December 18, 20232 yr I have this issue with both GTN and GNS, but I'm posting here because the GNS is the unit that is currently installed on the plane. Ok, Alabeo Saratoga TC P3D5. When I enter a flightplan or just a Direct To leg, the CDI is in GPS mode, when I hit NAV, the AP will turn due North and continue in that direction. As I said, this is with the GTN unit and the GNS unit, I'm using HDG mode to get to the path and no matter where I'm at in relation to it, either on it, just left or just right, hit the NAV button and it turns to 360/00 Degrees, due North. I installed the GNS using the Alabeo/Carenado installer and then adding the unit(s) with the RXP installer in the Sim. Jason Fitch Flying Tigers Group Historic Airline Group
December 18, 20232 yr Have you run the updater to the latest version of the RXP? This is a symptom of an out-of-date RXP version. David Porrett
December 18, 20232 yr Author Ok....Updated both....New issue. Using the GNS and the Saratoga. I have the 530 and the 430 both onboard.....However, the AP only seems to be connected to the 430....Which makes me think I've gotten a setting wrong somewhere....But for the life of me, I can't figure out what.. Jason Fitch Flying Tigers Group Historic Airline Group
December 18, 20232 yr This is my RealityXP.GNS file for the Realair Turbine Duke that uses a 530/430 with the 530 driving the autopilot. Pay attention to the "MasterDevice" entry and I suggest ensuring that it is set to "True" for the 530 and "False" for the 430. Spoiler [GNS_530_1] ; show screen only gauge if true. nobezel = true ; is the master device if true. MasterDevice = true ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 usealtmouse = true ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = LinkCrs = true LinkObs = true [GNS_530_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = 15531 ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 [GNS_430_1] ; is the master device if true. MasterDevice = false ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = [GNS_430_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = 15432 ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 [GNS_430_2] ; is the master device if true. MasterDevice = false ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GNS_430_2.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 Edited December 18, 20232 yr by DavidP David Porrett
December 19, 20232 yr Author On 12/18/2023 at 5:09 AM, DavidP said: This is my RealityXP.GNS file for the Realair Turbine Duke that uses a 530/430 with the 530 driving the autopilot. Pay attention to the "MasterDevice" entry and I suggest ensuring that it is set to "True" for the 530 and "False" for the 430. Reveal hidden contents [GNS_530_1] ; show screen only gauge if true. nobezel = true ; is the master device if true. MasterDevice = true ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 usealtmouse = true ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = LinkCrs = true LinkObs = true [GNS_530_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = 15531 ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 [GNS_430_1] ; is the master device if true. MasterDevice = false ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = [GNS_430_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = 15432 ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 [GNS_430_2] ; is the master device if true. MasterDevice = false ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GNS_430_2.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 This was it!, Thank you! Jason Fitch Flying Tigers Group Historic Airline Group
Archived
This topic is now archived and is closed to further replies.