qwertzu12

Ok thanks. I was not sure if these are the correct lines for the 777 locked RAAS and I didn't want to break something. I'll try it. After adding the lines, it works! Thank you very much!

I looked in the RAAS Trouble Shooting section and noticed that there are no RAASPRO entries in my DLL.XML file. Can you please show me the correct lines to add there? Thank you!

I have a RAASPRO folder in my FSX directory. What does it mean the speakers are set up properly? FSX uses the same device like windows for music and voice (that was different before, I had to change it), but i still here nothing.

There is no voice which tells me which runway I am approaching or on which runway I am. Whether during flight nor during taxi. I have no RAAS in the FSX bar. It is right that I do not need fs2crew?! I write a ticket to PMDG support.

Hi, the RAAS does not work. I activated it in the FMC, but I can't hear anything. I also executed the MakeRwys.exe, but still nothing. It happens with the 777-200LR (didn't test the freighter yet) on default and add on scenerys. What could be done here? Thanks Niclas

Hi,is there something new with the fix?

The reinstallation didn't work for me too.

Yes, the 800- VC works fine.

Hi,after the installation of SP1b, there is still no VC on the 900.I think that is not good.Just tried the high qualitiy textures, they don't work too.

Ok,thanks for the fast reply!

Hi,I tried to fly the 737-900 today, but all I saw was this:I'm sorry, its a bit dark, but I hope you see theres no VC anymore.When I move upwards (in the virtual cockpit) I can see the textures of the real VC, but I can't push any knob. This occurs only with the -900 (with and without winglets), the -800 works fine. I noticed that after installing SP1. Before SP1, the -900 worked fine.RegardsNiclas

I had exactly the same, but after switching avira off, there were no stutters anymore.

Here I am again.This CTD unfortunately was not nonrecurring. I tried to do several flights (from several airports), but i could not end one flight. I could not take off, because I got a CTD or a bluescreen. I have never had this with NGX with the "old aircraft.cfg".My specs are:Windows 7 64 bitGeforce 8600m GTIntel Core 2 TT7700 @ 2,4Ghz I know they are quite low, but I could fly without any problems before. Btw the livery manager works fine now^^.

Thank you works again.However I got a CTD (with g3d.dll as the corrupted file) while standing on the runway, which was the first one with NGX, but I hope this was nonrecurring.

Hi,I have just installed the new livery-manager and have now a big problem. I tried to install the Amercian Airlines livery for the 737-800WL. After that , I have no 737-800WL in the livery manager to choose (on the left side under Installed Aircraft Variants). All others are still there. When starting FSX, I can choose all 737-800WL's; but with the gear down (in the preview window of fsx). When starting a flight, The 737-800WL's all have gear up and so I am supposed to crash. (All other variants work fine). Is there a solution beside reinstalling the whole NGX? ThanksNiclas

No, I did not apply the hotfix, becuase everything works fine, except these routes. This was my route (EDDL-GCFV): MODRU8L Z283 SUMAS UZ283 LNO UZ707 FAMEN UQ249 DISAK UQ237 LMG UN10 SAU UN857 TERTO. It occured after entering the SID. But one my next flight (EDDL-EINN) I used exactly the same SID without having a CTD. I don't remember exactly when I had CTD's with the other routes but definitily not while choosing SID's or STARS.

Normally I enter them via scratchpad. Do you mean, this makes a difference? I'm not 100% sure if I entered the waypoints via scratchpad. Maybe I entered one or two of them via keyboard.

Hi,today I tried to fly to the Canaries with NGX but I got CTD while entering the routes into the FMC. First I tried to fly Hannover-Teneriffa south (EDDV-GCTS), then Dusseldorf -Teneriffa south (EDDL-GCTS) and then Dusseldorf- Fuerteventura (EDDL-GCFV). I wasn't able to start a flight due to these CTD's.After it I tried another direction: Dusseldorf-Shannon (EDDL-EINN) and all worked perfect. I have never had any CTD's with NGX except this time. Is there any solution, because I'd like to fly there. ThanksNiclas

I'll try to give more thrust. Is it more than you need to retract the spoilers in the 747 (for example)?Sorry, I meant I activate the spoilers by pressing SHIFT and # (that was the default command).

Hi,I noticed that the spoilers do not retract after landing when the thrust lever is advanced. I have to retract them manually. Am I doing something wrong (I arm then by pressing ctr and #)? Cheers Niclas

Are these dates in this table for aircrafts with the SFP equipped, or for aircraft without it?!

Hello,sometimes (this happens not always but very often) when I try to enter a SID, the FMC doesn't show the SID in the navigation display and there are also no waypoints in the "legs" list of the FMC (of this SID). There is only a short blue dashed line (the same line which connects the waypoints before activating the route) shown in the navigation display; without any waypoints. When I choose another SID and then the SID I want, everything is fine. What could be the problem here.This only happens with SID's, STARS and approaches work fine. Tank you cheers Niclas

Hi,is there any way to have turbulences while flying NGX? The introduction tells me to deactivate them, but I would like to fly some bumpy approaches with the NGX too. Greets Niclas

Ok but how can I fix the viewpoint in the 747?

Hi Matt,thank you for your reply.I found this "MomentumEffect" in the camera.cfg and it is set to "yes". I had no time to set it to "no" (or what else) and to test it. But isn't this for every aircraft?! I mean when flying a loop (for example) the view moves down and goes back again (like the real view when having a lot of g-forces). I like this effect. Will it work with "MomentumEffect=no" too?I only have that problem with the 747x.