domi66

Hello everyone, Quick question, In P3Dv5, with the route planner, sometimes I can drag the route with the mouse to move it over a VOR, for example, but other times it's impossible to move it? If someone could explain why, that would be great. Thanks in advance.

Bonjour à tous, Petite question, P3Dv5, avec le planificateur de route, certaine fois ont peu tirer la route avec la souris pour la faire passer sur un vor par exemple, mais certaine fois impossible bouger? Si une bonne personne peu m'expliquer pourquoi, ce serait formidable. Merci d'avance

Hi Rein, Thanks for the reply. The Simmerhome website seems to be closed and no longer accessible. Therefore, I can't install their photo scenery. Best regards, Domi

Bonjour la communauté des simmers. J'ai téléchargé et installé les aéroports NIGERIA Et ZAMBIE de chez Simmershome. Ces scenery sont pas mal, mais le problème est qu'il y a des arbres sur les pistes, les taxiways et les aires de stationnement. Y a-t-il une solution pour ne plus les avoir. Si quelqu'un à une solution, ce serait merveilleux Bonne sim à tous Dominique

Hello simmer community. I downloaded and installed the Nigeria and Zambia airports from Simmershome. These scenery packages are pretty good, but the problem is that there are trees on the runways, taxiways, and parking areas. Is there a way to get rid of them? If anyone has a solution, that would be wonderful. Dominique

Bonjour les simmers, Je cherche à avoir les datas airports pour le 757/767 CaptainSim, mais uniquement pour DAKAR GOBD Blaise Diagne INTL qui n'est pas dans les datas du AIRAC cycle que j'ai soit le 1706. Je n'ai pas l'intention de payer pour une mise à jour que pour cet aéroport GOBD Je remercie d'avance la gentille personne qui me donnera juste ces lignes de datas que j'ajouterais manuellement. Amicalement. domi66

Hello everyone, I would like to warn the Simmer community about the behavior of SimShack, the site where I purchased scenery. on 19/12/2025 with order #91151. The contact and support email address is: [email protected]. This scenery has been paid for, and the payment has been credited to my account. Despite my numerous requests, it is still impossible to install the scenery as of today, December 31, 2025, because I have still not received the serial number. Flyaway Simulation doesn't even bother to reply. This is unacceptable. I was hoping to receive the activation key before Christmas, but nothing! I didn't know such incompetent and dishonest people existed. I'm not ready to buy anything from them again. Avoid SimShact and Flyaway. Have a great simulation everyone, and happy New Year's Eve! Best wishes for 2026 From France domi66

Fly The Maddog P3D Feux moteurs à chaque décollage? Je ne comprends pas pourquoi? Si quelqu'un à une réponse je suis preneur. Amicalement Domi66

Here I am again, thank you very much for your help. Indeed, after the reinstallation, everything is fine. Thanks again Domi 66

Hello, thanks for the reply. Yes, I have the correct version, purchased at full price from JF, just before it went on sale! I'll reinstall it to see. Still no help from JF. Regards

Hello everyone. I need help with the Just Flight RJ 146 P3D v5.1. I asked the question on their support, but got no response! Someone asked the same question on their forum, also without a response. Also, if anyone has an explanation for my problem, that would be great. Can't retract the landing gear? Yet everything is fine, no lights on, all four hydraulic circuits are pressurized. What did I miss? Thanks in advance for any help. Kind regards. domi 66

Bonjour à tous. J'ai besoin d'aide au sujet du Just Flight RJ 146 P3D v5.1. J'ai posé la question sur leur support, pas de réponse! Une personne à posé la même question sur leur forum, sans réponse également. Aussi si quelqu'un à l'explication à mon problème, ce serait super. Impossible rentrer le train d'atterrissage? Pourtant tout est OK aucun voyant allumé, les 4 circuits hydrauliques Pressurisés. Qu'est ce que j'aurais raté?? Merci d'avance pour une aide. Amicalement.

