eliott3

Good evening. So if I understood correctly, I run Linda first and then the MSFSwithFSUIPC7.bat file. Do you think of integrating Linda into the launch of this famous file or will we have to stay on this order LINDA => MSFS with <Fsuipc? Thanks anyway for all your hard work Christian

Hello, Fsuipc has switched to a paid version and is launched at the same time as FS2020. So when I then run Linda .... MCPCOMBO not active. I must first run FS2020 on my own (without the shortcut to Fsuipc) then Linda then then Fsuipc. Approach which was the one you recommended with the beta version of Fsuipc. Do we have to do another maneuver with the shortcut FS2020 + Fsuipc launch at the same time? Thanks to a reponse FCY ISA Christian

Hello. my problem is solved (at least I hope) and I found the actions of the MCP combo 1 to P3DV4 (except for the majestic q400 (but here I think it is rather the config file of the plane for Linda who is at fault). What happened ? I installed Rikoo planes with automatic installation. That changed me the default situation at the launch of P3DV4 and I was entitled to the message "vehicle initialization has failed for dr400 - HOM". I struggled to turn this message. 1 - On the internet, I found => delete Lockheed Martin files ► Prepar3D v3 simobjects.cfg and Roaming ► Lockheed Martin ► Prepar3D v3 VehicleFavorites.xml 2 - I uninstalled the recently installed Rikoo planes But even after that, I still had the msg "vehicle etc ..." when launching P3DV4. And at the same time the functions of the MCP combo1 transmitted nothing or so little towards the panel of the chosen airplanes. 3 - I had an illumination and I changed the default flight by putting a base plane And there, miracle: 1 ==> I no longer have the message "vehicle ..." and especially 2 ==> the MCP combo1 modifies the panel of my planes in P3DV4 (in short as it worked before this summer); I re-regulate the radio, the heading, etc ... (except for the majestic q400, but then I think it's more the config file of the plane for Linda who is to criticize). Would it be the chance or it is these files to regenerate and this default flight to reconfigure that would block me some of the links between Linda and P3DV4? Christian FCY-ISA Cyberavia Pilote (and who speaks and writes very bad English)

Files sent. Sorry and thank you for your patient Christian

Hello. The "enable" checkbox was and remains checked in Linda's MCP Combo setup. I send you the 3 files concerning the 3 planes that I use the most in P3DV4. As well as the file modules \ linda / aircrafts / mjc8q400 / actions.lua I do not know how to put attached files in the avsim forum so I send you the link to my dropbox for a RAR file. Sorry https://www.dropbox.com/s/2db70geqixp26nx/Linda.rar?dl=0 Thanks Christian

Hello - updated Linda made => 3.0.8 - Fsuipc => 5.140 I send you the 3 files tracing the manipulations, namely: - launch of P3DV4 then Linda with pmdg 737 - heading and altitude settings by mcp => Ok on the panel of the plane in P3DV4, settings com1 or nav1 (ADF) => the numbers on the combo scroll but the value comes back always to that indicated on the panel of P3DV4 - launch of P3DV4 then Linda with the Carenado c337 - heading and altitude settings => no movement of heading or altitude settings on the panel of the aircraft in P3DV4, com1 or nav1 => the numbers on the combo scroll but the value always returns to that indicated on the panel of P3DV4 - launch of P3DV4 then Linda with the Majestic q400- heading and altitude settings => nothing move on the panel of the plane in P3DV4 whatever the button of the mcp that I touch, Thanks Christian

Hello. I fly with P3DV4 + opus (for the weather) and Linda to communicate with the MCP Combo 1.I created or completed aircraft profiles and everything was OK. Except that this summer, I had updates (for example of my antivirus, etc ..) and since I have certain functions of the MCP that no longer trigger action in P3DV4. I went to check that Linda was well configured => it's OK.These malfunctions occur on some profiles for example with my profile pmdg 737 I can change the heading but if I put the baron 58 with the profile beech_baron, the heading button is inoperative. Similarly some aircraft and profile, I can not directly with the combo change the frequencies of com1, com2, nav, etc ... I can scroll on the Mcp screen the frequencies but they immediately come back on this screen to the value displayed in P3DV4. Whereas 1 month ago everything was ok. My MPC combo is ok because I always have FSX on my computer and everything is still ok. I tell you that under P3DV4, I use Linda 3.3.724 Thank you for your help

Good Day. I do not have all my existing planes in P3DV4 in the list cameras / list cameras for a specific aircraft type? For example the legacy of realAir compatible P3DV4. So I can not affect them from camera view. Do you have an idea ? Thanks Eliott3

Hello. So I followed your advice and I created a specific module for the pmdg 777 for the combo1. It works very well. He is at the disposal of who wants. Thanks anyway for your advice.

Hello, I have the PMDG_777_v_1_3_2 . And in this version, I do not have a file "config-mcpX.lua". after launching P3DV4 and launching Linda. I have as files in modules / linda / aircrafts / PMDG 777 the files actions, ident, neueres script, pmdg_777X_SDK_Nummern, user and in modules / linda-cfg / aircrafts / PMDG 777 the files config-hid, config-mcp, config- user and in the folder Backup I have the file config-mcp-1712041839. To read you; Thank you

Hello. Has anyone ever been able to use PCP COMBO 1 or 2 to fly the PMDG 777 under P3DV4? And if so with which module linda because the PMDG_777_v1_2 and the PMDG_777_v_1_3_2 gives me the opportunity to adjust com, nav but buttons heading, speed, alt, etc ... of the combo are inoperative. I have version 3.0.3.724 of Linda and everything is ok with for example the PMDG 737NGX under P3DV4 Thanks to a reponse Christian

Hello. I pressed the orange button "synchro" and the module PMDG777 is displayed well in linda

Hello, I just went under P3DV4 and I bought the PMDG 777. But the profile I found on the forum for Linda => the PMDG_777_v_1_3_4 does not work. Is there another profile? I am under Linda 3.0.3 64bit and everything works fine for the PMDG737. thank you for your reply Christian

After having contacted you by email and sending the requested files, I have thanks to your information to solve my problem of connection between the MCP Combo1 and Prepar3D_V4. Now I have: - FSX + saitek x52 + MCP COMBO1 => ok - Prepar3d_V4 + saitek x52 + MCP COMBO1 => with 1 linda configured and different for each simulator. Thank you for your prompt response, your kindness towards my English very "French" and thank you for allowing us to use LINDA.

Hello. For many years, I use Linda V1.1.3 to fly under fsx with the MCP combo 1. It works very well and thank you every day !! I go under P3D_V4 and would also like to use Linda but in the compatible version so not the 1.1.3. Can I install another version of linda on my computer? So I would not touch my configuration fsx-linda and I would have a second config prepar3d_V4-Linda. Thank you for your reply. Christian FCY-ISA pilote Cyberavia