August 11, 2025Aug 11 https://imgur.com/a/CPkl40O I get this error. Note that while I selected 2024, it still stays in 2020
August 11, 2025Aug 11 1 hour ago, JDiercks said: https://imgur.com/a/CPkl40O That's a problem in your liveries... Did you add new liveries lately? One of them has a character in it that is not Unicode. Try to restrict your search for parts of your liveries to see where it is in. 1 hour ago, JDiercks said: I get this error. Note that while I selected 2024, it still stays in 2020 That's because it has halted in the search for liveries in 2024, and it did not reach the point where it changes the upper part of the GUI, so no problem.
August 11, 2025Aug 11 Author 55 minutes ago, kiek said: That's a problem in your liveries... Did you add new liveries lately? One of them has a character in it that is not Unicode. Try to restrict your search for parts of your liveries to see where it is in. That's because it has halted in the search for liveries in 2024, and it did not reach the point where it changes the upper part of the GUI, so no problem. Ah okay! I use FSLTL, I will check
August 11, 2025Aug 11 Author The problem is that whenever I put a path within my community (to check where the unicode fail aprt is), it says that is not path to community. So how can I check best..
August 11, 2025Aug 11 42 minutes ago, JDiercks said: The problem is that whenever I put a path within my community (to check where the unicode fail aprt is), it says that is not path to community. So how can I check best.. You must not change the path to community. You must divide the AI content in two roughly the same parts, then test one part etc. if found the part with the error, divide that part too etc.. Note it is likely to be a strange code in comments fields. You could do a "dry" scan, just review the code. Edited August 11, 2025Aug 11 by kiek
August 11, 2025Aug 11 Author 57 minutes ago, kiek said: You must not change the path to community. You must divide the AI content in two roughly the same parts, then test one part etc. if found the part with the error, divide that part too etc.. Note it is likely to be a strange code in comments fields. You could do a "dry" scan, just review the code. Thank you. With that you simply mean Getting the whole fsltl model out my community folder and then gradually putting it back?
August 11, 2025Aug 11 Author https://imgur.com/a/jftmIpp with only these 4 in my FSLTL map in community, I still get the error
August 11, 2025Aug 11 1 hour ago, JDiercks said: https://imgur.com/a/jftmIpp with only these 4 in my FSLTL map in community, I still get the error Then it must be in there... Easy. Delete these and re-install the rest.
August 11, 2025Aug 11 Author Tried deleting those, reinstalled the rest. Is there an easy way to debug where it is without constantly moving gigabytes of data over?
August 11, 2025Aug 11 12 hours ago, JDiercks said: Tried deleting those, reinstalled the rest. Is there an easy way to debug where it is without constantly moving gigabytes of data over? Not that I know off. But when you stick to the same drive, moving data is blazing fast. Edited August 12, 2025Aug 12 by kiek
August 11, 2025Aug 11 Author https://imgur.com/a/jftmIpp I dont understand anything of this. Even when making the fsltl-base folder empty or even completely deleting it, I get the error as showed in the screenshots
August 12, 2025Aug 12 Don't post screenshots pls. Post your Log.txt. All info is in there, and much more readable. And , since 11.4.0, you can set the Selector at FSLTL only. EDIT: re-download 11.4.0, I've put in some more tests. Edited August 12, 2025Aug 12 by kiek
