April 30, 20251 yr Nico; I have traffic injection radius set to 6nm and max live set to 0 to get parked acft with no live movements per your directions in another thread. I manually set the destination in the GUI. At some point during the flight, PSXT is automatically resetting traffic injection to auto range, and max live to -1, resulting in live traffic appearing during arrival. I'm using historical weather so the runway(s) in use by the RT live traffic feed conflicts from the runway(s) in use based on historical wx conditions, hence the need to disable live traffic movements (e.g. to avoid going nose-to-nose with departures during approach). How do I stop that from happening? Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
April 30, 20251 yr 2 hours ago, Bob Scott said: At some point during the flight, PSXT is automatically resetting traffic injection to auto range, and max live to -1, resulting in live traffic appearing during arrival. How do I stop that from happening? That's probably because you came in the reach of an airport. The airport file was loaded, and the auto range and max live settings were taken from your learned airport file, synchronising with the values you had the last time you were at that airport. To stop that, change the settings in the GUI while you are at that airport, or edit the parameters in the Learned file in \airports\learned\thirdparty\<publisher>\ICAO.xml <parameter name="LATERAL_RANGE" value="6" /> <parameter name="AUTO_RANGE" value="false" /> <parameter name="MAX_LIVE" value="0" /> Note if The MAX_LIVE parameter is not in the file it means -1 (not being used)
Create an account or sign in to comment