Branech

Thank you for your reply, Dave I am pleased that this problem will be solved in the near future. For information, VFR flights and the corresponding VFR levels are allowed in France until FL195 Pilot2ATC has become a software of quality and I am sure that it will become, in the future, a great software unavoidable. Gérard

"for Pilot2ATC, for VFR flights, your altitude should be an even 1000' plus 500, when your route is westbound, like 4500'. When eastbound, it will be an odd 1000' plus 500, like 5500'" Yes Dave, it is exactly what I say, but in Pilot2ATC (in VFR Plan Type) I cannot put an altitude 1000 '+500 in compliance with the rule of halves circulars (East/West) . That's the problem! I think there is a confusion with the term "flight level". In France we say "VFR flight level and IFR flight level " NOTE : "This may not match the rules in every country (like in Italy where the odd/even rule is North/South instead of East/West) but for now, it is how Pilot2ATC works." In France the rules North/South are only applied for the IFR traffic.

Thanks for your answer vololiberista, Do you fly in the real life ? Sorry, but I have a PPL and when, in VFR, I fly in the real life (in France), I must choose a odd level with the altimeter set to 1013. For further explanation, I advise you to look at the documents for the preparation of the private pilot's license or the documents of IVAO.

Hello, When I create or import a VFR flight plan, Pilot2ATC refuses the altitudes + 500ft. Example: If I indicate that I want a level of flight 065, Pilot2ATC will correct this level of flight and will impose me a level 080, 090 or even 100. Yet in VFR the flight levels are odd levels. Why does Pilot2ATC impose false flight levels ? Why Pilot2ATC chooses for me the altitude at which I want to fly, whereas in VFR flight, it is the pilot who chooses his level of flight in compliance with the rule of halves circulaires ? Gérard

This is a hit and miss, because it works for me most of the time without a glitch. What kind of problem ?I have installed VoxATC several times without success. The same problem remains. I fly in the French and Switzerland countries. Perhaps these countries are the problem ?

With VoxATC V7.3 : In VFR flight, Request Airport Zone Transir doesn't work at all : I only have messages "Please Wait"

I forgot to write : ......................................................................................... 4/ I deleted all the words with "Internal working" and "VoxATC" from the registry with RegEditX 5/ I rebooted my PC ........................................................................................

1/ I uninstalled VoxATC P3D V7.3 with Total Uninstall 6 2/ I installed VoxATC V7.2 and register with sucess 3/ I uninstalled VoxATC V7.2 with Total Uninstall 6 4/ I deleted all the words with "Internal working" and "VoxATC" from the registry with RegEditX 5/ I Installed VoxATC P3D V7.3 6/ I opened P3D and opened the "Prompt Display" window : I have always the message "Sorry, this demo has expired" 7/ I tried to register VoxATC P3D V7.3 and I have always the message : "An incorrect serial number or registration code was entered" My V6xx registration code Works with V7.2 and does not works with V7.3 The problem is not solved

OK jabloom, I will do it all over again and do as you recommend with Total Uninstall. I will also delete all the words with "Internal working" and "VoxATC" from the registry with RegEditX

Thanks, jabloom1230, for your help. I desinstalled all VoxATC and VoicePop Voices with Total Uninstall. I downloaded again V7.3 and install it. The problem is not soved. I have always in the "Prompt Display" window which displays the following message: "Sorry, this demo has expired" When I try to regiter with my V6.xx code I have this message : "An incorrect serial number or registration code was entered"

Thank you very much for your answer and for your help. VoxATC does not work without registration because I have the "Prompt Display" window which displays the following message: "Sorry, this demo has expired" I do not understand ! For the 7.2 version I had managed to use my 6.xx registration code and it worked very well

Hello, I used version 7.2, and now I cannot register version 7.3. what can I do ?

CORRECTION : IT IS NOT "...OUT OF ZONE" BUT " ...CLEAR OF ZONE". The problem is the same...

Hello, I installed VoxATC Beta 7.2 In VFR flight, after a zone transit, When I call back with the sentence "F-... out of zone", the controller does not understand me and asks me endless to repeat. Does anyone have a solution to offer ?

Bonjour, Pour ceux qui ne le savent pas encore la scène de Provence Alpes Côte d'Azur VFR Vol1 vient de sortir. C'est une pure merveille ! Brane

It may be too great to be true ! Let's wait and see....

I have the same problem (VFR/IFR) There is no possibility to Add many airports/airfields as Departure Airport or as Destination Airport. Exemple : LFLI (non controlled), LFLP (controlled)

Hi Dave, Thanks for your answer, The airports in the flights plans are : LFBX - LFTW.vbf, LFBZ - LFBD.vbf, LFMK - LFBA.vbf, LFMV - LFLC.vbf, LFTW - LFBP.vbf . See and download *.vbf files in my Dropbox : https://www.dropbox.com/sh/6f30hbvcg82no0e/AADIikTPmZBhdifvBvsxRF59a?dl=0 Regards Gérard Note : I just opened a LFMV - LFLC.vbf with Notepad and i see in the bottom of the page : "<Type>IFR</Type>" However VFR Flight Plan was marked in the "Plan Type VFR/IFR" Compare with the VFR LFMV - LFLC - Caumont à Clermont-Ferrand-Auvergne [TURBINE DUKE GKOHL].pln

Hello, 1/ It is impossible to set a VFR cruise alt (before or after to choise a VFR flight plan). If I choise 4500 ft, 5500 ft or 6500 ft, (With VFR Flight Plan marked), Pilot2ATC put FL60. 2/ I have to put the VFR transponder code for France (7000) in the config menu at every time I flight otherwise the controller ask me to put 1200. It's impossible to register the VFR 7000 transponder code in the config menu.

This problem is actually a detail because I saw that we can easily change the transponder code in the top menu (ident / XPDR)

Hello, The transponder VFR code in France is 7000. We can change this code in the config menu but this code cannot be saved

Hello, During a VFR flight, I noted the following : 1/ After being allowed to pass through a controlled zone, the controller does not request to report overhead the airfield when the route cross the installations and/or to recall when I arrive zone exit to exit the frequency. 2/ Arriving at the edge of the exit zone there is no option to report that I arrive in zone exit and to ask to leave the frequency. 3/ After the landing, when I arrive at the park, there is no possibility of asking to leave the frequency.

Ok Dave, Thanks for this information.

Hello, I just bought Pilot2ATC and I do not find the way to request and receave clearance for RW backtrack

Hello, With P3D V3.3.5, I encounter a VFR European airport zone transit problem. It happens this way in my case. After transiting to the end of the airport CTR zone, I report "clear of the zone" and the controler simply goes <callsign> tower, "pass your message". And no matter how many times I repeat myself, he will still say "pass your message". The only way to clear the problem is restart the program or just avoid the airport control zone. Has anybody a solution to this problem ? (It seems that this problem exists since several years and it was never corrected in the differents VoxATC versions.)