sidali

I disabled it for the airport that's affected ask applied the setting. No change. I enabled it, no change. I disabled it for the airport that's affected and applied the setting. No change. I enabled it, no change.

I installed orbs global 1.3 and vector 1.1 and Stil to no avail. That one airport , TTCP, has the elevation issue If I delete the scenery library entry for the add on scenery for that airport by latin vfr it reverts to the old scenery but with misplaced trees and taxiways. When I reinstall and r add the scenery it gets the elevation issue I installed orbs global 1.3 and vector 1.1 and Stil to no avail. That one airport , TTCP, has the elevation issue If I delete the scenery library entry for the add on scenery for that airport by latin vfr it reverts to the old scenery but with misplaced trees and taxiways. When I reinstall and r add the scenery it gets the elevation issue

Hey DX10 is not enabled. UPDATE: i removed and recreated the cfg file. However on doing that i ran into an airport elevation problem at one of my airports (doesnt seem to affect other airports i fly to) The runway appears below ground... I restored the deleted cfg, the altitude and water texture problem persists :/ https://www.dropbox.....com/s/ky5jtskcqdmcy57/2015-6-17_14-49-45-570.BMP?dl=0

i tried using drop box to upload a pic but , the extension isnt allowed, https://www.dropbox......com/s/ly203pytwf4kn08/2015-6-15_20-7-57-910.BMP?dl=0

thanks for your reply, i agree with you about the lack of connection, it was all fine before the update, I do have all the tweaks suggested applied in my cfg. NGX is normal in all views. I will upload a picture of the issue

hey good day all, I am sorry if I have posted this in the incorrect resource forum but i dont know where to start. Recently after updating my NGX, I noticed my water became the same color as the sky in FSX, it has not corrected even after deleting the shader cache and allowing it to rebuild. also reinstalling new REX textures or FS water configurator textures has not helped. I dont know if its related to updating the NGX, Any suggestions are welcomed i Would hate to have to reinstall my FSX I use FSX NGX REX texture direct ORBX global and vector OPUS FSWC

hey all, thanks for all the input however no resolution to my problem as yet. I ave places LatinVFR MKJP above all the ultimate terrain entries in the Scenery Library, (MKJP is just below the ORBX global entries), i Renamed the APX27250.bgl to .bak and I also disabled MKJP in the "Terrain" " Modify status of repositioned airports" in the Ultimate Terrain interface to no avail. I have also reinstalled MKJP with no luck. Hope there is a solution

Hey I don't have vector installed. Just ORBX global and ultimate terrain tropical America ands Caribbean. The problem disappears when the ultimate terrain addon is disabled. Hey I don't have vector installed. Just ORBX global and ultimate terrain tropical America and. Caribbean. The problem disappears when the ultimate terrain addon is disabled. Hey I don't have vector installed. Just ORBX global and ultimate terrain tropical America and. Caribbean. The problem disappears when the ultimate terrain addon is disabled. Hey I don't have vector installed. Just ORBX global and ultimate terrain tropical America and. Caribbean. The problem disappears when the ultimate terrain addon is disabled.

Hey Ray, yes I have place the MKJP higher than the ultimate scenery in the scenery library to no avail

good day all, sorry to resurrect this post, but i was searching online for a solution to my airplanes appearing below the runway at Latin VRF MKJP and i stumbled upon this. i tried Jordans fix but it did not work. I did turn of Ultimate Terrain Tropical , and the problem went away (without applying Jordans fix). Is there a solution in which i can keep ultimate terrain working and resolving the runway issue. Any help would be greatly appreciated. Regards

well ive kept it quite simple reducing all the sensitivites on on the FSX control config an the logitech profiler to the lowest level. this has completely eliminated all the erratic control surface movements! thanks very much for the advice!! really imprved my sim experience!

Hi all, recently ive encountered the abrupt crashing of windows desktop manager on starting FSX. Im running windows 7 64bit. I did a couple of online seaches but they came up with nothing. Any ideas or solution will be greatly appreciate as this may be contributing to a decrease in perfirmance.

Caribbean Airlines! Favourite airline! It's my home airline here in trinidad!

Hi good day all. i was hoping someone can point me in the correct direction of calibrating my logitech xtreme 3d pro joystick via FSUIPC 4 for the ngx as the response from the joystick is just plain awful. all turoials ive read about have left me with fully deflected rudder and extremely sensitive controls. obviously ive been doing something wrong. any help would be greatly appreciated

Thanks will try this now!!

hey all, i recently uninstalled my ngx to resolve an issue that wasn't dissapearing with restoring the original cfg, an in the process i forgot to remove the installed liveries from the livery manger.On nstallation of the ngx , sp1c , I tried to install the caribbean airlines livery an was given this mssg " the texture folder already exists, please enter a new texture folder" any help on possible solutiions will be much appreciated

hey yes im going to see what further tweaks i can make to FSX. thanks many i reinstalled my overdrive texturess completely, not a single blurred texture, load time of 30s :S

Yes i tried different airports on different continents an still the long load time persists and the blurry textures as well. i uninstalled REX essentials an problem resolved. However i used REX overdrive with all my Caribbean scneery addons before an i never had any problems or low frame rates! anyone experiencing problesm with ESsentials?

thanks for the replies so far. Much appreciated. Yes im using HD textures. But at the end of the long load time, some of my textures are blurred. im gonna get ultimate defrag, an post back if their is any improvement. Any further suggestions will be gladly welcomed as this has never happened before REX essentials an is making flying my NGX impossible

hey thanks for the reply i use microsoft essentials as well.. any ideas that could be causing the long load times , as well as the blurred textures , it has only happened since Rex essentials was installed.

Hey guys this isnt a PMDG NGX problem exactly but since this is a very helpful community and i have the NGX instaled (it could be a contributing factor) i have decided to post and ask for help here. i have been experiencing very long load times in FSX to start a new flight.! it usually runs smoothly up till 28% then takes a very long time >10mins.. the problem i think started after installing REX essentials. this never happened before with REX overdrive. tonight i uninstalled my entire FSX and PMDG recoomended , and reinstalled my FSX , REX Essentials an my two latin VFR caribean sceneries an im still encountering the same exact long load time also each time i start FSX, i have to press shift+F12 to engage ENB (which i never had to do before an i cant pan out in virtual cockpit mode to more then .30) an ideas on how to correct any of these issues will be very helpful!

hey im gonna try this . thanks alot for the reply!! Much gratitude

thanks very much for your input, however i am up to date and the brightness change did not work : /

thanks alot for the reply. im gonna check it out an see if it works!

im having a problem with my FMC display. my fmc only apppears on the right side...not on the captains side. however while setting up the fmc for flight, i get a message on scrtachpad saying "double FMC OP Restored" however it still doesnt appear on the left side. Any idea as to how to resolve this issue? regards