Daniel_Gomes

Israel, Afraid not.... I do not have the OC MCP/EFIS so I can't test if it works. From OC I only have the FMC, the first one that was sold either in pieces or assembled. Mine was assembleded. For the MCP I have the GoFlight MCP/Pro and no EFIS so far... Cheers, Daniel Gomes

Hello, Same here. Have the first FMC from OC, that is working properly with another addon (LVD) trough SIOC. I am unable to get it to work with the NGX... The script compiles OK, no errors, the SIOC software recognises the key pressing but the interface to the NGX is not performed, I guess, as any key press results in nothing. Any help on this will be apreciated...... Cheers, Daniel Gomes

Tks Steve, I will go for that file once at home. Cheers,

Hello Steve, One small question. Is there any way to print all options available in each data box, ex, Switch event, switch Action and so on? I find hard to find the correct option to a particular event/action from the drop down box, as there are so many of them!!! Not a big deal but if such option was there, it will be, definitely a great help … Once again, tks for your software. It works like a charm…. Cheers,

That was the least that I can do! Cheers,

Steve, All is fine now! Excelent piece of software!!! :good: A fresh NGX re-install did the trick!!!! Cheers,

Now I have tried...... No luck I'm afraid.... I will try in another computer as soon as I install the NX....

Terry, No I did not... worth the try.... Tks for the sugestion .... Will report back ... Cheers,

Hello Steve, Here I am, back to this issue. I have downloaded, and installed, the new version0. 9.0.0 with exactly the same result. No digits whatsoever on the MCP. I have, also tried removing FSUIP from the Sim. No luck. I have noticed a SimConnect: Exception Received: EVENT_ID_DUPLICATE in the log. Could this be related to the problem? Below is the new version LOG: 19:18:54 GoFlight Connection Starting..... 19:18:54 SimConnect Connection Starting..... 19:18:54 SimConnect: Event Received: PMDG Aircraft Loaded/Flight Loaded 19:18:54 SimConnect: Event Received: SIM, 1 19:18:54 SimConnect: Event Received: SIM, 1 19:18:54 SimConnect: Event Received: PAUSE, 0 19:18:54 SimConnect: Event Received: PAUSE, 0 19:18:54 SimConnect Connection Started 19:18:54 PMDG Connection Starting..... 19:18:54 GoFlight Connection Started 19:18:55 PMDG Connection Started 19:18:55 Synchronising Switches & Selectors ..... 19:18:55 SimConnect: Exception Received: EVENT_ID_DUPLICATE 19:18:57 Synchronising Switches & Selectors Complete 19:21:00 SimConnect: Event Received: SIMSTOP, 0 19:21:00 SimConnect: Event Received: SIM, 0 19:21:05 SimConnect: Event Received: Quit 19:21:08 SimConnect Connection Starting..... I have another PC with FSX installed. I will install the NGX and your driver just to confirm that the MCP Pro is working properly. For sure I will report back... Cheers,

Hello Steve, My apologies for the lack of news but went on an unexpected business trip and have no access to my Sim. Probably only next week I will be home, again … Cheers,

Tks Steve.. As soon as I get home I will try the test program although the MCP works fine with Leveld and the default aircrafts as well all other modules... Cheers,

Hello Steve, As promised here is the follow up... I'm afraid that even with the last build installed the mcppro doesn't work. Simply it won't change the displays. At the aircraft they change but at the MCP, don't. One other thing that is strange is that at a certain point when I'm turning the Captain Course knob or any other knob actually, at the mcp, the A/T led lights up! If I continue turning the knob further, the led goes off again... This led thing goes for the other knobs as well as they light on and off several of them. I have tried, also, with a powered usb hub and without any other GoFlight module. No luck... Cheers,

Hello Steve, English it is.. Win 7 64 GoFlight Software Version 2.3 build 1 PM on it's way ... Once again, tks for your time ... Cheers,

Sure. Here goes: 23:48:28 GoFlight Connection Starting..... 23:48:28 SimConnect Connection Starting..... 23:48:28 SimConnect: Event Received: Start 23:48:29 SimConnect: Event Received: PMDG Aircraft Loaded/Flight Loaded 23:48:29 SimConnect: Event Received: SIM, 1 23:48:29 SimConnect: Event Received: SIM, 1 23:48:29 SimConnect: Event Received: PAUSE, 0 23:48:29 SimConnect: Event Received: PAUSE, 0 23:48:29 SimConnect Connection Started 23:48:29 GoFlight Connection Started 23:48:29 PMDG Connection Starting..... 23:48:29 PMDG Connection Started 23:48:29 Synchronising Switches & Selectors ..... 23:48:31 Synchronising Switches & Selectors Complete 23:48:58 SimConnect: Event Received: SIMSTOP, 0 23:48:58 SimConnect: Event Received: SIM, 0 23:49:12 SimConnect: Event Received: SIMSTART, 0 23:49:12 SimConnect: Event Received: SIM, 1 Cheers,

Yes ............

Hello Steve, No luck on the Driver. I enclose a link to a shot of the GFConfig, Your interface and 737NGX_options.ini. Also to a photo from the McpPro ande the cockpit of the NG. https://picasaweb.go...feat=directlink https://picasaweb.go...feat=directlink I have tryied to attach a zip file with these images but no joy... Tks for your help. Cheers,

Hello Steve, Tks for you answer. For sure I didn’t look into the SDK thing. My bad… As soon as I get home (in a few hours time) I will look into it. Regarding the .NET issue it was installed, and updated, in sequence of the driver installation so I assume it is up-to-date. I will report back …. Cheers,

Hello gents, New to this tread as I have recently installed the NX. Steve, before all, tks for your work into this drive. Just what I was looking for. However, after downloading and installing the interface, last version, I have a problem with the GoFlight MCP-Pro that I would like to have sorted out. I suspect the cause but want to hear your opinion, if possible. All the 3 “lights” are green in your interface. When I turn the knobs the digits, at the MIP, change but at the MCP-Pro don’t. Also the auto-pilot green led at the unit remains lighted regardless of the panel state for the autopilot. So the plane is flyable with the interface but no digits update at the unit. My suspicion goes to the Firmware version of my module, version A19, but I have no confirmation about this. The problem is that I live in Portugal and to be sending the unit back to the USA for update is a difficult process, with the Costumes, that I want to avoid, if possible. I would like to hear from you about this just for me to decide what to do from now on … Cheers, Daniel Gomes