winstonwolf

Can it be that P3Dv5.1 dont support anymore the Vsync Options from Nvidia Controlpanel ? In the earlier Versions i use Tripplebuffer , Locked 30 FPS and Vsync Adaptiv 1/2 Refresh Rate in Nvidia Control Panel and in Sim no vsync and unlimited FPS. So i can play Smooth with my 60 Hz 4K Monitor without Stutters. Locked at 30 with Vsync 1/2 Refresh from 60 Hz was also 30 and therefore an smooth flying. When i try any Vsync Setting in Nvidia Controlpanel now with 5.1 i have strong Screen Tearing in Sim. Does anybody else use my Nvidia Settings ? Thanks for Feedback . Full Screen Optimization is disabled . Now i have the Problem that when i use my Settings the Sim runs perfect and Smooth but i have this Screen Tearing when i use the "right Mouse Button" Look around . I have not Tearing when i dont use Vsync 1/2 Refresh Rate but then my Sim Stutters because of 30 FPS in Game but 60 Hz Monitor . Any recommendations ? Thanks

Hi there , What can be the reason that when choose SODE Jetways , the Sim crash at 77% where AI Traffic loads normaly ? I check all the Flightplans and AI Models . No Problems . Michael

I explain what i do befor the Problem comes . I want to test the AI Light Settings in Sim . I choose in AI Lights the Preview Settings but the sim was not open at this point . I become an Error Message that the Sim must run for this Option . After this Point i have the problems . Now i can say that when every kind of AI Traffik ( bgl ) is active it is only possible to start the Sim with the default Airplane with the default Airport . Then i chan change to the other Airport or Plane and i see the AI Traffic . With no AI Traffic activated i can start the sim with every Plane at every Airport . With AI Traffic activated and i choose an special Plane at an special Airporrt , i become an CTD at 74 % Loading AI Traffic Controller . Michael

Hello , I try to load AI Lights P3D Plane Config but sim was closed at this Moment . Then i try to start the Sim but now every time the Sim Crashed to Desktop at 74 % when the AI Traffic Control loads . Thanks for help Michael

Hello , I use the 747 Immersion under P3Dv5 HF2 and i dont like the Style from the Contrails . The Contrails looks like small round clouds . Like Balls . But in real it is one line . I try already the different Settings in Immersion Manager . But without success . Here an original Picture : And here an Screenshot from Sim : Is there any Solution for this ? Thanks Michael

Hi , Thanks for the fast Info . It means sit and wait 🙂 Michael

I use AI Lights Reborn Professional Edition. After the Check the Program gives me the Info that on some AI Models the Stobe Lights are Missing or the Beacon Lights are Missing. Ont the two FSPXAI 737-max 8 and 9 Models AI Lights Reborn Professional Edition tells me that they are not supportet. Is there an simple way to solve this issue ? Thanks Michael

Which with Setting in Tomato i can increase the light of the Cloud Shadows . Here one Picture with cloud Shadow and one without cloud shadow . I personally think it is too dark for me when i receive the Cloud Shadows. In PTA there is an Setting "Cloud Shadow Depth" but i cant find it in Tomato. Thanks Cloud Shadows Setting in P3D.: Without Cloud Shadows Setting in P3D:

Hello, When i try to apply an preset with the PTA 2.61 Tool on my P3Dv4.1 then i become the following errors : Applying preset D:\PTAv4\MattDavies1.3.ini... Applying [Reduce cloud brightness at dawn/dusk/night] to E:\PREPAR3Dv4\ShadersHLSL\Cloud.fx Applying [Clouds shadows extended size] to E:\PREPAR3Dv4\ShadersHLSL\Cloud.fx ERROR applying tweak [Clouds shadows extended size] Problem with patch #0 - Patched block not found. Applying ["No popcorn" modifier] to E:\PREPAR3Dv4\ShadersHLSL\Cloud.fx ERROR applying tweak ["No popcorn" modifier] Problem with patch #0 - Patched block not found. Applying [Turn off clouds directional lighting] to E:\PREPAR3Dv4\ShadersHLSL\Cloud.fx ERROR applying tweak [Turn off clouds directional lighting] Problem with patch #1 - Patched block not found. Applying [Clouds Fog tuning] to E:\PREPAR3Dv4\ShadersHLSL\Cloud.fx Applying [Cirrus lighting] to E:\PREPAR3Dv4\ShadersHLSL\General.fx Applying [Objects lighting] to E:\PREPAR3Dv4\ShadersHLSL\General.fx Applying [Autogen emissive lighting] to E:\PREPAR3Dv4\ShadersHLSL\General.fx Applying [Sky saturation] to E:\PREPAR3Dv4\ShadersHLSL\General.fx Applying [Terrain lighting] to E:\PREPAR3Dv4\ShadersHLSL\GPUTerrain.fx Applying [Urban areas lighting at night] to E:\PREPAR3Dv4\ShadersHLSL\GPUTerrain.fx Applying [Terrain saturation] to E:\PREPAR3Dv4\ShadersHLSL\GPUTerrain.fx Applying [Water surface tuning] to E:\PREPAR3Dv4\ShadersHLSL\GPUTerrain.fx Applying [Waves size] to E:\PREPAR3Dv4\ShadersHLSL\GPUTerrain.fx Applying [Rayleigh scattering effect] to E:\PREPAR3Dv4\ShadersHLSL\FuncLibrary.fxh ERROR applying tweak [Rayleigh scattering effect] Problem with patch #1 - Patched block not found. Applying [Sky Fog tuning] to E:\PREPAR3Dv4\ShadersHLSL\FuncLibrary.fxh ERROR applying tweak [Sky Fog tuning] Problem with patch #2 - Patched block not found. Applying [Waves speed] to E:\PREPAR3Dv4\ShadersHLSL\GPUTerrain.fxh Applying [Turn off HDR luminance adaptation effect] to E:\PREPAR3Dv4\ShadersHLSL\PostProcess\HDR.hlsl Applying [Alternate tonemap adjustment] to E:\PREPAR3Dv4\ShadersHLSL\PostProcess\HDR.hlsl Applying [FXAA quality] to E:\PREPAR3Dv4\ShadersHLSL\PostProcess\FXAAResolve.hlsl Applying [Tweak main config (prepar3D.cfg)] to Main config file Preset has been applied with errors. See log above Shaders cache cleared Thanks for Help. Michael

