July 20, 20241 yr Commercial Member 2 hours ago, Crazyfool said: Tried a fresh ini & also just off the cuff decided to uninstall 777 and reinstall, no joy so far. Not to worry i suppose ill have to just make do with out it. Again really appreciate The help. Here is my options.ini: https://www.dropbox.com/scl/fi/21qnijebxyjjwzln46ubu/777_Options.zip?rlkey=yqn6z8vlaqycq981rqv4lhdpm&dl=0 It is located here (Microsoft Store version of MSFS): C:\Users\...\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\pmdg-aircraft-77w\work Another question: where exactly are you trying to display the FMC? Did you try it on the local computer too? For example (to my best knowledge) older iPads cannot display HTML5. Then again, your wouldn't see the 737 FMC either. Edited July 20, 20241 yr by Lorby_SI LORBY-SI
July 21, 20241 yr Author Yep thats the file path for sure, and tried both locally & remotely different browsers ie edge/ chrome, even tried safari still no joy.
July 21, 20241 yr Commercial Member 49 minutes ago, Crazyfool said: Yep thats the file path for sure, and tried both locally & remotely different browsers ie edge/ chrome, even tried safari still no joy. Did you use my file? That would eliminate the ini as a cause. And recheck those scripts: "_CDU" is One Shot, Beginning, "_Data" is Repeating 200ms. Also, are you familiar with the developer tools in your browser? Can you check if the screen contents are actually not there or just not visible (=turn up the brightness on the CDU?) Edited July 21, 20241 yr by Lorby_SI LORBY-SI
July 21, 20241 yr Commercial Member Btw, the first screen of the WebFMC is the CDU selection (when using the index.html), an image of the CDU with the Left/Right/Center on it. Don't you see even that? LORBY-SI
July 21, 20241 yr Author Sorry should have mentioned it earlier that was using Your Ini file, Rechecked the scripts as described above. No sorry in regards to dev tools on the net havent got a clue. all i see are numbers and letters lol. i do see the left right and centre option as soon as i press any i am presented with a blank screen
July 21, 20241 yr Commercial Member 17 minutes ago, Crazyfool said: Sorry should have mentioned it earlier that was using Your Ini file, Rechecked the scripts as described above. No sorry in regards to dev tools on the net havent got a clue. all i see are numbers and letters lol. i do see the left right and centre option as soon as i press any i am presented with a blank screen Any other addons or simulator modifications that could interfere? For example, something GUI or network related, that could block the data transmission from within the sim? What happens when you assing the 737s CDU script as autoscript instead? But - this is highly irregular. There must be a reason, although it makes absolutely no sense, as the mechanism provided by PMDG is the same as with the 737. Also, it seems to work for everybody else. If you want, send me the AAO log files to the support address (last page of the AAO manual). Make sure to include your proof of purchase. Edited July 21, 20241 yr by Lorby_SI LORBY-SI
July 21, 20241 yr Author Sorry should have 2 minutes ago, Lorby_SI said: Any other addons or simulator modifications that could interfere? For example, something GUI or network related, that could block the data transmission from within the sim? What happens when you assing the 737s CDU script as autoscript instead? But - this is highly irregular. There must be a reason, although it makes absolutely no sense. It seems to work for everybody else. If you want, send me the AAO log files to the support address (last page of the AAO manual). Make sure to include your proof of purchase. Literally currently running is the sim and AAO nothing else so no programme should be interefering. The 737 Works just fine(might i Add that i am using Pilznilles Version) so dont know if that has anything to do with it albeit it is more or less the same process for setup just an different aircraft. Just out of curiousity which log file The statup one?
July 21, 20241 yr Commercial Member 18 minutes ago, Crazyfool said: Just out of curiousity which log file The statup one? Startup and the one where the timestamp corresponds to an attempt at using the 777 CDU. I meant using the 737 scipt for the 777... straws, I know. LORBY-SI
July 21, 20241 yr Author Right appreciate all the help but i think i have narrowed it down, to a conflict between the 737 & 777, i have removed the 737 script and it loads up straight away. i will just have to add an aircraft script each time i change
July 21, 20241 yr Author 18 minutes ago, Crazyfool said: Right appreciate all the help but i think i have narrowed it down, to a conflict between the 737 & 777, i have removed the 737 script and it loads up straight away. i will just have to add an aircraft script each time i change No Need just running the 777 scripts seems to work with the 737 too.
July 21, 20241 yr Commercial Member 53 minutes ago, Crazyfool said: No Need just running the 777 scripts seems to work with the 737 too. ?? I'm sorry, but I don't understand. What exactly is happening how and where? In your screenshots I only saw the 777 Data and CDU scripts as autoscripts? Which is how it is supposed to be? The 777 and 737 Data/CDU scripts cannot (never) be operated at the same time. But when they are assigned as aircraft automated scripts to each separate model, they won't. Right? They cannot be used as Global automated scripts. Edited July 21, 20241 yr by Lorby_SI LORBY-SI
July 21, 20241 yr Author 3 minutes ago, Lorby_SI said: ?? I'm sorry, but I don't understand. What exactly is happening how and where? In your screenshots I only saw the 777 Data and CDU scripts as autoscripts? 777 and 737 Data and CDU script cannot be operated at the same time, but when they are assigned as aircraft automated scripts to each separate model, they won't. Right? Sorry if i have confused You, i have the fms/cdu running i deleted the 737 global aircraft script, and the 777 fms started working. with only the 777 aircraft automated script in AAO i loaded up the 737 and the fms worked for that too again with only the 777 script in AAO. the 737 and 777 werent operated at the same time. i attempted to assign the aircraft specific scripts but i wasnt having any joy. Overall they are both working and i am not about to complain.
July 21, 20241 yr Commercial Member 3 minutes ago, Crazyfool said: 737 and 777 werent operated at the same time. If one was a global script, then they were both active at the same time. And that was your problem. Both Data and CDU have to be assigned as Aircraft Automated Scripts to each appropriate airplane model. You cannot use them as Global autoscripts, that is very wrong. Edited July 21, 20241 yr by Lorby_SI LORBY-SI
July 21, 20241 yr Author 7 minutes ago, Lorby_SI said: If one was a global script, then they were both active at the same time. And that was your problem. Both Data and CDU have to be assigned as Aircraft Automated Scripts to each appropriate airplane model. You cannot use them as Global autoscripts, that is very wrong. yeah thats how the instructions were set for the 737 scripts didnt realise that till today.
July 21, 20241 yr Commercial Member 9 minutes ago, Crazyfool said: yeah thats how the instructions were set for the 737 scripts didnt realise that till today. Not to worry, thank you for pointing it out. Some other thing that people can get wrong to be kept in mind. LORBY-SI
Create an account or sign in to comment