FlyingEngineer

Worked

Thanks for your quick answer. I will try it with Ezdok

Hi, I installed the Dash 8 on my new P3D Setup. I noticed that the Wing Views of the Aircraft come with the whole cabin. Is there any way to remove the cabin in order to see only the Wing/Engine without the cabin windows? I have installed the latest patch. Thanks in advance

Ground Textures are set to 1m on my system. When using REX Textures I always set them only to 512. I also get my OOM's when changing the view. On my system Prepar3D does not clear RAM anymore when more Addons are installed. I always take off with VAS of 3100MB. The Problem is that P3D does not clear it during the flight. It stays stable with 3100MB. When reaching another addon airport it needs additional 400-500MB. Thus, the best solution would be in my opinion that VAS is cleared during the flight on a higher altitude.

First of all, thahk you all for your help. I was really desperated due to the high VAS usage. I loaded the default P3D Vehicle (Jet) and Mega Airport Frankfurt V2. ORBX FTX Global and OpenLC were activated. Default Cloud and Sky Textures were used. Lod Radius set to low, all traffic was set to 0%. At the beginning I had a VAS of 1860MB, after a few minutes it went up to 2100MB. After taking of and waiting about 20 minutes VAS stayed stable (2050MB). Is it normal that P3D does only clean up 50MB when leaving the Airport. Why does VAS does not decrease to the initial value (1850MB)?

I will try it without Vector. I actually have only installed the above mentioned airports at the moment. I did not tweak the cfg file and road traffic is also set to off since users reported higher VAS usage with it. I set the Lod Radius to LOW and reduced the Autogen Sliders to DENSE. I'm going to do a test flight and report the result.

Thank you for your quick reply. I didn't try the same situation with version 3.2. Is it neccessary to reinstall whole P3D or is it sufficient to reinstall only the Client?

Hi, I did several flights and was not able to manage it to complete one without an Out of Memory. I'm using Windows 10 and P3D v3.3.5. Installed Addons: --------------------- ORBX FTX Global ORBX OpenLC EU ORBX Vector (only highways and golf parks are activated) REX 4 Texture Direct with Soft Clouds Aerosoft Airbus A320/321 FS2Crew for the Airbus AS Mega Airport Frankfurt v2 / FlyTampa Vienna X \ AS Heathrow Extended FSUIPC, SimConnect ActiveSky Next SP5 PRO ATC/X When I load the Airbus and choose Frankfurt VAS is about 2650 MB. While performing all checklists and preparing the aircraft for takeoff VAS goes up to 3100 MB. After taking off it continues to increase up to 3300MB. When reaching the cruise altitude (34000ft) it stays with 3250MB. P3D does not clear the VAS. While approaching I'm reaching the limit of 4GB VAS and the error message appears. I also did other flights with the same result. How do you manage it to finish a flight without a OOM. Thanks in advance

Thanks for all the answers. I'll wait until the ASUS GTX 1080 Strix is available at my country. But my biggest problem is VAS at the moment (see other topic).

I could fix the problem by uninstalling the ASUS Sonic Studio Components (part of the audio driver). Thank you very much Bryan. Best,

Hi, I'm using the newest version of FS2Crew (v2.3), but when I press the "Voice" Button on the FS2Crew Main Panel P3D freezes and after waiting few minutes an error message appears that P3D has stopped working. I already reinstalled whole Windows 10 with LM P3D I hope someone can help me.

Thanks for your answers. I will wait until other user reported their experience, but I think I'll buy it. However, here are my Hardware Specs: i7 6700K up to 4,2 Ghz (not overclocked) Corsair Dominator 2666Mhz ASUS GTX 770 (not overclocekd) 1000W Power Supply 256GB Samsung Pro 840 SSD

Hi, I have become a big fan of LM P3D. Now I consider upgrading my Video Card. Especially when I have more than one cloud layer and cloud shadows activated the frames per second drops dramatically. I wonder whether the GTX 1080 could improve my performance (up to 10FPS). I already read lots of benchmarks of the card, but can P3D use the (whole) capacity of the card? Some users reported that upgrading from a 770 to 780 or 970 to 980 does not improved their performance. That is why I am asking. It would be great if GTX 1080 owners could report their experiences. Thanks in advance

Hi, I just wanted to ask if there's a Program which is similar to Real Terra Haze (X-Plane only) for FSX. I already read some topics about the same question but does Active Sky Next and Mogwaisoft fsx shade really help ? I already use REX 4 Texture Direct and Reshade FX, but I couldn't get the blue Effect like the one of Real Terra Haze yet. Here's the link to the Real Terra Haze Site with Comparison Images for better understanding what I mean: http://forums.x-plane.org/index.php?/files/file/22387-real-terra-haze-for-flywithlua/ Is it possible to have such a effect in FSX ? Thanks in Advance

Is there a huge Fps Difference between the Gtx 980 and 970. The Gtx 970 is cheaper (350$) than the 980 (>450$). I watched some YouTube Videos showing the fps using a Gtx 980/970. There was a difference around 20 FPS. But does anyone know the Fps difference between These two cards in P3d?

But what would be more effective? Graphic Card or Processor?

I managed to get it work now. I found out that the first Beta Version of Reshade solves the problem. Thank you all for your help.

Hi I consider upgrading some components of my PC in order to get more frames in P3D v3. My PC System: i7 4770K @ 4,3Ghz GTX 770 OC Screen Resolution: 1680 x 1050 DDR3 1366 Windows 7 Ultimate 64bit Is it worth upgrading my Graphic Card (GTX 970/980/980TI)? Or is it better to upgrade my Mainboard in order to use the i7 6700k and DDR4 3000+ Ram. Which component(s) should I upgrade? Thanks in advance

@ pilot 83 Which version of Reshade do you use? Which Graphic Card and Driver do you use? I also tried Reshade on my System but FSX keeps crashing during the splashscreen Thanks in Advance

I bought Steve's DX 10 Fixer and followed your instructions. But it still does not work. Any ideas? Maybe a Graphic Card Issue?

Hi, I read about Reshade FX and wanted to try it. But it doesn't work. I followed the instructions in the readme file of Reshade. But when I start the sim an error message appear due to the dxgi.dll. When I remove the files of Reshade everything works fine. I hope somebody can help I have Windows 7 x64 Ultimate SP1; NetFramework 4.6 and the Direct X Runtimes installed. My Graphic card is a NVIDIA Geforce GTX 770.

I made a few flights with the Command "Set 60 Percent" and today the issue I had yesterday did not appear anymore. I didn't change anything concerning my system. I'm going to make some more flights and report when the issue appears again. Happy Landings

I started using the Level-D 767 with FS2Crew. The Problem is that the check issue appears every time I fly. I've reinstalled several time both the LVD-767 and FS2Crew with the SP1(I redownloaded it). But the issue still exists. It always happens after the "Set 60 Percent" command. The FO calls 80 knots and after takeoff FS2Crew only recognizes "Check". I also tried to deactivate/activate the Voice Button of FS2Crew several times without any result. I hope you can help me.

I switched Pilot Controls Aircraft Lights on, but the problem still exists Any other idea?

No havn't checked it. I will try it as soon as I have access to my "FS-PC" and I write back wether it works or not.