After i solved the take off problem i found another one . I started a flight, saved it after some time of flying but when i reloaded the flight every gaguge and instrument was black. It's like the entire airplane is shut down but the engines are still working. PS - it's about the 737-700 FS9, probably it's the same problem with the other versions.Thanks you and i hope someone can help me :(

After i solved the take off problem i found another one . I started a flight, saved it after some time of flying but when i reloaded the flight every gaguge and instrument was black. It's like the entire airplane is shut down but the engines are still working. PS - it's about the 737-700 FS9, probably it's the same problem with the other versions.Thanks you and i hope someone can help me :(

George, don't forget you need to sign all of your posts. I recommend adding a signature line on your profile. The NG doesn't have a save flight option. This could explain your issue.

Oh, i'm sorry. But i don't remember that good, but i think it worked in the past. It sucks, ariane has the same problem.Well i'm still waiting for a reply, hopefully someone will have a solution to my problemGeorge Irimescu

Perhaps FS9 turned off the electricals? I've seen the alternators off line in some loads, worth a look on the overhead to see what's on/off.

After i solved the take off problem i found another one . I started a flight, saved it after some time of flying but when i reloaded the flight every gaguge and instrument was black. It's like the entire airplane is shut down but the engines are still working. PS - it's about the 737-700 FS9, probably it's the same problem with the other versions.Thanks you and i hope someone can help me :(

(edited)The way the sim behaves when powered up is sometimes a mystery for me. I have saved a couple of flights "in the air" (for landing practice ...) and I use them from time to time without problems. But I almost always start from a "cold and dark" config. On the other hand, sometimes - even after saving a flight "cold and dark" after a proper shut down - if I reload the file, the engines are running and I have to shut them down again. (This is not a problem for me since I use FS2Crew and have to re-load the plane anyway if starting from a saved file.)Go figure ! :( Hope this helps,BrunoPS : And sometimes, even if you power the plane properly (battery, then ground power or APU/APU GENs), the displays won't come on immediately. Maybe this is the way the real machine works with the nav display remaining blank until the IRS is aligned? (maybe a RW 737 pilot can confirm this?).

when i start the flight i don't select nothing, i mean the airplane is not in cold and dark config. all systems are running including engines, electronics etc. When i reload the flight, the airplane is like in a cold and dark config. but the engines are still running. Airplane is flyable except that i don't have any working engines. I will try to make a flight in which i will start from a cold and dark config. and see if it works.