Hammer88

Hi KMAX59, 😀 Thank you very much for your reply and help, that's great.😀 Sorry for the late reply. Thank you very much for the tip, I turned on the ‘SKY 24h’ switch and it worked. I can now select different sky sets from the Sky group. However, I have another problem. I installed a different sunset set to test it and see if it works in P3D. Unfortunately, I found that it didn't work. I did the same tests with the cloud sets, sun sets and sky sets, but these are not displayed in P3D either. I installed different cumulus clouds in ‘ENVTEX’ I installed set 2. I must also tell you that I do not use the tools ‘Aktiv Sky’ and ‘Sky Force 3D’; I only work with ‘ENVSHADE’. Because I use P3D V5.3, I would like to ask you whether ENVSHADE is compatible with this P3D version at all. Question: Do I need to install the Aktiv Sky tool for ENVSHADE to work at all? I would like to ask you what I need to do to make ‘ENVSHADE’ work with P3D without encountering the problems described above. I look forward to your reply. Best regards from Switzerland, Bruno 😀

Good afternoon, 😀 I need your help again. I use Flight Simulator Prepar 3D v5.3, which works without any problems. I purchased the weather tool ‘ENVSHADE’ Link: https://www.togaprojects.com/envshade. I bought all 4 modules. I was able to successfully complete the purchase, download, installation and activation. Unfortunately, there is a small problem with this weather tool, which I will explain to you in detail. I opened the ‘ENVTEX’ module. After starting it, you see the SKY window. In these 6 windows, you can install different weather scenarios, daytime sky, dawn and dusk, etc. The ‘Dynamic Sky Day’ window has a black ‘Random’ button at the top: You should be able to open this button so that you can install the different weather scenarios. The problem is that I cannot open this black button. I have this problem throughout the entire ‘ENVETEX’ module. Now I would like to ask you why I cannot open this black list. What is the exact reason? Do I perhaps need to install the weather tool ‘Aktiv Sky’ so that I can then open this black list? If you also use this weather tool and it works without any problems for you, I would be very grateful if you could tell me how to solve this problem, because otherwise I cannot use this tool. Thank you in advance for your help. I look forward to hearing from you. Best regards from Switzerland, Bruno 😀

Hi Ray Proudfoot (Moderator) I posted something on this forum a while ago. As I no longer need this post, I would be grateful if you could delete it. Member name: Hammer88 Post name: REX Sky Force 3D / P3D (V 5.3) I wish you all the best. Kind regards, Bruno

Hi Zylx, Thank you very much for your reply. I don't have a problem with the size of the moon and the sun; they are in their original state. Changing the light from the moon worked, but not the light from the sun. The post I put on the forum describes my problem in detail. It would be best if you read it again. Best regards, Bruno

Hi SonBrit, Sorry for the late reply, and thank you very much for your feedback and information. It is possible to change the weather in Rex Skyforce. For example, you can change the light from dusk, and much more. Since you are not familiar with these functions, I will be happy to explain how it works. To change the weather in Rex, you need to do the following: If you want to change the dusk, for example, do the following: 1 Start Rex. 2 In the Rex window, you will see a bar on the left-hand side. Click on the cloud icon with your mouse. 3 A list of different functions will then appear at the bottom. Click on the Skies button with your mouse, then on the Dusk button. In this window, you will see two white arrows that you can use to navigate through the different scenarios (there are 26 scenarios in total). 4 Once you have found a scenario you like, click on Install now. This will install the scenario in P3D. At the top, you will see a green bar confirming that the scenery has been successfully installed in P3D. Then click on the green bar on Close. You can also use these instructions for other functions; the process is the same. I tried to install a different sunlight setting on my computer, but unfortunately it didn't work. For testing purposes, I would be very grateful if you could install a different sunlight and see if it works for you, and then let me know whether it worked or not. I suggest you install sunlight set number 4, as this set shows the difference best. To change the sunlight, simply click on the sun icon at the bottom of the list. For testing purposes, I also suggest that you change the dawn and daytime sky to see if this feature works for you. I was able to install the Rex clouds and moonlight, and it worked for me. I wish you every success. I look forward to your feedback and to hearing whether the setting works for you. Best regards, Bruno

Hi SonBrit 😀 Thank you very much for your feedback and information. I am very happy that you are supporting me in this matter. Before I posted this message in the forum, I contacted support. I explained exactly what my problem was to support. Unfortunately, support wrote back to me saying that they no longer offer support for Rex 3D Force. That's why I have to go to the forum. I have to tell you that I haven't installed any betting themes in Rex, but do everything custom. I'd now like to tell you what worked and what didn't. 1. What worked was that I was able to install the Rex clouds (they look really realistic). I was also able to change the color of the moon. 2. What didn't work was: I couldn't change the color of dawn, I couldn't change the daytime sky, and I couldn't change the color of dusk or the sunlight. I would like to ask you what settings I need to make in Rex and P3D so that I can adjust the weather manually. For example, I only want to change the light of dawn, change the daytime sky, change the light of dusk, and change the light of the sun. I have an idea. To simplify communication, I would like to ask you to send me your email address so that I can take various screenshots of Rex Skyforce and send them to you. Thank you again for your help. Best regards Bruno 😀 [email protected]

