Frank Tien

Thank you all for answering my question.

Hi, In many videos on line, we can see the pilots pushing the throttle forward when taking-off, hand staying on the throttle till V1. Unlike Airbus which has a notch, how far should 737 NGX pilots push forward? Depending on the N1 mark or the auto-throttle system has motor or something which "takes" their hands forward? Thanks. Frank Tien

Thanks, Kyle.

Hi, In FCTM, IAN Requirements and Restrictions says "airplanes must be equipped with FMC U10.5 or later and IAN FMA displays". Is PMDG NGX qualified for this approach? Thanks. Frank

Kyle, thank you.

Hi, I only use onboard motherboard/cpu video card with 8GB RAM, Win7-64bit, FSX steam and runs PMDG 737 NGX very well. Noticing that 777 has the description "Onboard motherboard or CPU video is not supported", just would like to know what will happen if I install the 777 with my current hardware? My system meets all the minimum requirements except the video card. Would like to fly it so much... Thanks. Frank Tien

Hi, After another trying, it's NADP issue. Since I want to set flaps up speed, I should choose NADP 2. It works now. Thanks for your help.

I have selected Take-off Flap 5 in FMC. Maybe I ordered flaps-up speed too soon because I selected NADP 1 and was just at around 1500ft? (In the tutorial reads "NADP 1: .... At 3000 feet AGL: *Accelerate to Flaps Up Speed/ *Retract Flaps/Slats on Schedule") Is this the possible reason?

Yes, it shows flaps 1. But the picture was really captured AFTER commanding "set flaps up speed", with flaps 5. My question is, why did my co-pilot set speed to 169 after commanding "set flaps up speed"? To my understanding, after ordering flaps up speed, we will lower the nose and the speed will increase, then triggers flaps 1--what you see in this snap.

Hi, After ordering set flaps up speed, my co-pilot doesn't set the proper speed. As you can see in the picture. What's going wrong? Thanks. -------------------------------------------------------- FS2crew 2.2 with NADP1, Ifly 3.2, FS9.1, Win7

Below is the way I found the update file, the associated link (purple) seems to be wrong. Through your picture, now I know that people should go "download--service updates" to get those files. Thank you very much.

I use Firefox, too. Downloading liveries from PMDG is OK. Tried IE9, the same result. :(

These are what I saw: B1900C: https://lh6.googleusercontent.com/-ivhBWtHnTkE/UyO5iRdqIBI/AAAAAAAABIY/7ST0kE7byMM/w1215-h216-no/B1900C.jpg B1900D: https://lh4.googleusercontent.com/-e8X0VMpflsU/UyO5ik6q7_I/AAAAAAAABIc/st8RXJezGfo/w1216-h191-no/B1900D.jpg

Hi, The 1.2update link on the official website seems to be broken. Where can I get those updates? Thanks.

Hi, In the checklist of Before Starting Engines says, " Cowl Flaps - Open, Off ". I am not quite sure what it means. Should I switch it on Open or Off position? Thanks. TCC

Hi, I would like to know if DC3 has strobe lights. Thanks. TCC

Hi,Run iFly Config Manager as and Admin "with FS2crew botton control checked" and press update, still failed. Panel.cfg was not updated.I found I should disable FS2crew botton control first,-->update-->exit, then run Config Manager again, enable botton control, press update. That would work.Thanks for your remind.TCC

Hi,After re-installing Ifly 737 sp 2.1 and Fs2crew 1.6, my Fs2crew main panel doesn't pop up by clicking Standby Altitude Indicator.I am sure that:~F1 registry repair tool has been run~Add Fs2crew by using ifly configuration tool (enable button control)Thanks for your help.TCC---------------------------------FS 9.1Vista (UAC turned-off)

Hi,During engline start, in the film(start.wmv), we count the numbers of blades...1. What is the blade here refering to?2. Here pilot says to count 8 blades, but he primes 12 times, why?Thanks for your reply.Regards,TCC0928

Hi,According to the checklist, before touch down, we set RPM to 2050---except missed approach, 2550.Why not set 2550 or "the hightest" before touch down, like many other propeller aircrafts do? Thank you.Best Regards,tcc0928

Hi,According to the checklist, before take-off, we set mixture to auto-rich.But, if we take-off at high-elevation airport, say, 5000 or 6000ft, how should we adjust mixture? Still auto-rich? Thanks a lot.Regards,tcc0928

Vonmar,It will look even better if I do something on the *.bmp. Yes, I did it on the copilot's side. In vc, I only removed Sperry, no extra adding.Now it's OK with 2D and VC.Panel Studio can do a lot of things, removing, adding, resize... Actually I can only use a small part of FP's functions.TCC0928

Hi,From your idea, I find that I should remove it from FO's panel. Now it works. Thanks for your reply.

Hi,I use FSPanel Studio to try to remove sperry and add default FS9 autopilot.But when the AP is on and the DC-3 is turning, it just uses rudder to turn, causing serious uncoordinated turn. Did I make something wrong? Is there any way to fix this? Thanks.TCC0928