August 12, 2025Aug 12 Author 2 hours ago, kiek said: Don't post screenshots pls. Post your Log.txt. All info is in there, and much more readable. And , since 11.4.0, you can set the Selector at FSLTL only. EDIT: re-download 11.4.0, I've put in some more tests. Thanks for the update, appreciate it. The first one is the log withoug having FSLTL installed, the second one with it installed. Both gives the error Quote Tue Aug 12 09:28:39 2025 (utc) PSXT version 11.4.0 for MSFS 2020/2024 ********************************** parameters ********************************** from 'C:\Users\jespe\AppData\Roaming\PSXT\parameters.xml' MSFS_2020=false SIM_TIME=false KEEP_SIM_TIME_PAR=false RT_PARKTRAFFIC_ONLY=false COLLISION_USER_AIR=true COLLISION_USER_GND=true COLLISION_LIVE_PARKED_GND=false SUPPRESS_STUB=false LOG=true ALWAYS_ON_TOP=false SCAN_LIVERIES=true LIG_AUTOMATIC=true LIG_PRIORITIZE=true AIRBORNE_ONLY=false SCAN_AIRPORTS=true LIGHT_AIRCRAFT=true HELICOPTERS=true HIGH_PERF_AIRCRAFT=true NAV_LIGHTS_WHILE_PARKED=true AUTO_RANGE=true LEARN_SOFT=true STRAIGHT_PBS_ONLY=false PARK_SOFT=true PARK_FAKE=false WEEK=false INITIAL_LOAD_ONLY=false GUID_CHANGES=true CUSTOM_PARKING_PERCENTAGE=-1 MAIN_WINDOW_X=28 MAIN_WINDOW_Y=216 LATERAL_RANGE=40 AIRPORT_RANGE=20 AUTO_RANGE_ABOVE_HEIGHT=49000 AIRP_HEIGHT=18000 LAST_EPOCH_TIME:=0 HOLDING_THRESHOLD_METERS=250 MAX_HOLDING_MINUTES=20 CUSTOM_MAX_PARK=-1 MAX_LIVE=-1 AI_PACKAGE_ORDER=1 MATCHING_DEPTH=4 RANGE=40 MAX_FIT=47 GetDlgItem failed for ID 32853 AR_ABOVE_HEIGHT=48000 MAX_PARK_SEL=500 MAX_LIVE_SEL=500 AIRP_RANGE=20 AIRP_HEIGHT=18000 TIME_SHIFT_DAYS=0 TIME_SHIFT_HOURS=0 TIME_SHIFT_MINS=0 PROGRAM_VERSION="11.3.0" MSFS_INSTALL_PATH="" PROGRAM_INSTALL_PATH="S:\PSXT" AIG_VERSION="1.0.4" DBASE_VERSION="1.1.5" AIRPORTS_VERSION="1.0.1" MYSIMADDON24_VERSION="" MSFS_2024_INSTALL_PATH="C:\Users\jespe\AppData\Local\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\Packages" AI_PACKAGE_SELECTOR="AIG, FSLTL, JF" DESTINATION="" BLOCK_CALLSIGN="" SIM_CHOICE="MSFS 2024" 'C:\Users\jespe\AppData\Roaming\PSXT\parameters.xml' saved ******************************************************************************** PROGRAM_VERSION="11.4.0" This is a version update from 11.3.0 -> 11.4.0 S:\PSXT SCAN_LIVERIES=true SCAN_AIRPORTS=true Your RealTraffic license was taken from 'RealTraffic.lic' msfs version up-to-date airports version up-to-date aig version up-to-date dbase version up-to-date PROGRAM_INSTALL_PATH="S:\PSXT" 619 publishers read 54326 dbase records read 37268 airports read ++++++++++++++++++++++++ liveries scan automatic starts ++++++++++++++++++++++++++++++++ Error No mapping for the Unicode character exists in the target multi-byte code page. Exiting: SYSTEM ERROR Tue Aug 12 09:29:34 2025 Quote Tue Aug 12 09:49:05 2025 (utc) PSXT version 11.4.0 for MSFS 2020/2024 ********************************** parameters ********************************** from 'C:\Users\jespe\AppData\Roaming\PSXT\parameters.xml' MSFS_2020=false SIM_TIME=false KEEP_SIM_TIME_PAR=false RT_PARKTRAFFIC_ONLY=false COLLISION_USER_AIR=true COLLISION_USER_GND=true COLLISION_LIVE_PARKED_GND=false SUPPRESS_STUB=false LOG=true ALWAYS_ON_TOP=false SCAN_LIVERIES=true LIG_AUTOMATIC=true LIG_PRIORITIZE=true AIRBORNE_ONLY=false SCAN_AIRPORTS=true LIGHT_AIRCRAFT=true HELICOPTERS=true HIGH_PERF_AIRCRAFT=true NAV_LIGHTS_WHILE_PARKED=true AUTO_RANGE=true LEARN_SOFT=true STRAIGHT_PBS_ONLY=false PARK_SOFT=true PARK_FAKE=false WEEK=false INITIAL_LOAD_ONLY=false GUID_CHANGES=true CUSTOM_PARKING_PERCENTAGE=-1 MAIN_WINDOW_X=28 MAIN_WINDOW_Y=216 LATERAL_RANGE=40 AIRPORT_RANGE=20 AUTO_RANGE_ABOVE_HEIGHT=49000 AIRP_HEIGHT=18000 LAST_EPOCH_TIME:=0 HOLDING_THRESHOLD_METERS=250 MAX_HOLDING_MINUTES=20 CUSTOM_MAX_PARK=-1 MAX_LIVE=-1 AI_PACKAGE_ORDER=1 MATCHING_DEPTH=4 RANGE=40 MAX_FIT=47 GetDlgItem failed for ID 32853 AR_ABOVE_HEIGHT=48000 MAX_PARK_SEL=500 MAX_LIVE_SEL=500 AIRP_RANGE=20 AIRP_HEIGHT=18000 TIME_SHIFT_DAYS=0 TIME_SHIFT_HOURS=0 TIME_SHIFT_MINS=0 