Tlgoose

Hi I have just installed FSX-SE and have added numerous WOAI Aircraft. I checked the directory C:\Program Files (x86)\Steam\steamapps\common\FSX\SimObjects\Airplanes and all of the aircraft are listed. Does anyone know why these are not showing up when running FSX_SE??? Any help would be greatly appreciated. Thx, Thomas

Thanks for the reply. Take care, Tom

What determines the refresh rate or distance objects start to appear in the distance for scenery? Is it Ram, CPU, Video Ram??? I find that my scenery starts to appear about 3 Miles in front of me whereas on UTube some of the videos show scenery almost unlimited in front of you. I seem to have processor power and ram, not sure on the video card. Any help would be greatly appreciated. Thx, Thomas

Hi I was setting up my Ifly B737 and must have set something wrong on my Overhead Panel. I have Saitek Rudder Pedals and they have been working perfectly until I made a change in the Overhead Panel switches. I don't know what I did but now my rudder pedals do not work. If I zoom in in the cockpit to the pedals, I can see the pedals are not moving in the view or in the Spot view either. I was setting the Overhead to shutdown then startup and I must have set something incorrect. I have reset the rudder command in FSUIPC but nothing works. Any help to fix this problem would be greatly appreciated. Thx, Thomas

Have not been on for a while. Thanks Gerry, much appreciated Tom

Hi I am trying to find where the Fuel Cut-Off Switch command is in Fsuipc. I am trying to set up some switches to turn them on and off. Any help would be greatly appreciated. Thanks, and have a great day. Tom, Oakville,Canada I know the switches are right below the throttle leavers. Just not sure where the command line is to turn off and on.

Hi Again I just ran FSX again, went to Add-ons and opened up FSUIPC. I went to button & switches and saw that FSUIPC recognizes my VRi Panel as Joy #286 and recognizes any button or rotary knob that I access. I see that the Linda Console and the FSUIPC4.log file are still looping and I can not change any setting on the monitor screen even though they all change on the VRI MCP. Not sure what to do now. Tom

Hi Again I just checked the FSUIPC from FSX Add-ons and see that FSUIPC now recognizes mr VRinsight panel as Joystick #286 and will recognize each button on the VRi panel that is pressed. I'm not sure what to do next. Getting old and tired I guess and have to take a break. Again, Any nelp to be greatly appreciated. I think we are close. Thx, Tom Oakville, Canada

Hi Guys I found that I forgot to rename the .default files to .lua files in the modules/linda-cfg/aircrafts/PMDG 737NGX directory. I made changes and now the VRi Panel is working. The diplays indicate SPD,HDG,ALT,VS and the COM and EFIS work when you depress the keys or rotary knobs. The correct Linda settings for the PMDG 737NGX now come up and match my VRi panel. The only thing that is not working now is that you can set all the setting on the VRI panel but nothing happens on the monitor screen in the cockpit. I notice the the Linda console is stuck in a loop and is continuously running as I previously mention in my last post. It goes from "waiting for an event..." to "Timer evernt: calling "hidpoll" ...". I noticed in the FSUIPC4.log that it also appears to be stuck in a loop. Looks like getting close. Any ideas would be greatly appreciated. Thx, Tom Oakville, Canada

Hi Guys Working on the VRinsight MCP now. I found that I forgot to change the file names in the Modules/PMDG 737NGX from .default to .lua. Made that change and reran FSX and Linda. I am now getting the correct Linda settings for the PMDG 737NGX and my VRi module is indicating a lot of the displays. I have the SPD,INFO,HDG,ALT ANd VS. The display changes on the VRi panel but not on the monitor screen. The COM section and the EFIS all have the correct controls when I depress the buttons or turn the rotaries. I see the Linda console is stuck in a loop, continuously running. The loop appears to be running in the Flight Simulator X\modules\linda/system/events.lua: XXX area. XXX being a numeric value IE: 428. It apprears that I am close to getting this running but not sure what is causing the last part of the problem. Hope Someone can help. Thx, Tom

Hi, Sorry I was away for a while. I installed my Vrinsight Boeing MCP panel and am still trying to get it working. I load up FSX, and when Linda loads I check the Linda main screen to check the button parameters and it says Module: PMDG 737 NGX, Author: Artem/Guenter/Michel, Version: 2.0, and Date: Jan 2013. My VRinsight MCP panel displays light up indicating SPD, HDG, ALT, & VS. Also the COM1 shows up on the com display. I can press any button or knob on the VRI panel but nothing happens. Also I notice that the Linda console display is constantly running appearing to be in a loop. It goes from trying to LUA.0: Waiting for an event in "C:\Program ,,,,,,,,,/init.lua to LUA.0: ...t Flight Simulator ......../events.lua:436 It appears that my screen showing the Linda Controls and the VRinsight panel are not communicating. I have checked before and the Comm port always gives me the green light and appears OK. As I mention before, I tried the VRinsight software and everything worked perfectly. I would prefer to use Linda as I did before with my Saitek panels. Any help would be greatly appreciated. Thx, Tom Oakville, Canada

Hi I recently purchased the VRinsight MCP Combo II for Boeing and installed the VRi software from their website. Everything works fine. All the EFIS buttons, all the MCP buttons, and all the Com buttons except for the 8 buttons at the top of the Com area work perfectly. Documentation not too clear. Does anyone know where the software file for the VRI software resides so I can edit the buttons? Actually file name and location? Any help would be greatly appreciated. Thx, Tom

Hi I get the Linda working with the MCP Panel. I also installed the software that came with the VRinsight MCP panel and ran it after disabling it in Linda. Using the Vri software everything almost worked. All the EFIS panel and the Com Panel worked. Every button did what it was supposed to do. The center section everything works except for the display window. You can set HDG,SPD,ALT,etc. but all the displays remain at 00000. The displays in the cockpit of the FSX are changing to what you want. Will keep trying other things and let you know. I want to get this to work with Linda if I can. Thx again, Tom

Gregg When you are in Linda and you have selected the MCP Combo, if you select a button or rotary knob on the MCP does it light up the display portion of the screen. When I run my mouse over the HDG knob, it hightlights and the HDG knob input data shows up blue on the screen. if you push the button for HDG on the MCP should the corresponding button light up on the screen?

Hi Gregg I have the paid version of FSUIPC installed. Linda settings all come up green "ok". The plane I am using is the PMDG 737-800NGX WL. When I look at the MCP Combo it indicates a bunch of settings for the aircraft but as I said the MCP Panel is frozen and almost not connected. It comes up with Spd,Hdg,Alt,V/S & Com1 settings but none of the diles or buttons do anything.