the bind from your MSFS profile. I created a separate MSFS profile to use excusively for the A32NX.
Archived
This topic is now archived and is closed to further replies.