MjTom

I can see two blue-round and two blue-white-long lights 1. FSX ---> set Pause 2. Snipping tool (you can find in: C:\Windows\system32) 3. cut out the segment you want and save as jpg-file 4. upload with par example: directupload.net 5. copy the URL and paste it in "Image" sorry, I´m from German....can not explane such things understandable.

Hallo.... all lights at LOWW are very dark and I have two kinds of "blue" lights. blue and round (taxiway L, only on side of RWY 11-39 and the others) blue-white and long (taxiway M) hope you can see in the picture....live is more coloreful do you have testet the new file from Steve??

Aerosoft EDDS: :yahoo: Aerosoft EDDF: :yahoo: FlyTampa LOWW: :yahoo: Aerosoft LSZH: the airport lights looks good, no black lampshade (but I must test again, other incorrect effect) @Steve: :im Not Worthy: ....thanks a lot, FSX is newly born

EDDW RWY 09 ILS-Approach....daylight.......10NM: lights on switch to twilight:

I have 4 saved testflights........can you see the very nice papi and runwaylights? that´s EDDP RWY 26L and it works, lights load 8 NM before airport :Big Grin: :Big Grin: EDDK RWY 14L the same...... I´m testing more......it looks very good!! @Steve: :Applause: :Applause: ...low pass EDDK RWY 14L......lights load 10NM before airport....no flashing lights, all looks veeeery good!

next situation: I disabled the DX10 Compatible Lights. Now, runway and papilight load at 10NM to airport 7,5NM inbound airport, the lights beginn flashing until to touchdown (lightfield.bgl copied in scenery and no ballastlights)

some idea, why the lightfields fail to load ? ok....you are quicker with awnser :rolleyes:

I tested a lot off Airports at Day and night with and without AI-Traffic. no AI-Traffic: flashing or no papi and runwaylights. AI-Traffic switched on in FSX: the lights works well. AI-Traffic 100%: Lights always works in VC. AI-Traffic 50%: Lights works always until the half runway, then they come off (I think no more AI in sight). Ai-Traffic 0%: no or flashing lights, mostly off. I need something around the airports, whitch simulate AI-Traffic. Huston....I have a problem!

short summary: - you know the problem - you can reproduce the problem So I have hope, you fix that problem :rolleyes: great job, thanks

sorry....english is not my passion. In school, nobody was able to interpret my english. I hope you mean that: papilights and the bright blue light don´t automatically activated inboung 10NM the airport. I must refresh scenery-library with the lightfield.bgl in the separate scenery area to activate papi and bright blue lights. If the second light is another Airport.....I will check but I need some time for it. Yes....all my Aerosoft-Airport have activated AES

the original blue lights (Taxiways) are very dark, so I can see very late......but they are on (after refresh scenery)

...same flight again to EDDK 1. start FSX and I can see the blue light (Picture 1, first flight) 2. no bright blue light and flashing lights 10NM inboundpp airport (Picture 2, first flight) 3. low pass and I turn arround to EDDK 4. nothing happend, no bright blue light and only flashing airport-lights 5. I refresh scenery-library and the airport have a bright blue light and papilight are always on (Picture 3) 6. behind aircraft is a second bright blue light (Picture 4) Picture 3 Picture 4

....done when I start FSX 15NM befor EDDK, I have a bright blue light (it´s not the airport) Picture 1 then, 10NM befor EDDK, nothing....no lights Picture 2 then, I refresh the scenery-library.....yeah, blue party in EDDK

here it is: NUM_LIGHTS=8 more Input: I create another folder with the Lighftfield.bgl an put it in the scenerie-library (DX10 papi Lights) When it is enabled, I can see all Lights all the time. when this folder is disabled, flashing lights What´s the problem: The lights only works, when I stop FSX and refresh the scenery-library. so I think, the lightfield.bgl in airport-scenery don´t work.....no download, when airport comes in sight (10NM)

this procedure was already done......lights are flashing it will be the first time, that something don´t work in my FSX

EDDK - flashing lights night, lights on: switch to day, lights on: 2 seconds later: no lights switch to day: EDDP is the same...lights on-off-on-off I can test it on other airport, if it helps......

Hallo ..... I always have problems with the lights using Aerosoft-scenerys. So I will test other settings step by step to fix them. for example: - outside cockpit all lights looks good...inside VC-cockpit no light - flickering runway and papilights......and so on ....so let´s start! 1) This 2 files found in the DX10SceneryFixer-bgl-folder: XXXXLightFieldTest. XML-File XXXXLightField. XML-File Questions: must I do something manual with this files.....copie in the FSX.cfg for example or something else ? ------------------------------------------------ 2) This 5 files found in the DX10SceneryFixer-Effects-Folder: ballast. FX-file fx_dx10field. FX-File fx_dx10fieldtest. FX-File fx_dx10shield. FX-File fx_dx10shieldtest. FX-File Question: I copied this files in the FSX-Effects-Folder.......that`s correct? -------------------------------------- 3) When I add the ballast lights in my PMDG 737NGX, I can find it in: G:\FSX\SimObjects\Airplanes\PMDG 737-800NGX WL\aircraft.cfg [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin light.0 = 4, 47.000, 0.0, 5.500, fx_PMDG_NGX_vclight light.1 = 4, 45.500, 0.0, 4.500, fx_PMDG_NGX_vclight light.2 = 1, 00.000, 0.0, 0.000, ballast Question: that`s all correct? --------------------------------------------- 4) DX10 Compatible Lights: enabled or disabled? ---------------------------------------------- 5) V2.0 Lightning Rules: activated or not ? ------------------------------------------------- 6) DX10 Compatible Reflections: enabled or disabled? ------------------------------------------------- I never will play FSX without the DX10Fixer, but this problems make me crazy! sorry for bad english....50 years old "child" fly arround the world ^^ thanks and .....so long

Hallo, Behind the Air Berlin you can see dark or grey smoke. In this smoke is another B738. I will test the new V2.0 lightning rules

Hallo, positiv effect: - all vehicles in EDDS-Aerosoft airport are now colored and not grey other effect: for example, an IVAO-Aircraft is in a big cloud of smoke ....so long

...the same problem as Webmaximus at EDDG (Aerosoft) 1. all looks good (only the light field folder in scenery library) 2. after touchdown no lights and I stopped FSX (pause) 3. then I refreh the scenery library and all lights (the blue and red) looks good 4. after the refresh I can do wath I want....the lights are shining in all possible views

EBBL - EBBR: no lightfield.bgl in airport scenery, only the folder with all light fields in scenery library the papilights slowly appears on right side of RW all looks good ...no problems with EBBR

I think, everybody must test itself. I have no drawbacks with using one folder in scenery library. I also testet twice....light field in airport scenery + light field folder in scenery library....no difference, exact the same AEROSOFT <----that´s the problem, all the others work great

My last perception: There is no difference between each single "light fields.bgl" in the airport-sceneries or one generate scenery folder with all "light fields.bgl" in the scenery library. This new folder is on second place behind AES. RAAS, wrongdoer for all problems......that´s a new approach! I also use RAAS and Make Runway.

I also have much problems with DX10 and Aerosoft. no lights ---->then I refresh the scenery-library ----> lights on EDDV - winter scenery - no lights after refresh the scenery I can see the papilights: and the same switches in night-modus: ...it makes me crazy !