September 20, 200817 yr I was wondering how well it processes the clouds?What driver release are you using?
September 20, 200817 yr I have a Powercolor 4870 PCS and I have no problems with clouds. 30fps with most of the options at high and autogen at dense.Traffic: 100%.Drivers: Catalyst 8.8Very happy with the 4870.
October 4, 200817 yr Hi mate,I also have an 4870 (Sapphire)Can you please advise of the settings you're using for flightsim ??I am getting some "shimmering" that is happening from time to time even though I am not changing my settings...(i.e. I start flightsim and everything looks fine and then when I start it again I might get some shimmering).Regards,Ralf... Flight Simulator - MSFS2020 | Operating System - WIN 10 Pro | HDD - 1 x Samsung 970 Evo Plus 1TB NVME M.2 (OS) - 1 x WD Blue 1TB NVME M.2 (Software) - 1 x WD Blue (SMR) 2TB 3.5 SATA (Storage) | Main Board - MSI MAG B550 TOMAHAWK | CPU - AMD Ryzen 7, 5800X (3.8Ghz) Un-clocked | RAM - 64GB G.Skill Trident Z Neo RGB DDR4 3600Mhz | Video Card - MSI GeForce RTX 3080 Gaming X TRIO 10GB | Monitor - SAMSUNG 49" LC49RG90 ULTRAWIDE | VR Headset - HP Reverb G2 | Case - Corsair 5000D Airflow | CPU Cooling - Corsair ICUE H115i Elite Cappelix 280MM | Power Supply - Gigabyte AORUS AP850GM 850W Controls - Honeycomb Alpha Yoke & Honeycomb Bravo Throttle Quadrant + Thrustmaster TCA Sidestick Airbus Edition + CH Products Pro Pedals
October 11, 200817 yr Author >Hi mate,>>I also have an 4870 (Sapphire)>>Can you please advise of the settings you're using for>flightsim ??>>I am getting some "shimmering" that is happening from time to>time even though I am not changing my settings...(i.e. I start>flightsim and everything looks fine and then when I start it>again I might get some shimmering).>>Regards,>>Ralf... Try using FSAA and Trilinear settings within FSX, and 4x FSAA and 16X AF in the video card settings.
October 12, 200817 yr >>Hi mate,>>>>I also have an 4870 (Sapphire)>>>>Can you please advise of the settings you're using for>>flightsim ??>>>>I am getting some "shimmering" that is happening from time>to>>time even though I am not changing my settings...(i.e. I>start>>flightsim and everything looks fine and then when I start it>>again I might get some shimmering).>>>>Regards,>>>>Ralf... >>>Try using FSAA and Trilinear settings within FSX, and 4x FSAA>and 16X AF in the video card settings.Thanks mate....I will give it a try. Flight Simulator - MSFS2020 | Operating System - WIN 10 Pro | HDD - 1 x Samsung 970 Evo Plus 1TB NVME M.2 (OS) - 1 x WD Blue 1TB NVME M.2 (Software) - 1 x WD Blue (SMR) 2TB 3.5 SATA (Storage) | Main Board - MSI MAG B550 TOMAHAWK | CPU - AMD Ryzen 7, 5800X (3.8Ghz) Un-clocked | RAM - 64GB G.Skill Trident Z Neo RGB DDR4 3600Mhz | Video Card - MSI GeForce RTX 3080 Gaming X TRIO 10GB | Monitor - SAMSUNG 49" LC49RG90 ULTRAWIDE | VR Headset - HP Reverb G2 | Case - Corsair 5000D Airflow | CPU Cooling - Corsair ICUE H115i Elite Cappelix 280MM | Power Supply - Gigabyte AORUS AP850GM 850W Controls - Honeycomb Alpha Yoke & Honeycomb Bravo Throttle Quadrant + Thrustmaster TCA Sidestick Airbus Edition + CH Products Pro Pedals
October 13, 200817 yr Author >I have a Powercolor 4870 PCS and I have no problems with>clouds. 30fps with most of the options at high and autogen at>dense.>Traffic: 100%.>>Drivers: Catalyst 8.8>>Very happy with the 4870. I just ordered a PowerColor 4870 1GB from NewEgg.What your system specification?
October 17, 200817 yr Author My PowerColor 4870 1GB runs FSX extremely well.No problems with clouds.Altered the BIOS to change the fan scaling speed.Using Cat 8.9 right now.
