@Djije I know you have a problem. The number of Lvars is still too low. It should be at least 3000. This is a FSUIPC7 setup issue and nothing to do with LINDA.

Have you tired to set the additional FSUIPC7 setting as advised in the LINDA 4.1.4 download instructions.

Users are referred to the FSUIPC7 for Advanced Users documentation regarding the use of LvarScanDelay= entry for FSUIPC_WASM.INI file. A delay of 45-60 seconds is recommended. It may be necessary to Reload LUA Engine after a couple of minutes.

You should read the FSUIPC7 Advanced User documentation (pg 45/46).

Edited March 16, 20224 yr by ScotFlieger

@Djije The multiple errors you are recording in fsuipc7.log are caused by LINDA not loading the correct Event file (.EVT). Check that you have A32NX.EVT in your /FSUIPC7 folder. This file was included in the FBW_A320_v1_0_2a download.

Select LINDA Tracer and click on Events tab (top right). This should show A32NX.EVT listed and a list of events.

Edited March 16, 20224 yr by ScotFlieger

Thanks for your help, the A32NX.EVT was missing in the FSUIPC file.
now almost everything works on the FCU
the HDG/V/S FPA is not active, as well as the distance potentiometers and the other one next to it. is this normal?

@Djije One problem solved. One more to go.

All FCU knobs and buttons should work based on the config-mcp2a.lua configuration file you sent me. As previously pointed out, FSUIPC7/WASM/LINDA needs to see more than 1300 Lvars for FCU functions to work. If you are still only displaying around 1000 then your setup is incorrect. Guidance is provided in the LINDA 3.1.4 and FBW A32NX 1.0.2 module download posts for the extra actions users need to take to ensure that this all works.

One way to check for Lvars is to start MSFS with the aircraft ready to fly. Then start FSUIPC7, click Show followed Add-ons / WASM / List Lvars. If you open  the LINDA console you should see a numbered of all the found Lvars. This is recorded in FSUIPC7.LOG which you can send to me. If you don't see more around 1300, exit FSUIPC7 and LINDA and try again.

This is what I see on my LINDA Tracer page:

https://prnt.sc/XQGRkLKJoVsk

 

Everything is in order now!  i had to switch to the exp version to make the VRI fully operational.

Thanks for this last idea. Great work to all.

Edited March 25, 20224 yr by Djije

2 hours ago, Djije said:

Everything is in order now!  i had to switch to the exp version to make the VRI fully operational.

Thanks for this last idea. Great work to all.

It has been a struggle but I am glad we got you sorted. 

bonjour à vous, je cherche depuis 1 semaine pour faire fonctionner mon MCP2 avec linda, j'ai parcouru les forums avec pas mal de choses assez complexes, je peux vous dire le moyen le plus simple de brancher tout ça, j'insère les fichiers A32NX1 & 2 .evt à la racine de FSUIPC (actif), dans linda je n'ai que aicraft par défaut, ma scène de démarrage : client VRI / MSFS2020 / linda (attendez 60s) FSUIPC7, tout est vert (connecté) mais quand je clique sur le client (VRI) Fly Now .... rien, merci pour la procédure car j'ai du mal, cordialement

 

•  
• Quote

Hello,
I hace a question , i want use on my MSFS 2020 with the Fenix A320, a Vrinsight CDU (first generation) . It's possible with Linda to configure the CDU?

 

And if it's possible, what is the procedure? 

Thanks you for your answer.

Nicolas

 

MSFS 2020, WIN 10, Fenix A320. I7, 32Go Ram, 

Edited September 29, 20232 yr by Nicolas Cuquel

HI Nicolas

Personaly i have and oldest CDU1 and a new CDU2
So I use linda with my CDU2 
But if you consider that key are different 
CDU2KEYS for example ["LSKL1"]
CDU1Keys for example ["R4C0"]
if you do not want change nothing in Linda you could try to modifiy your config-cdu 2.lua with keys CDU1.

Kept the same name config-cdu 2.lua

also declare in Fsuipc.ini the right COM it is mine 
COM [VRInsight]
1=com3 "MCP COMBO"
2=com4 "CDU2"
3=com5 "CDU1"
I think that you do not change anything in Linda program but use CDU1 like CDU2. Sure andrew could give you an answer about it but it decided to stop not anormal becasue it as givent enormous about linda program
 

And SOLUTION which works for sure

If you do not find solution you can use your CDU1 with Fsuipc7 and Macro file very easy personaly i use with ECAM 

