bagno

sorry, wrong page

hi, unfortunately it does not work. I have tried many word combinations with no result. regards, bagno

hi, I have installed the interim version,but still no response to an emergency notification. I see the emergency option in the radar contact menu, but it only works by pressing the corresponding number. It does not recognice the spoken words. ("departure, speedbird 1007 declares emergency"" ) thanks, bagno

hi, Still waiting for an adjustment. thanks bagno

hi, Thanks for reply, i have installed the latest version. Pending for an adjustment. regards, bagno

Hi, If i want to announce a emercency, nothing is happen. I've tried different flights, but no result. In the earlier versions of MCE it worked well. Someone who has the same problem, please help. thanks bagno

Hi, problem solved with the updated version 2.5.38 thanks to everyone for the support! regards, bagno

thanks in advance! regards, bagno

hi, The flight EDLW to EDLP does not have a departure controller or approach controller, but the center controller handles the traffic instead. EDLW ground - 121.82 Mhz tower - 134,17 center - 118.75 EDLP tower - 118.27 Mhz ground - 121.92 cruise altitude: 3000 feet (GPS, no waypoints) After takeoff tower hands me over to center, and after a short time center asked me: do you have the latest weather information, and which approach i want. In the radar contact window i see the options: negative or positive, and my answer is: negative sir, no weather information. But center does not responds, and after a while i press the number in the radar contact window corresponding the number: negative sir, and now center does reponds with the latest weather information. after I received the latest weather forecast, i request ILS runway 06, and again center does not responds, on this moment i see in the radar contact window the approach options (ILS runway 24 or 06), after a while i press the number in the radar contact window corresponding ILS runway 06, and now center does react. the example above, is what happens when there are no approach controllers, but only a center controller (a real life example) Thus when i fly a flight with departure and approach controllers, everything is oké, but EDLW to EDLP does not have departure and/or approach controllers. (this is what i mean with configuration) hopefully this will help, regards, bagno

thanks for reply, I already installed FSUIPC 4.90 and updated the data base with makerunways. The problem exists only with the following configuration: ground-tower- center-tower-ground. And not with the configuration: ground-tower-departure-center-approach-tower-ground. I suggest you try the flight by yourself, then you will see what I exactly mean. thanks in advance bagno

hi, It is not a issue with this airport only, i tried several other airports. EDLW --> EDLP , control asked me: do you have the latest weather information. my answer: negative sir, no weather information. no responds from control (it does reponds when pressing the corresponding number in the radar contact menu, and then i hear the weather information) control asked me: which runway do you request, my answer: control, speedbird 1007 requesting ILS runway 06. no responds from control (again it does responds when pressing the number in the radar contact menu) But when asking for runway 24,it does work. The same with flight : EDLP -->EDVK no weather information, and when i asked for runway 04 nothing happens (only via the number in the radar contact menu) But when asking for runway 22 it works. Strange situation! regards, bagno

hi, i'have tried everything, again and again but no respons from dusseldorf control. no weather information (waiting for a long time), and no respons when i'am requesting ils runway 06 Here it ends for me, after flown the flight dozens of time with the same results. Maybe I'm doing something wrong, despite the fact that I use mce for a long time. regards bagno

when there is finally an update for the proper functioning of radar contact?

Can someone try a short flight from EDLW to EDLP. - Dusseldorf control asked me: do you have the latest weather , my answer: negative, no weather information, speedbird 1007 control does not respond with the latest weather information. (it only does when hitting the corresponding number, in the radar contact menu) - control asked me which approach i request, my answer: control, speedbird 1007 request ILS runway 06 control does not respond (again only via the corresponding number in the radar contact menu) now i'am requesting runway 24 (the opposite), and now control does respond! (weather conditions: no wind, cruise altitude 3000 ft, Cessna skyhawk 172)) I would appreciate, if someone wants to try this flight. I asked mce, but they say it has to work?! thanks in advance bagno

After landing tower hands me over to ground, so when i vacated the runway and contact ground and request taxi to the ramp, there is no response from ground. The only way to get a reaction is hitting the corresponding number in the radar contact window. I have tried several flight plans, but the problem still exist. Anyone the same experience? please let me know, regards, Bagno

thanks for reply, i'll send you tomorrow some screencaptures. regards, Bagno

requesting IAP does not work after announcing a missed approach. After announcing a missed approach tower hand you over to approach, and approach ask you for your intensions, if you asked for a iap or vectors etc. approach is not responding, i have tried several missed approaches, but it is not possible to get a respons from approach, they keep asking for your intensions. Someone the same problems, or is there already a solution for this? regards, Bagno

requesting IAP does not work after announcing a missed approach. After announcing a missed approach tower hand you over to approach, and approach ask you for your intensions, if you asked for a iap or vectors etc. approach is not responding, i have tried several missed approaches, but it is not possible to get a respons from approach, they keep asking for your intensions. regards, Bagno

maybe someone can help, After calling missed approach, tower switch me back to approach, and approach assign a heading/altitude, then say intensions. Here starts a problem, i ask for a ils approach, but no respond, i have tried different requests (ndb, vor etc.) but still no answer. what am I doing wrong? thanks in advance Bagno

hello, I can announce a missed approach in different ways now, and it works well! on the moment i have no other sentences in mind with "missed" , i am grateful for the top support and the great Multi Crew Experience program. million thanks! regards, Bagno from the Netherlands

Hello, complementing. When the missed option appears, I discovered the following: "tower, <callsign> is aborting the landing" , or "tower, <callsign> is aborting the approach" and it works! But when i use the word missed in a phrase, nothing happens. In any case, a further step. regards, Bagno

Hello, The exact text in RC4 ATC window when the missed approach option appears is: 2- Missed App 3-Req IAP 4-Wind check 5-Field in Sight normally i can see my own spoken text (via shift+z) but declaring a missed approach it shows nothing. hopefully this will help, regards, Bagno

i have tried a few examples of missed approach into the MCE custom voice training, and it does recognice my voice. But back in flight on final, annoucing a missed approach still does not work. In the radar contact window the option missed approach appears, hitting the corresponding number and the tower responds. What i'am doing wrong? I tried the following phraseology: tower <call sign> missed approach - tower<call sign> declares missed approach - tower <call sign> executing missed approach (and many other variations). regards Bagno

thanks for advice, i'll give it a try. If it does work i let you know. regards, Bagno

Hi Steve, thank you for advice, i'll give it a try. (the meatwaters voices are great!) Regards, Bagno