t_a_h

Hi all, I have installed the latest of Pete Downsons ADVDisplay. Whenever I activate it and dock it somehwere within my 2D panel of any plane, I get a realy nice problem! The screen flickers as when it fold and unfolds itself, the mouse cursor becomes funny little and doubled and all my graphiccard gets confused. When I disable ADVDisplay, it is all ok. I have already installed many different nvidia drivers from www.guru3d, but that didnt help. I can remember the time when it was just functioning normal. I have a Epox 8k3a mainboard, AOpen GF4 4200 550MHz, 768 MB DDR 2100 and Windows XP Pro SP1. Do you need more info about my system? So, can you tell me what is going on? Can it be that it has something to do with latest windows update of Directx9 via automatic windows update function??? Some configuration I should better not have activated with RivaTuner2? I have installed the nvidia detonator driver 42.90 Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Well, if you have the money to spent for the PFC... I havent, but I'd love to buy them! I'd say a joystick is tooo sensitive. If I can control a B747 as easily as a F16 with the same joystick, there is something wrong. That was the case with my joystick. Both have about the same price, so...But I guess if I would try just for some minutes the PFC, I wouldnt spent a nother look at my CH-YOKE. But I am not cracy enough to spent sooo much for a single gaming device I wouldnt use with anything else. I already spent a lot too much money in ADDONS! With the money I spent already, I could have been able to buy twice a airline ticket between Europe and USA!Well, it's always a question where the focus is... If you know what I mean.Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Hi,I have them as well. I love them! Best I ever bought for the FS2k2! I used to have a MS ForceFeedback 2 Joystick, but now it is a much more realistic feeling to fly with these CH YOKE and PEDALS, both USB.Installation was easy and with FSUIPC I can calibrate them and even configure buttons and axes of the devices!Well, I havent them for years, just now about two month. So, I dont know how long they realy will function.If you can affort it, you should buy them for sure!Just one contra: If you have not the space on your desk, need space for your body to lean forward to reach easily your keyboard to work, you would have a little problem. BUT, they are easy to unscrew and remove from your desk table. If you have a place near by to park them, no problem.Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Thax a big bunch!YOur the only one who replies and gives me just the right way the info I need. Thanx again!Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Hi Stanley,somehow I have to reboot my brain. Ah.. after setting up my 3D driver within nvidia control panel, I wonder how to activate the glasses. I have the choice of activate them by key command or have them ON all the time. I prefere by key command. But when to use it? I dont wanna have the effect just by working - not flying. But when I start FS2k2, these key commands are not avayable. Cant the 3D effect turn on automaticly when I start FS2k2? Why is there a control panel just for games within the 3D stereo control panel?Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Hi guys,just a little question:How to add fuel tanks to a existing aircraft?I have AirEd and AAM, but somehow I cannot add a line like a fuel tank or two to the file by using these editors.Is it nessesary to edit the air file or is it good enough to edit the aircraft.cfg and modify and add these tanks? I wanna have a better concorde as the concorde from the "Project Concorde 2003" but the fuel tanks are wrong.DO you know how to approach this problem?Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Hi,well, sofare I was already going well, but when I have set all as it should, I still dont know how to activate the 3D effect for my glasses when I am within FS2k2. I know how to configure the driver and settings, but not how to turn them ON for FS2k2.Any idea?Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Hi guys,just ONE question:I own E-Dimmensional wireless Glasses - How to activate them within FS2k2?Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP Pro (German Version); FS2k2 pro (German Version)

Hi,the last part was in german? Well, I send it again with all text in english. Look out for a t-a-h@gmx.de E-mail.I still have to configure Outlook so it sends all mails by my other domain e-mail addy.Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP home; FS2k2 pro