PROGRAM_VERSION="11.4.0" MSFS_INSTALL_PATH="" PROGRAM_INSTALL_PATH="S:\PSXT" AIG_VERSION="1.0.4" DBASE_VERSION="1.1.5" AIRPORTS_VERSION="1.0.1" MYSIMADDON24_VERSION="" MSFS_2024_INSTALL_PATH="C:\Users\jespe\AppData\Local\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\Packages" AI_PACKAGE_SELECTOR="FSLTL" DESTINATION="" BLOCK_CALLSIGN="" SIM_CHOICE="MSFS 2024" 'C:\Users\jespe\AppData\Roaming\PSXT\parameters.xml' saved ******************************************************************************** Your RealTraffic license was taken from 'RealTraffic.lic' msfs version up-to-date airports version up-to-date aig version up-to-date dbase version up-to-date PROGRAM_INSTALL_PATH="S:\PSXT" 619 publishers read 54326 dbase records read 37268 airports read ++++++++++++++++++++++++ liveries scan automatic starts ++++++++++++++++++++++++++++++++ Automatic FSLTL scan found folder: 'C:\Users\jespe\AppData\Local\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\Packages\Community\fsltl-traffic-base' Error No mapping for the Unicode character exists in the target multi-byte code page. Exiting: SYSTEM ERROR
August 12, 2025Aug 12 THx. Could you download this PSXT.exe and replace yours. See if it makes a difference. Nico
August 12, 2025Aug 12 Author 1 minute ago, kiek said: THx. Could you download this PSXT.exe and replace yours. See if it makes a difference. Nico Thansk for the help. Still the same. Quote Tue Aug 12 12:16:09 2025 (utc) PSXT version 11.4.0 for MSFS 2020/2024 ********************************** parameters ********************************** from 'C:\Users\jespe\AppData\Roaming\PSXT\parameters.xml' MSFS_2020=false SIM_TIME=false KEEP_SIM_TIME_PAR=false RT_PARKTRAFFIC_ONLY=false COLLISION_USER_AIR=true COLLISION_USER_GND=true COLLISION_LIVE_PARKED_GND=false SUPPRESS_STUB=false LOG=true ALWAYS_ON_TOP=false SCAN_LIVERIES=true LIG_AUTOMATIC=true LIG_PRIORITIZE=true AIRBORNE_ONLY=false SCAN_AIRPORTS=true LIGHT_AIRCRAFT=true HELICOPTERS=true HIGH_PERF_AIRCRAFT=true NAV_LIGHTS_WHILE_PARKED=true AUTO_RANGE=true LEARN_SOFT=true STRAIGHT_PBS_ONLY=false PARK_SOFT=true PARK_FAKE=false WEEK=false INITIAL_LOAD_ONLY=false GUID_CHANGES=true CUSTOM_PARKING_PERCENTAGE=-1 MAIN_WINDOW_X=28 MAIN_WINDOW_Y=216 LATERAL_RANGE=40 AIRPORT_RANGE=20 AUTO_RANGE_ABOVE_HEIGHT=49000 AIRP_HEIGHT=18000 LAST_EPOCH_TIME:=0 HOLDING_THRESHOLD_METERS=250 MAX_HOLDING_MINUTES=20 CUSTOM_MAX_PARK=-1 MAX_LIVE=-1 AI_PACKAGE_ORDER=1 MATCHING_DEPTH=4 RANGE=40 MAX_FIT=47 GetDlgItem failed for ID 32853 AR_ABOVE_HEIGHT=48000 MAX_PARK_SEL=500 MAX_LIVE_SEL=500 AIRP_RANGE=20 AIRP_HEIGHT=18000 TIME_SHIFT_DAYS=0 TIME_SHIFT_HOURS=0 TIME_SHIFT_MINS=0 PROGRAM_VERSION="11.4.0" MSFS_INSTALL_PATH="" PROGRAM_INSTALL_PATH="S:\PSXT" AIG_VERSION="1.0.4" DBASE_VERSION="1.1.6" AIRPORTS_VERSION="1.0.1" MYSIMADDON24_VERSION="" MSFS_2024_INSTALL_PATH="C:\Users\jespe\AppData\Local\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\Packages" AI_PACKAGE_SELECTOR="FSLTL" DESTINATION="" BLOCK_CALLSIGN="" SIM_CHOICE="MSFS 2024" 'C:\Users\jespe\AppData\Roaming\PSXT\parameters.xml' saved ******************************************************************************** Your RealTraffic license was taken from 'RealTraffic.lic' msfs version up-to-date airports version up-to-date aig version up-to-date dbase version up-to-date PROGRAM_INSTALL_PATH="S:\PSXT" 619 publishers read 54326 dbase records read 37268 airports read ++++++++++++++++++++++++ liveries scan automatic starts ++++++++++++++++++++++++++++++++ Automatic FSLTL scan found folder: 'C:\Users\jespe\AppData\Local\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\Packages\Community\fsltl-traffic-base' Error No mapping for the Unicode character exists in the target multi-byte code page. Exiting: SYSTEM ERROR Tue Aug 12 12:16:12 2025
Create an account or sign in to comment