Hello all, DHC3 Milviz No problem to hide the yoke, but no possible to show the yoke again. No location to click to show the yoke again. OK for DHC3 Turbine. DHC3 Milviz No location to click to show the yoke again ??? Have good time Dominique

Milviz, now called Blackbird Simulation for their civilian simulation section, has finally made all their old creations freeware. Here's the link: https://blackbirdsims.com/flight/freebies.php If any of you still fly P3D, don't miss out 🙂

Hello all, What do you think is the best add-on for a twin-engine propeller, for P3D in a touring plane like the Beech King Air? Thank you in advance for your answers. Sincerely, Dominique

Hi Rogen Thanks for the reply. It's OK now. Dominique

Still no answer for me. I'm using P3Dv5.1. Can you tell me if you have the "ASCRJ Pro 5!PFDC" gauge in the CRJ panel? Because for me, it doesn't exist????? Aerosoft CRJ Pro Base\Panel\ no config, just ASCRJ Pro 5.dll. In all CRJs, CRJ-550 Pro, 700 Pro, 900 Pro, and 1000 Pro, the following is in the panel folder: gauge00=../../Aerosoft CRJ Pro Base\panel\ASCRJ Pro 5!PFDC, 0, 0, 286, 338? So it's definitely the ASCRJ Pro 5!PFDC gauge, which doesn't exist. Gone???? Thanks in advance Dominique

Bonjour à tous. J'ai un problème, quand je sélectionne le CRJ P3Dv5.1 crash retour au bureau depuis quelque temps. Désinstallé, réinstallé, rien à faire. J'ai posé un ticket sur le support, pour avoir de l'aide mais pas de réponse. Même pas de réponse à mes mails au contact aerosoft. Après avoir acheté pour plus de 600€ pour leurs add-on depuis FSX et P3D, voila comment il respectent le client que je suis. J'essaie de comprendre, il me semble que les gauges du panel ont disparues, et ne se réinstallent pas. Voici la gauge qui semble être absente. Pourquoi ?? Mystère "ASCRJ Pro 5!PFDC" Si quelqu'un à la solution, je suis preneur. Dominique

Hi Charlie, Okay, great, you can change the title for me. "Can't Select Milviz Beech 350i" is very good. Thank you very much. Best regards Dominique B👍

Hello, indeed, it was my mistake. How can I edit or delete this message? Thank you.

Hello all, I just tried to select the Milviz Beech 350i, but it didn't work. Here's the message. P3Dv5.1 "The product is either not activated or the activation is invalid. Please contact support" My License Key is:: OK Dominique

Hello everyone. I'm having a problem with the Aerosoft CRJ v2 Pro, with my P3Dv5.1. I've posted a ticket to Aerosoft support and several requests, but I haven't received a response. (P3D customers are probably no longer interested in them.) When I select the CRJ, P3Dv5.1 has been crashing for some time. Before, there was no problem. And no problem with other aircraft. I've uninstalled and reinstalled, but nothing works. Since I don't have any help from Aerosoft, I'm trying to understand. One thing that puzzles me is that in the Aerosoft CRJ Pro Base Panel, there is no config panel, only a DLL called ASCRJ Pro.5.dll. Can't find the ASCRJ Pro 5!PFDC gauge? In all versions of CRJ, for the "panel config" There is: gauge00=../../Aerosoft CRJ Pro Base\panel\ASCRJ Pro 5!PFDC, 0, 0, 286, 338,????? But as mentioned above, in Aerosoft CRJ Pro Base\panel\ there is no ASCRJ Pro 5!PFDC, just a DLL. It's a bit confusing, but if anyone has any ideas, I'm all ears. Thanks in advance. Vidéo: https://youtu.be/4HtACIEDfGM

Hello everyone, New to the forum, let me introduce myself. I retired from aviation as a technical controller for the French airline UTA, which unfortunately no longer exists, then Air France. I'm joining the forum looking for help with simulation and, if possible, to contribute my knowledge. Good luck to all. Thanks to Avsim for everything. You'll have to excuse my English, thank you. D. B