Hello , It was my mistake . In the Top Down Sight you can see the PTA Settings . I switch to 3D Cockpit view and then i see the different. Do you now where i can take Settings to become the Ground a little bit darker ? Thanks

If I change in the PTA tool, in my case "Terrain Lightning" and press "Apply" then in P3D happens exactly nothing. Have it tried with the highest and the lowest value. ShaderCache was also cleared. What can be the cause. Here are two screenshots around Munich. Would like to bring the Ground a little bit darker. I wanted to do this with Ambient sunlight ratio and Diffuse sunlight ratio. Am I doing something wrong ? Thanks in advance Befor : After : Thanks for help. Michael

Hello , My Ground looks like this : Is it possible to set the PTA Tool so that the Ground becomes a little bit greener . I dont like the yellow Fields . Is it possible to change the yellow Fields in more green . Thank you Michael

Hello , In my P3Dv3 all looks a little bit too much blue with the PTA2 Tool and the Tophat 1.5 Preset. What Option should i reconfigured for changing this and become an good relationship between green and blue ? Can someone sent me his Settings for "Haze Effect" and "Rayleight scattering effect" Thanks Michael

Hello, I Use REX Softclouds for Low Level Clouds and REX Texture Direct for the High Level Clouds . I use PTA2 Tool for creating shaders . But now my Clouds looks like the Photo . I dont want this small Comic Clouds . What can go wrong for this ? Witch the default PTA.ini it look so : Therefore i think it has to do with my preset . What can be the reason for this "round" clouds from Picture 1 ? Thank you , Michael

Hello , I search an good PTA2 Preset which works good with REX Softclouds ( Low Level Clouds ) & REX Texture Direct ( High Level Clouds ) . I also use ENVTEX for the Rest . As Weather Tool i use AS2016 . Thanks

Hello , Im not sure if i am here right . Im very frustrated . I uses till yesterday ASN + ASCA and PTA . My Clouds till yesterday looks like this : Then i uninstall ASN and install AS2016 . And now my Clouds looks like this . Totally Bad!!! Can PTA help me to solve the Problem ? The ASCA Clouds are the same as under ASN . Thank you Regards Michael

Hello , I use the undock Funktion from FSTramp inside my P3Dv3 with an second Monitor on my Graphic Card ( GTX 970 ) When i open the undocked FSTramp Windos on the Second Monitor the P3Dv3 stutters very bad . When i close the FSTramp Windows on the second Monitor the the P3D runs smooth. Can it be an Graphiccard setting ?! Thanks for Help Michael

Hallo Hans , Danke für die Antwort . Könntest Du mir das auf deutsch nochmals erklären :rolleyes: Danke

Hello , Today i see that all the Planes on the RG Flights LOWS Scenery are on wrong Parking Positions. They stand too much in front of the Position in the Scenery . I can remember that there is an solution for this Problem . The change of the AFCAD File brings no Changes in the Game. Thanks for help .

Hallo , Hab mal wieder meinen guten alten FS2004 gestartet und bemerkte das auf der RG Flight LOWS Szenerie alle Flugzeuge auch mein eigenes vor der angezeichneten Bugrad Position stehen. Es sieht so aus als ob der Mittelpunkt des Flugzeugs über der Markierung am Vorfeld steht. Ich dachte da gabs mal eine Lösung dafür. Kann sich noch jemand erinnern wie das war ? Anbei ein Screenshot. Vielen Dank Michael