Spotty26 users can update via Spotty26's Menu\Check for update

Changelog v1.5.0 > v1.5.1

✅ Further improvements of Traffic Board features.

✅ Auto View Landing and Takeoff should now work after implemented new codes.

✅ Fixed issues for user that are not using the FSLTL Traffic injector - Traffic Board with limited feature should now work.

Spotty26 continues its journey toward becoming a **must-have utility for every MSFS 2024 flyer**, whether you're into plane spotting, cinematic flybys, AI traffic tracking, or simply enjoying the world from the perfect camera angle.

As always, feedback and suggestions are welcome. Enjoy the update and happy flybys and aircraft spotting! ✈️

Working just fine. Good to have the missing Flyby camera in MSFS 2024. Checking out AI aircraft traffic is no very easy both from the map and the new TrafficBoard.

Edited Thursday at 11:02 AM2 days by Cap737Delta

On 6/21/2026 at 10:37 AM, rksoftware said:

As always, feedback and suggestions are welcome. Enjoy the update and happy flybys and aircraft spotting! ✈️

Hello, I'm wondering about something. I just started playing with Tower Views and while it's working as it should I'm puzzled why when I place a tower view on the map it's not being saved between sessions. In other words, I have to re-set them up each time up. Am I missing something?

You need to save the Tower/Spotter location. Then on next session when Tower/Spotter camera is active you click on a saved Tower/Spotter marker on the map.

You can save a Tower/Spotter camera location at any location in the world.

Edited Thursday at 03:23 PM2 days by Cap737Delta

1 hour ago, Cap737Delta said:

You need to save the Tower/Spotter location.

I right click on the map to set the location of the tower in question. I set its height. I type in a name, and click the SAVE button. So where/why does it need saved again, or thru some other method?

Thanks

You didn't mention that you had actually saved it. If it was saved, as you now say, it should appear as a Tower/Spotter camera marker on the map.

Also remember (as described in the documentation) that the Tower/Spotter camera mode must be active (green) before you can click and load a saved Tower/Spotter camera marker. The same applies to World camera markers.

You can also verify that the camera was saved by checking the camera.txt file in your Spotty26 installation directory. If the entry is present there, the camera has been saved correctly.

Edited Thursday at 05:02 PM2 days by Cap737Delta

Thanks, yep have saved every one, and they do not appear on the map as a retained marker. I saved a tower location at KBJC. If I activate the tower button, then hit the CAM button I don't see a retained marker there on the map. I'll have a look at camera.txt thanks for the help.

Edited Thursday at 05:55 PM2 days by Noel

Did you click Spotties that enables saved camera markers to be seen on the map?

Just now, Cap737Delta said:

Did you click Spotties that enables saved camera markers to be seen on the map?

Nope, that must be the issue. I would have imagined the save routine would be enough but alas...it apparently wasn't. Cheers and Thanks

I'm curious about another thing: I notice if I'm a ways from the tower view I just created and saved it jumps to Flyby. How far is that distance do you know?

Edited Thursday at 06:05 PM2 days by Noel

8 minutes ago, Noel said:

I'm curious about another thing: I notice if I'm a ways from the tower view I just created and saved it jumps to Flyby. How far is that distance do you know?

Can you clarify what you mean here?

13 minutes ago, Cap737Delta said:

Can you clarify what you mean here?

Let's say I create a tower view at airport X. Just after takeoff I hit the TOWER button, then the CAM button, which takes me to the tower view created and saved, and I can see my plane after takeoff. I then turn off CAM and am back in the VC. 20 miles away, I hit TOWER button again, and CAM button. It briefly goes to that tower location, but very quickly instead of staying in that TOWER button view the app changes to Flyby view. Just was wondering how far one has to be from that tower before it auto changes to Flyby.

I hope this dev sells a lot of copies it deserves to for sure. Thanks again

Just wondering, are you using Spotty26 v1.5.1?

Why click Tower every time you go back to Cam, no need to do that. Once in Tower mode it stays in Tower mode when Cam is ON.

If you are using FlybyO it will override any other camera mode after some seconds.