Hi JD,just send you a reg request e-mail, 'cause I had to reinstall my WinXP and all what it needs so I can run FS2k2 again.I send you the mail by GMX, but you kow me by t-a-h@t-a-h.comThe GMX mail addy is one of the many I have...Did you get the mail and reply?Ah, did anything changed or happend, like a gold patch to 3.1 or anything alike?Thanx a bunch.Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a ; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE Peddals; 17" Dell Monitor; WinXP home; FS2k2 pro

Hi,what I now experienced is that THIS FSUIPC 2.96 doesnt do any good to me. I found out that I had exactly the same FSUIPC befor figured by the file size etc. So, I gonna try the latest one out with the PIC-A320.Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP home; FS2k2 pro

Hi,I own them. But after I bought a AOPEN GF4 4200 550MHz Card, I get a blank black screen when I just and only plugg them at the DVI+Adapter Port of my card. So, I cannot use them. Are they unusable with GF4???Or what is the way to get them working? My Card should be best to use them and fly with them, especialy since I have the PIC-A320 with just a brilliant interactiv VC!Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP home; FS2k2 pro

Hi JD,somehow I changed something if windowsxp by X-Setup and now when I start RC301 by doupple clicking the icon, teh windows install message appears for some seconds, looks all around and even if a disc is in the drive and then RC3 starts. But no button to send a registration key request or else. But it seems it should be unlogged again, 'cause Outlook XP called me to re-activate it with the original CDR and after I did, the same installer window didnt come again when I started Office XP.What do you think?Regards,T-A-H MultiMedia Productionshttp://www.t-a-h.comt-a-h@t-a-h.comAMD TB 2400; Epox 8k3a+; 768MB 2100 DDR; Aopen GF4 4200 550MHz; CH-YOKE + Peddals; 17" Dell Monitor; WinXP home; FS2k2 pro

Well, 2.97. I cannot find a link/WebSite with the older 2.96 version. Could you mail me the one you use without probs?t-a-h@t-a-h.comThanx a bunchTorben.

I as well experience weard behavieor of RC3 and PIC-A320. Sometimes it works without any problems, but mostly it doesnt at all. When I wanna call pushback and ready to taxi I get just that the agnollagement that I may pushback and call ground. Well, no ground there but I have the right frequency for sure and PIC-A320 has it too. When I activate shift+ctrl+k otto sometimes works as he/she is supposed to, but too often he/she doesnt work at all! When he/she works, all the way goes well as planned. Just the PIC-Bug that often I cannot depart without a SID without knowing that a SID will be selected automaticly, so I cannot setup RC3 befor for flexible departure.So, is it a PIC Bug that RC3 acts weard or anything else?

Hoi JD,I love RC3 and fly mostly not without it. I run the latest beta 3.01So, my little problem is that when I have had to select and call missed approach, I take vectors and get vectored to the point where I get handeled to approach control. He gives me the same wrong runway I got first time. First time I changed the runway, 'cause FS2k2 ATIS told me the other one. Well, RC3 seems not to remember my change of runway. I had to change it all again. And that by flying a B733, not a single prop GA. Why is it often that RC3 gets the wrong runway and not the one FS2k2 ATC gets by listening to ActiveSky? FS2k2 is very correct with every Airport, 'cause ActiveSky tells the correct one. But RC3 doest care. Will you look into this for the upcoming update?ThanxTorben.

Hi Bob,where did you get these chatter files to have frankfurt sound like real? I was now searching for hours for those files in diverse sites, but cannot find any german chatter files. I mostly fly in europe and germany, 'cause I live here. So, if you cannot point out the source location (url link etc.), you may send me the files via mail. I enjoy a ADSL cable connection, so bandwidth is no matter with me.ThanxTorben.

