January 22, 20233 yr Hi guys, after updating to the latest MCE is driving me crazy. Everytime when the Fenix A320 (set as default) has completely loaded up, fed with all data and ready to go I start MCE. It automatically arms spoilers for any reason, initialisation progress continues and steps back to MSFS2020 option page. Everytime it is said that it can only be working correctly after a restart of the flight. Shutdown of MCE and flight reloaded. Done. Same message pops up again and again and MCE is not working. Has worked under previous build number! MCE is set to admin mode and everything is on latest. Just gave another try with re-installed FSUIPC registered but not running. CTD Any ideas out there? LH067U Edited January 22, 20233 yr by LH067U
January 22, 20233 yr Commercial Member 1 hour ago, LH067U said: Hi guys, after updating to the latest MCE is driving me crazy. Everytime when the Fenix A320 (set as default) has completely loaded up, fed with all data and ready to go I start MCE. It automatically arms spoilers for any reason, initialisation progress continues and steps back to MSFS2020 option page. Everytime it is said that it can only be working correctly after a restart of the flight. Shutdown of MCE and flight reloaded. Done. Same message pops up again and again and MCE is not working. Has worked under previous build number! MCE is set to admin mode and everything is on latest. Just gave another try with re-installed FSUIPC registered but not running. CTD Any ideas out there? LH067U I assume you are running the latest Fenix release. Just make sure.... - The Fenix A320 is set as the plane that MSFS loads on startup - You haven't deleted <fsuipc-lvar-module> in \Community\ folder by accident. Eventually, just re-install MCE - Un case it has to do with some odd livery, try it our with Fenix livery first. Guaranteed to work. Fo will not just handle almost every switch, but also dial everything, including FCU SPS, HDG, ALT, VS, radios, something that you won't get in other packages. Gerald R https://www.multicrewxp.com
January 23, 20233 yr Author 19 hours ago, FS++ said: I assume you are running the latest Fenix release. Just make sure.... - The Fenix A320 is set as the plane that MSFS loads on startup - You haven't deleted <fsuipc-lvar-module> in \Community\ folder by accident. Eventually, just re-install MCE - Un case it has to do with some odd livery, try it our with Fenix livery first. Guaranteed to work. Fo will not just handle almost every switch, but also dial everything, including FCU SPS, HDG, ALT, VS, radios, something that you won't get in other packages. Fenix is default aircraft on startup with default livery Re-installed MCE with version 3.0.20 Same pop up appears again and again. MCE not working. Tried spawning at gate or active runway. No chance to get it working properly.
January 23, 20233 yr Commercial Member 1 hour ago, LH067U said: Fenix is default aircraft on startup with default livery Re-installed MCE with version 3.0.20 Same pop up appears again and again. MCE not working. Tried spawning at gate or active runway. No chance to get it working properly. Once it hasn't connected, go to C:\Users\your_user_name\Appdata\Roaming\Multi Crew Experience\ folder and send "Simco64_Ldr.log" to support e-mail Thanks Gerald R https://www.multicrewxp.com
January 24, 20233 yr Commercial Member On 1/22/2023 at 6:34 PM, LH067U said: Hi guys, after updating to the latest MCE is driving me crazy. Everytime when the Fenix A320 (set as default) has completely loaded up, fed with all data and ready to go I start MCE. It automatically arms spoilers for any reason, initialisation progress continues and steps back to MSFS2020 option page. Everytime it is said that it can only be working correctly after a restart of the flight. Shutdown of MCE and flight reloaded. Done. Same message pops up again and again and MCE is not working. Has worked under previous build number! MCE is set to admin mode and everything is on latest. Just gave another try with re-installed FSUIPC registered but not running. CTD Any ideas out there? LH067U Not sure whether it was you "Gu***v*" who reported same issue via e-mail. It appears, there was a subtle bug in one of the files that would occsionally manifest itself under specific conditions. Something to do with some changes made recently to ensure MCE identifies the MSFS main window correctly and not be fooled by other multi-monitor windows that are of the same type. To cut a long story short, download this file, unzip and replace "Simco64_Ldr.exe" http://www.multicrewxp.com/Simco64_ldr.zip Since we now have aircraft specific packages, among them Multi Crew Fenix A320, they wouldn't have the most recent file (to support more planes) which could have triggered a wave of reports. Please understand that while more planes are integrated and features are added, episodes like this one may happen from time to time. It's not practical to test every supported plane against every deemed minor MCE update. Users just need to notify us and we will know exactly where to look. Thank you for prompting to look at it. Gerald R https://www.multicrewxp.com
January 24, 20233 yr Hope I am not straying into unwelcome waters with my query, so here goes: I purchased MCE many years ago and, since MSFS, I have not loaded, much less used, the software. Could you please identify if an upgraded package; all aircraft please, is available and hence, what I am required to purchase. Many thanks. BR. Maurice. Very Best Wishes, Dr T. Maurice Murphy
January 24, 20233 yr Commercial Member 4 hours ago, Paladin said: Hope I am not straying into unwelcome waters with my query, so here goes: I purchased MCE many years ago and, since MSFS, I have not loaded, much less used, the software. Could you please identify if an upgraded package; all aircraft please, is available and hence, what I am required to purchase. Many thanks. BR. Maurice. Would have preferred a separate thread for this query, but it's OK If you have the Ultimate Edition and assuming you still have valid purchase details, you do qualify for the free update that supports complex airplanes in MSFS.Just download the latest Barring that, we do offer a new package called "Multi Crew MSFS Edition" which currently supports 5 complex planes (not counting default ASOBO planes) and will support more over the years (Maddog, BAE145 and later PMDG 777 & 747 just to name a few). There are now aircraft specific packages that you can purchase for a very low cost if you only have interest in a couple of planes. Multi Crew Fenix A320 Multi Crew PMDG 737 Multi Crew FlyByWire A320 Multi Crew Aerosoft CRJ All the above also include button control Edited January 24, 20233 yr by FS++ typos Gerald R https://www.multicrewxp.com
January 24, 20233 yr Author 4 hours ago, FS++ said: Not sure whether it was you "Gu***v*" who reported same issue via e-mail. It appears, there was a subtle bug in one of the files that would occsionally manifest itself under specific conditions. Something to do with some changes made recently to ensure MCE identifies the MSFS main window correctly and not be fooled by other multi-monitor windows that are of the same type. To cut a long story short, download this file, unzip and replace "Simco64_Ldr.exe" http://www.multicrewxp.com/Simco64_ldr.zip Since we now have aircraft specific packages, among them Multi Crew Fenix A320, they wouldn't have the most recent file (to support more planes) which could have triggered a wave of reports. Please understand that while more planes are integrated and features are added, episodes like this one may happen from time to time. It's not practical to test every supported plane against every deemed minor MCE update. Users just need to notify us and we will know exactly where to look. Thank you for prompting to look at it. Many thanks. The Simco64_Ldr.exe was the game changer. Now everything is fine again. I hope that a future update will run fine as well. Thanks for your brilliant support LH067U
Archived
This topic is now archived and is closed to further replies.