Hi SonBrit 😀 I apologize for the late reply. I would like to thank you very much for your response 😀. Your reply has been very helpful. Now I know that the Sky Force 3D software works without any problems for you. That means the software should also work for me; the problem is probably with my P3D settings, that's where the error lies. I am happy to answer your three questions: Question 1 Yes, in P3D, the Enhanced Atmospherics function is activated in the Weather section. Question 2 I have set the clouds to Medium. Question 3 I prefer to fly when the sky is cloudy. But sometimes I also fly when the sky is clear. Yes, I used the custom function to set the clouds in P3D. Can you please tell me what settings I need to make in P3D so that the software works for me?I would like to thank you very much for your help. Best regards from Switzerland Bruno 😀

Hi everyone 😀 I need your help again. I work with Prepar 3D V 5.3, which works without any problems. I have installed Zurich Kloten Airport. I would like to add AI aircraft to this airport. I have already looked on the internet to see if there is any useful software that can be used to add AI aircraft to the airport. After a long search, I was disappointed: the programs I found are either unusable or far too complicated to use. However, I did find one program that I'm very interested in and would like to use. It's called AI Live Traffic for P3D V 5. https://youtu.be/BUnnCSVgMJ4 The program is very simple and user-friendly. Unfortunately, there is a small problem. In order for the program to add the aircraft to the airport, you first have to install them. The video says that you should install the so-called “FLAI Library Package.” I searched the entire internet to find where to download this package, but unfortunately I couldn't find it anywhere. I also contacted support, but unfortunately I did not receive a response. Since the program is already a few years old, it is possible that support is no longer available. Now my question to you is: can anyone tell me where I can find this FLAI Library Package on the internet? If anyone has found the package, I would be VERY grateful if you could send me the direct download link. I also searched for alternative AI aircraft for AI Live Traffic, but unfortunately I didn't find anything. I would be very grateful if you could organize such AI aircraft for me, but please note that they must be compatible with the AI Live Traffic program. If anyone is already using this program, I would be grateful if they could send me the direct download link for their AI aircraft. If anyone is interested in installing AI aircraft in the simulator, I highly recommend this program. As I said, it is very easy to use and you don't need any programming knowledge. Take a look at the video. The link is above. I would like to thank you in advance for your help. Best regards to all, Bruno 😀

Hi Ray, 😀 Thank you very much for your reply. Please delete this text... Then I tested whether the program works in P3D. To test it, I wanted to change the moon colors. In P3D, the original moon color is gray. In Rex, I changed the color to yellow and also installed this texture. Then I restarted P3D to see if the changes had been made. Unfortunately, I found that there had been no change. The moon color was still gray. I had the same problem with the different cloud textures. Insert this text... Then I tested whether the program works with P3D. To test this, I installed a different cloud structure. In Rex, I selected a different thundercloud structure and installed this texture as well. The installation was successful. I then started P3D to test whether the changes had been applied. I activated the thunderclouds in P3D, but unfortunately I found that the changes had not been applied; the original 3D clouds from P3D still appeared. I have the same problem with the twilight lighting. I selected and installed a different twilight in Rex, and the installation was also successful. I tested in P3D to see if the new twilight had been applied. Unfortunately, I found that it did not work. Here's another important suggestion for improvement. It would be much easier if we could edit the text ourselves, which would save you a lot of work. Many thanks, Bruno

Hi Ray 😀 Thank you very much for your reply and information, which has been very helpful.However, I have the same problem with the clouds and the light from dusk. I urgently need to edit the text in my ad. Unfortunately, I saw in the forum that there is no way to edit the text.I would be very grateful if you could tell me how to do this.Thank you very much for your help. Best regards from Switzerland, Bruno 😀

HI 😀 I use the flight simulator Prepaid 3D V5.3. I have no problems with it; it works perfectly. I purchased the Rex Sky Force program (build number: 5.0.2022.0516) for P3D (V5.3). The purchase, download, and installation went smoothly. I checked the manual to see if this software is compatible with P3D version 5. The manual stated that the software is compatible with P3D V 5.I installed the software as standard and did not make any changes. I only checked that the settings were correct. I also checked that the path to P3D was set correctly, and it is. Then I tested whether the program works with P3D. To test this, I installed a different cloud structure. In Rex, I selected a different thundercloud structure and installed this texture as well. The installation was successful. I then started P3D to test whether the changes had been applied. I activated the thunderclouds in P3D, but unfortunately I found that the changes had not been applied; the original 3D clouds from P3D still appeared. I have the same problem with the twilight lighting. I selected and installed a different twilight in Rex, and the installation was also successful. I tested in P3D to see if the new twilight had been applied. Unfortunately, I found that it did not work. Unfortunately, support for REX has already expired, so I have to contact you. Because I really want to continue using this software, I really hope that someone can help me with this little problem. I would be very grateful if you could tell me what I need to do to make the Rex software work. Thank you for your help. Kind regards Bruno 😀