Here is a smal macro i put inside FCUIPC7 file

F320_ECAM.mcro
[Macros]
0=L:S_DISPLAY_ECAM_ND_XFR=SET         
1=L:A_DISPLAY_BRIGHTNESS_ECAM_U=SET         
2=L:A_DISPLAY_BRIGHTNESS_ECAM_L=SET        
3=L:S_ECAM_TO=SET         
4=L:S_ECAM_EMER_CANCEL=SET         
5=L:S_ECAM_EMER_CANCEL_Cover=SET         
6=L:S_ECAM_ENGINE=SET         
7=L:S_ECAM_BLEED=SET         
8=L:S_ECAM_CAB_PRESS=SET         
9=L:S_ECAM_ELEC=SET         
10=L:S_ECAM_HYD=SET         
11=L:S_ECAM_FUEL=SET         
12=L:S_ECAM_APU=SET         
13=L:S_ECAM_COND=SET         
14=L:S_ECAM_DOOR=SET         
15=L:S_ECAM_WHEEL=SET         
16=L:S_ECAM_FCTL=SET         
17=L:S_ECAM_ALL=SET         
18=L:S_ECAM_CLR_LEFT=SET         
19=L:S_ECAM_CLR_RIGHT=SET         
20=L:S_ECAM_STATUS=SET         
21=L:S_ECAM_RCL=SET         
22=L:I_ECAM_EMER_CANCEL=SET         
23=L:I_ECAM_APU=SET         
24=L:I_ECAM_BLEED=SET         
25=L:I_ECAM_CLR_LEFT=SET         
26=L:I_ECAM_CLR_RIGHT=SET         
27=L:I_ECAM_COND=SET         
28=L:I_ECAM_DOOR=SET         
29=L:I_ECAM_ELEC=SET         
30=L:I_ECAM_ENGINE=SET         
31=L:I_ECAM_FCTL=SET         
32=L:I_ECAM_FUEL=SET         
33=L:I_ECAM_HYD=SET         
34=L:I_ECAM_CAB_PRESS=SET         
35=L:I_ECAM_STATUS=SET         
36=L:I_ECAM_WHEEL=SET

You can recopy it and put in notepad++     

It works so you could easily use the same Macro with your CDU2 without use linda.
like this
F320_CDU2.mcro
[Macros]
1=L:S_CDU2_KEY_DIR=SET
2=L:S_CDU2_KEY_PROG=SET
3=L:S_CDU2_KEY_PERF=SET
4=L:S_CDU2_KEY_INIT=SET
5=L:S_CDU2_KEY_DATA=SET
6=L:S_CDU2_KEY_FPLN=SET
7=L:S_CDU2_KEY_RAD_NAV=SET
8=L:S_CDU2_KEY_FUEL=SET
9=L:S_CDU2_KEY_SEC=SET
10=L:S_CDU2_KEY_ATC_COM=SET
11=L:S_CDU2_KEY_MENU=SET
12=L:S_CDU2_KEY_AIRPORT=SET
13=L:S_CDU2_KEY_ARROW_UP=SET
14=L:S_CDU2_KEY_ARROW_DOWN=SET
15=L:S_CDU2_KEY_PREVPAGE=SET
16=L:S_CDU2_KEY_NEXTPAGE=SET
17=L:S_CDU2_KEY_DOT=SET
18=L:S_CDU2_KEY_MINUS=SET
19=L:S_CDU2_KEY_SPACE=SET
20=L:S_CDU2_KEY_SLASH=SET
21=L:S_CDU2_KEY_OVFLY=SET
22=L:S_CDU2_KEY_CLEAR=SET
23=L:S_CDU2_KEY_DEL=SET
24=L:S_CDU2_KEY_LSK1L=SET
25=L:S_CDU2_KEY_LSK2L=SET
26=L:S_CDU2_KEY_LSK3L=SET
27=L:S_CDU2_KEY_LSK4L=SET
28=L:S_CDU2_KEY_LSK5L=SET
29=L:S_CDU2_KEY_LSK6L=SET
30=L:S_CDU2_KEY_LSK1R=SET
31=L:S_CDU2_KEY_LSK2R=SET
32=L:S_CDU2_KEY_LSK3R=SET
33=L:S_CDU2_KEY_LSK4R=SET
34=L:S_CDU2_KEY_LSK5R=SET
35=L:S_CDU2_KEY_LSK6R=SET
36=L:S_CDU2_KEY_A=SET
37=L:S_CDU2_KEY_B=SET
38=L:S_CDU2_KEY_C=SET
39=L:S_CDU2_KEY_D=SET
40=L:S_CDU2_KEY_E=SET
41=L:S_CDU2_KEY_F=SET
42=L:S_CDU2_KEY_G=SET
43=L:S_CDU2_KEY_H=SET
44=L:S_CDU2_KEY_I=SET
45=L:S_CDU2_KEY_J=SET
46=L:S_CDU2_KEY_K=SET
47=L:S_CDU2_KEY_L=SET
48=L:S_CDU2_KEY_M=SET
49=L:S_CDU2_KEY_N=SET
50=L:S_CDU2_KEY_O=SET
51=L:S_CDU2_KEY_P=SET
52=L:S_CDU2_KEY_Q=SET
53=L:S_CDU2_KEY_R=SET
54=L:S_CDU2_KEY_S=SET
55=L:S_CDU2_KEY_T=SET
56=L:S_CDU2_KEY_U=SET
57=L:S_CDU2_KEY_V=SET
58=L:S_CDU2_KEY_W=SET
59=L:S_CDU2_KEY_X=SET
60=L:S_CDU2_KEY_Y=SET
61=L:S_CDU2_KEY_Z=SET
62=L:S_CDU2_KEY_1=SET
63=L:S_CDU2_KEY_2=SET
64=L:S_CDU2_KEY_3=SET
65=L:S_CDU2_KEY_4=SET
66=L:S_CDU2_KEY_5=SET
67=L:S_CDU2_KEY_6=SET
68=L:S_CDU2_KEY_7=SET
69=L:S_CDU2_KEY_8=SET
70=L:S_CDU2_KEY_9=SET
71=L:S_CDU2_KEY_0=SET
72=L:S_CDU2_KEY_ARROW_LEFT=SET
73=L:S_CDU2_KEY_ARROW_RIGHT=SET

  and you assigned every buttons of your CDU1 

try it 
if you want more help do not hesitate send me a personal message and we could discuss about it;

Regards from France

Maclaw