Zimmerbz

Don't get me wrong, I can still land it and I would rather a hard landing in the touchdown zone then a soft one down the runway. I just find that of the 6 flights or so that i've done in V3, 4 of them have been harder than usual. What is weird is that my Gforce has been low but the FPB has been higher than i am used to.

Yeah... i can still put it in the touchdown zone but i just always seem to slam it down a bit. Nothing crazy but different from V2. I will try less back pressure on my stick even though I don't use that much in the first place. Maybe my stick settings are too sensitive

Does anyone find that in V3 of the Fenix that on landing during flare mode when I pull back on the stick like I normally do the plane will stay at the altitude or even climb slightly? And then when you retard to idle, the plane drops like a rock to the runway? I thought in v3 that was supposed to be the opposite. Anyone else seeing this?

Thanks. The new app fixed it.

I am having an issue with the desk top FCU not connecting to the sim. I can power it on and the lights will flash but when I start the application, it says waiting to connect to sim and sdk. This happened out of nowhere. Any thoughts on how I can fix it? I emailed Skalarki but thought I'd check here too in case this has happened to anyone else.

Can you confirm the difference between sim EFB and Fenix EFB? The issue i am having is that I have the app installed but I can't find anything related to settings for the tech log. I have been asking copilot but the answers I am getting aren't that consistent. Apparently i have the "Fenix Installer" and not the "Fenix Launcher" and that is why I am not able to get into the tech log menu? Having said that, I have no idea where do get the "launcher" because when I log into the Fenix site, in the dashboard the only download I see is the installer. I must be doing something wrong.... Having said that my Fenix for the last few years has been flying well so it can't be a huge issue. Any thoughts?

I downloaded the app and am running it but I don't see it in the EFB. Did I misunderstand something? Thanks

I bought the KORD and think it looks great. I haven't explored the whole airport yet but I noticed on arrival and departure (south side of the airport 28's/10's) that the taxiway signs are duplicating and one of the 2 duplicates are floating. It is almost every taxiway sign. Anyone else having this and is there a fix? I disabled Asobo ORD and removed FSDT from my community folder. Thanks!

Thanks. I’ll have to check and see if it is running. I don’t believe it is but you never know.

My auto fps automatically starts when I start the sim. I know it changes lod and I have never had it yell at me when changing other settings. Are you saying I should start the sim, choose settings then start auto fps? I have TAA on for example but every time I go into the sim that gets set to something else. Lots of things I have set to medium or high get set to ultra and vice versa. I’ve never had that before. Odd

I am going to uninstall 2020 as I never fly it anymore. Is there a trick to doing so in order to ensure it doesn't mess up anything I have in 2024? I know that is a stupid question but thought I'd check here to make sure before i do anything. They are probably independent of each other but i didn't want to uninstall it then have to reconfigure / tweak 2024 all over again.

I’ve noticed that after SU5 a few odd things happen. 1st, every time I start the sim, my settings change to something else, mostly ultra. When I change them back to what I typically use, I get some weird Auto FPS message or warning that I have never seen before. Is there something with auto fps that is causing this or vice versa? Additionally, I can’t get rid of the generic AI aircraft that sit at the gates. This happens even when I turn the traffic to low or off. I use psxt and real traffic so those planes still show but the generics are still at the gates. Any idea on what is going on?

Are there multiple places to turn it off? I thought it was in Online in settings but I checked and it is off but I still get the default planes

After SU5 I am seeing the default Boeing, Embrear, etc Liveries along with what PSXT and Real Traffic are injecting. I've never had that problem before. How do i fix that?? thanks

I have always wondered why nobody has done KCMH and KPIT for MSFS. So today i came across PacSim's KCMH on accident. When was that released? Does anyone have it and can comment on if it is any good? I have PacSim's SLC and RNO and think they do the trick but can anyone comment on CMH? Thanks

I found another issue with Pop Out Manager that I was hoping to get some guidance. I was able to get all my pop outs working on their panels but after a few flights, I realized they weren't fitting exactly how I wanted them. I decided to create a new profile and get that how I wanted (so i thought) yesterday. I went into a flight today and started to pop them out per my set up and half of the panels failed. I then noticed that my previous profile is gone... I can't find it in the app. I tried creating a new one today and would get them failing on pop out again. When I tried to do it without the pop out manager, the pop outs would disappear. Thoughts?

thanks

Can I use FSUIPC for just that binding and everything else in MSFS since it is already set up?

Can anyone tell me how to properly bind the Throttletek spolier lever? It is the only lever on the throttle I have not been able to get working in the Fenix. In 2020, I had it bound correctly to FSLabs but with the Fenix, I can't get it to bind in 2020 or 2024. I can arm the spoiler, but when I move the lever, it "twitches" for lack of better description. The arming and disarming just goes up and down. Any thoughts?

Thanks. Do you know how to remove the white title bars on the pop out? I thought there was a tab in the settings but I do t see it. Copilot seems to think I have the lite version but I didn’t see multiple versions to download

I was hoping I could get some help from you all. I asked copilot but that didn't help. I've recently been popping out panels and putting them on other displays for my home/desktop cockpit. I was doing it without any help from pop out manager until I ran into an issue. I somehow "lost" my Fenix ND on the captain side. When I do alt - right click nothing happens and it disappears. I did some reading and it seems that it is because it is going to an old location that isn't there anymore. My short fix is that I drag the ND from the first officer over to my side. The issue is, I have to use the FO FCU buttons. I tried using Pop Up Manager and thought that would be a fix, but that was the only display that kept failing when popping out. Any suggestions on a fix? If you need more info, let me know. Thanks

I didn't know that was an option. I'll check that out. Thanks

Right now I have Active Sky on with Atmos Core flying from KDTW-KORD. There are storms all in the vicinity of chicago but I don't see any storm clouds. It is one layer of overcast. Is that a MSFS/AS fault or are my setting off?

My specs are below. I run MSFS 2024 and currently have driver 591.86 installed. I was messing around and asked copilot based on my specs, what Nvidia driver should I be using and they said that the 3080ti's best choice for smoothness, etc would be 566.14. What do you all think about that? Am i doing a disservice using 591.x or is that better? Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive

So you guys are using a weather preset for Atmos Core and running Active Sky and don't have conflicts? What about weather force? What do you mean by "typical weather"? Are these weather presets or the other ones?