Well, my retailer has some nice cards. But tell me the BIG dif. between the "Asus V8420 Deluxe DVI Vio T42 TV-Out+Glasses" (with Ti4200, 128DDR, RAMclock=550MHz, RAMDAC=350MHz) for 249,98

Which GF4 should I buy? And why???I wanna enhance my PC with a new GF4. Soon the price drops and I wanna have the most fun with FS2k2 and as well in combo with eDimensional wireless glasses. Yep, with my old ABIT GF3T200 GraCa it is terrible and I cannot setup the eD right, no matter what drivers. Well, I have a nice CPU and MoBo and a lot of DDRam.Please tell me which GF4 and why.My system in sort:AMD XP2400Epox 8K3A+ Motherboard768MB DDR RAM 4200WD Cavia HDDsWinXP homeFS2k2 proCurrent GPU: Abit GF3T200 runs good with latest nvidia driver.Now, please your input.CiaoTorben.

Well, I just did ALL! I tried the old driver as combo I found within the eDim CDR and was able to setup the 3D better, almost perfect. BUT then I started FS2k2 and saw realy bad display quiality. The ground was blocky and unsharp. I tried all different settings and tweaks to get it better - no go! So, what should I do with eD having bad quality in normal view mode? I installed back the latest driver of nvidia and got back what I was used to see, best image quality. I installed as well the beta 40xx stereo driver and tried to set it all up again. Now it was a little better but not realy what it should be, ok? Now I tried FS2k2 again and WOW, realy nice quality and speed. But as I went into fullscreenmode and switched on the 3D mode of eD, my graphiccard could not keep it up and I got two different images each eye and BAD shifting images untill my eyes burned! So, It doesnt matter which driver set I try, it doesnt run together. Well, I have a old GF3T200 from ABIT. I gonna buy myselfe a nice GF4T4200 Turbo in some weeks, 'cause the price is droping these days. I hope to get much better image and 3D image quality wit them and as well working eD wireless glasses!What do you think?I enjoy a AMD XP2400, 768MB DDR all on a Epox mobo 8k3a+ and OS= WinXPCiaoTorben.

Hi,I just got mine and have these problems: I installed the 40xx beta stereo driver for nvidia and tried to syncronise the stereo effect, having the glasses on. Well, I run 100Hz and a high res at 1156x856 and no stereo separation. The glasses doesnt flash, but the image doesnt get still and cannot sync as it should. Since my glasses doesnt flash around, I think the batteries are still fine. Ah, when I select a lower res., I see that the stereo test get more de-sync. It hurts my eyes!I will try today the other drivers if that get my eD glasses syncronised. Will I loos graphic performance with older drivers, older than any 40xx?Ciao and thanxTorben.

Hi,I've got the same mobo. For your problem with the bus clock, try the latest bios from epox. Well, I do not overclock any CPU. They get too hot and I cannot sell a edited CPU anymore. I am happy with the XP2400, cause I dont wanna buy new RAM all the way to get any use out of the 333MHz CPU-DDR clock. And the XP2400 is realy stable with our mobo indeed.Well, I didnt know it is doable to overclock a XP2600 or XP2700 Thoroughbred-b without distroying it!CiaoTorben.

Ok, I see it now. NOT ANOTHER PATCH OR UPDATE AT ALL FOR THE LAST OF OUR LIFES. That means I have spend too much money for PIC and I will have to leave it in my hangar unused for the rest of my life probably.Thanx for your replies.

Well, you are absolutely right! So, but why isnt anyone from the PIC developement team showing up and reply? They should be able to answere why they dont do a working patch so it works like all the other great FS2k2 payware aircrafts. I dont argue any of your points, you as a fellow an customer. I'd love to read what the ones say whom produced the PIC.CiaoTorben.

>Well I do 3 hours on, then enroute at crz alt have the crz >pilot {my cat} take over ...And what do you do when you wanna do a long haul trip? 8 hours over the ocean USA-Europe or Europe-Asia or alike? Have you the time to spend 10 hours flying even doing things parallel but still take care what weather and your planes does enroute? What is if a storm comes up but you are not there to see it and fly around or change flightlevel etc.? So there are reasons to be at the pc and watch the trip 'cause somethings dangerous can come up and I need to interact. So better fly with time compression and interact if need then to fly without time compression and not being around when I better should be around.What you say about that?