October 19, 200817 yr My experience with a Powercolor HD4870 1 GB card has been just the opposite of those folks who have replied so far. I'm getting very poor results compared with my previous card, which was an 8800GT, and I'm desperate to find a solution for the stutters I'm suddenly experiencing. I'm using the latest Catalyst drivers (V8.1) with: AA set to 4x edge detectAF set to 16xCatalyst AI set to AdvancedMipmap detail set to High QualityWait for vertical refresh on (same as nVidia's VSync I guess, and HAS to be on or I get screen tearing, probably because I use FS Force)Adaptive AA is enabled at max.I run 1920 x 1200 locked at 30 fps (for smooth panning with TrackIR)All the other settings within FSX are as recommended for FTX.Any suggestions for better settings? Resolution changes make no difference to frame rates. I get no change setting the frame rates within FSX to unlimited. The card works fine in Crysis; it's just in FSX that I have major issues.Cheers,Noel. 11th Gen i9-11900K @ 3.5GHz | nVidia GeForce RTX 3080 | Corsair 64 GB RAM | Samsung 970 EVO Plus 2TB | Asus 27" RoG G-Sync Track IR5 | Thrustmaster Warthog | CH Products Pedals
October 19, 200817 yr Author If your are over-clocking your system this could be an issue.You might have to turn it back a bit.Virtualwombat, I would try the following.First use the 8.9 or 8.10 driver release. I am using 8.9 right now.The 8.10 release has a slider for the fan. Try 8.9 first since we have the same card. Don't forget to use DriverSweeper.in ccc -set standard settings to quality after first moving it to performance, and leave all settings the way they are.enable Overdriveset your fan speed to 35% (use Rivatuner or whatever)run auto-tune (tell us what clocks you get)test custom clocks and then acceptin fsx use in settings (on tabs left to right) - use AA by checking it tri-linear filtering unlimted frame rate global texture very high uncheck lens, bloom and animations 2-d cockpit check high-resolution check aircraft landing lights illuminate others unchecked first four sliders on the left to max right water to low 2.x scenery complexity to dense autogen off for now (depends on what your cpu can to) ground shadows off special effects low cloud draw to left thermal none detailed clouds at medium traffic tab to whatever your cpu can handleRUN FSX and tell us how it is. Try the Baron 58 at KPHL runway 8 and just take note of the framerate while sitting on the runway.If FSX runs well then you can experiment with higher settings.
October 19, 200817 yr >I'm getting very poor results compared with my previous card,>which was an 8800GT, and I'm desperate to find a solution for>the stutters I'm suddenly experiencing.To start I would never go from a Nvidia video card to an ATI card without a fresh OS install. Nvidia Gaming:ASUS RAMPAGE FORMULA (Intel X48 chipset) BIOS 410Intel Core 2 Duo E8600 w/Thermalright Ultra-120 ExtremeOCZ Titanium XTC 4GB (2 x 2GB) DDR2 800 (PC2 6400)EVGA GTX 280 FTW (178.24 Drivers)Creative Sound Blaster X-Fi Titanium Fatal1ty2x Western Digital Raptor 74GB (RAID 0) - Vista Ultimate 64 Bit/SP1SILVERSTONE 1200Watt DASILVERSTONE TJ09-BATI Gaming:ASUS Rampage Extreme BIOS 0501Intel Core 2 Quad Q9650 w/Thermalright True Black Ultra-120 eXtremeOCZ Intel Extreme Edition 4GB (2 x 2GB) DDR3 1600 (PC3 12800)ATI 4870X2 (Catalyst 8.10)Creative Sound Blaster X-Fi Titanium Fatal1ty2x Western Digital Raptor 74GB (RAID 0) - Vista Ultimate 64 Bit/SP1PC Power & Cooling T1KWSR 1000WLIAN LI PC-A70B
October 19, 200817 yr Author >>I'm getting very poor results compared with my previous>card,>>which was an 8800GT, and I'm desperate to find a solution>for>>the stutters I'm suddenly experiencing.>>>To start I would never go from a Nvidia video card to an ATI>card without a fresh OS install. >>>>Nvidia Gaming:>>ASUS RAMPAGE FORMULA (Intel X48 chipset) BIOS 410>Intel Core 2 Duo E8600 w/Thermalright Ultra-120 Extreme>OCZ Titanium XTC 4GB (2 x 2GB) DDR2 800 (PC2 6400)>EVGA GTX 280 FTW (178.24 Drivers)>Creative Sound Blaster X-Fi Titanium Fatal1ty>2x Western Digital Raptor 74GB (RAID 0) - Vista Ultimate 64>Bit/SP1>SILVERSTONE 1200Watt DA>SILVERSTONE TJ09-B>waste of time, I do it all the time>>>ATI Gaming:>>ASUS Rampage Extreme BIOS 0501>Intel Core 2 Quad Q9650 w/Thermalright True Black Ultra-120>eXtreme>OCZ Intel Extreme Edition 4GB (2 x 2GB) DDR3 1600 (PC3 12800)>ATI 4870X2 (Catalyst 8.10)>Creative Sound Blaster X-Fi Titanium Fatal1ty>2x Western Digital Raptor 74GB (RAID 0) - Vista Ultimate 64>Bit/SP1>PC Power & Cooling T1KWSR 1000W>LIAN LI PC-A70B>>
October 19, 200817 yr Thanks for the suggestions guys! I'll try them out on my system tonight and let you know the results.Cheers,Noel. 11th Gen i9-11900K @ 3.5GHz | nVidia GeForce RTX 3080 | Corsair 64 GB RAM | Samsung 970 EVO Plus 2TB | Asus 27" RoG G-Sync Track IR5 | Thrustmaster Warthog | CH Products Pedals
October 20, 200817 yr >How many people here have problems and how many millions>don't?How many millions wouldn
Create an account or sign in to comment